Nissan Versa Sedan. Instruction — part 453
FOREWORD
This instruction contains maintenance and repair procedure for the 2014
NISSAN VERSA SEDAN.
In order to assure your safety and the efficient functioning of the vehicle,
this instruction should be read thoroughly. It is especially important that the
PRECAUTIONS in the GI section be completely understood before starting
any repair task.
All information in this instruction is based on the latest product information
at the time of publication. The right is reserved to make changes in specifi-
cations and methods at any time without notice.
IMPORTANT SAFETY NOTICE
T
he proper performance of service is essential for both the safety of
the technician and the efficient functioning of the vehicle.
The service methods in this Instruction are described in such a
manner that the service may be performed safely and accurately.
Service varies with the procedures used, the skills of the technician
and the tools and parts available. Accordingly, anyone using service
procedures, tools or parts which are not specifically recommended
by NISSAN must first be completely satisfied that neither personal
safety nor the vehicle’s safety will be jeopardized by the service
method selected.
PLEASE HELP MAKE THIS SERVICE MANUAL BETTER!
Your comments are important to NISSAN and will help us to improve our Service Instructions.
Use this form to report any issues or comments you may have regarding our Service Manuals.
Please print this form and type or write your comments below. Mail or fax to:
Nissan North America, Inc.
Technical Service Information
39001 Sunrise Drive, P.O. Box 9200
Farmington Hills, MI USA 48331
FAX: (248) 488-3880
SERVICE MANUAL: Model:
Year:
PUBLICATION NO. (Refer to Quick Reference Index ):
Please describe any Instruction issues or problems in detail:
Page number(s)
Note: Please include a copy of each page, marked with your comments.
Are the trouble diagnosis procedures logical and easy to use? (circle your answer)
YES
NO
If no, what page number(s)?
Note: Please include a copy of each page, marked with your comments.
Please describe the issue or problem in detail:
Is the organization of the instruction clear and easy to follow? (circle your answer)
YES
NO
Please comment:
What information should be included in NISSAN Service Instructions to better support you in servicing or
repairing customer vehicles?
DATE:
YOUR NAME:
POSITION:
DEALER:
DEALER NO.:
ADDRESS:
CITY:
STATE/PROV./COUNTRY:
ZIP/POSTAL CODE:
201
4
QUICK REFERENCE CHART: VERSA SEDAN
QUICK REFERENCE CHART: VERSA SEDAN
Engine Tune-up Data
INFOID:0000000008955451
GENERAL SPECIFICATIONS
Valve Timing
Unit: degree
( ): Valve timing control “ON”
Drive Belt
INFOID:0000000008955452
DRIVE BELT
Belt Deflection
*: When engine is cold.
Engine type
HR16DE
Cylinder arrangement
In-line 4
Displacement
cm
3
(cu in)
1,598 (97.51)
Bore and stroke
mm (in)
78.0
× 83.6 (3.071 ×3.291)
Valve arrangement
DOHC
Firing order
1-3-4-2
Number of piston rings
Compression
2
Oil
1
Compression ratio
9.8
Compression pressure
kPa (kg/cm
2
, psi) / 200 rpm
Standard
1,510 (15.4, 219)
Minimum
1,270 (12.95, 184)
Differential limit between cylinders
100 (1.0, 14.5)
Valve timing
: Intake valve
: Exhaust valve
a
b
c
d
e
f
216
228
11 (
−27)
ATDC
59 (-21)
ABDC
-1 (49)
ATDC
37 (-13)
BBDC
JPBIA4228ZZ
Location
Deflection adjustment *
Unit: mm (in)
Used belt
New belt
Limit
After adjusted
Drive belt
With A/C
10 (0.39)
4.9 - 5.2 (0.19 - 0.20)
4.1 - 4.4 (0.16 - 0.17)
Without A/C
9.1 (0.36)
4.3 - 4.7 (0.17 - 0.19)
3.7 - 3.9 (0.14 - 0.15)
Applied pushing force
98 N (10 kg-f, 22 lb-f)
QUICK REFERENCE CHART: VERSA SEDAN
201
4
Belt Tension and Frequency
*: When engine is cold.
Spark Plug
INFOID:0000000008955453
SPARK PLUG (PLATINUM-TIPPED TYPE)
*: Always check with the Parts Department for the latest parts information.
Front Wheel Alignment
INFOID:0000000008955358
Location
Tension adjustment *
Unit: N (kg-f,
lb-f)
Frequency adjustment *
Unit: Hz
Used belt
New belt
Used belt
New belt
Limit
After adjusted
Limit
After adjusted
Drive belt
With A/C
350 (35.7, 78.7)
881 - 951
(89.8 - 97.0,
198.1 - 213.8)
1070 - 1138
(109.1 - 116.0,
240.6 - 255.8)
145.5
230.5 - 239.5
254 - 262
Without A/C
876 - 964
(89.3 - 98.3,
196.9 - 216.7)
1064 - 1152
(108.5 - 117.5,
239.2 - 259.0)
162
256.5 - 268.5
282.5 - 293.5
Make
NGK
Standard type*
PLZKAR6A-11
Gap (nominal)
1.1 mm (0.043 in)
Item
Standard
Camber
Degree minute (Decimal degree)
Minimum
−0° 50′ (−0.83°)
Nominal
−0° 05′ (−0.08°)
Maximum
0
° 40′ (0.66°)
Left and right differ-
ence
0
° 35′ (0.58°)
Caster
Degree minute (Decimal degree)
Minimum
2
° 55′ (2.92°)
Nominal
3
° 40′ (3.67°)
Maximum
4
° 25′ (4.41°)
Left and right differ-
ence
0
° 45′ (0.75°)
Kingpin inclination
Degree minute (Decimal degree)
Minimum
11
° 00′ (11.00°)
Nominal
11
° 45′ (11.75°)
Maximum
12
° 30′ (12.50°)
SFA234AC
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст