Nissan Versa Sedan. Instruction — part 723
PASSENGER AIR BAG MODULE
SR-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
PASSENGER AIR BAG MODULE
Exploded View
INFOID:0000000009266925
Removal and Installation
INFOID:0000000009266926
WARNING:
• Before servicing, turn ignition switch OFF, disconnect both the battery negative and positive termi-
nals, then wait at least three minutes.
• Always work from the side of air bag module. Do not work in front of it.
• Do not use the air tools or electric tools for servicing.
• Always place the passenger air bag module with pad side fac-
ing upward.
: Upward
CAUTION:
• Do not insert a tool between passenger air bag module and instrument panel assembly. Doing so
may cause damage.
1.
Passenger air bag module
2.
Instrument panel assembly
Pawl
JMHIA2021GB
JMHIA1532ZZ
SR-18
< REMOVAL AND INSTALLATION >
PASSENGER AIR BAG MODULE
• Do not impact the passenger air bag module.
• Replace the passenger air bag module if it has been dropped
or sustained an impact.
• Do not insert any foreign objects (screwdriver, etc.) into the passenger air bag module.
• Do not disassemble the passenger air bag module.
• Do not expose the passenger air bag module to temperatures exceeding 90
°C (194 °F).
• Do not allow oil, grease, detergent, or water to come in contact with the passenger air bag module.
REMOVAL
1. Remove the glove box assembly. Refer to
IP-15, "Removal and Installation"
2. Disconnect the passenger air bag module harness connector
(A) from passenger air bag module.
3. Remove the passenger air bag module bolts (B).
4. Disengage passenger air bag module pawls with hands.
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not use the old bolts after removal, replace with the new bolts.
• Do not damage the harness while installing.
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
JMHIA0009ZZ
JMHIA2022ZZ
JMHIA2023ZZ
SIDE CURTAIN AIR BAG MODULE
SR-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
SIDE CURTAIN AIR BAG MODULE
Exploded View
INFOID:0000000009266927
Removal and Installation
INFOID:0000000009266928
REMOVAL
CAUTION:
• Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least three
minutes.
• Do not use air tools or electric tools for servicing.
• Always work from the side of air bag module. Do not work from the front of it.
• Always place the curtain air bag module with air bag deployment side facing upward.
• Do not cause impact to the air bag module by dropping etc. Replace the air bag module if it has been
dropped or sustained an impact.
1. Disconnect the negative and positive battery terminals, then wait at least three minutes. Refer to
2. Remove the headlining. Refer to
INT-29, "Removal and Installation"
.
3. Disconnect the harness connector from the side curtain air bag module.
• For installing/removing direct-connect SRS connectors, refer
SRC-7, "SRS Component Connectors"
4. Remove the bolts and release the adhesive tape, then remove
the side curtain air bag module.
INSTALLATION
Installation is in the reverse order of removal.
Make sure the teather in the adhesive tape area is securely attached to the front pillar before installing pillar
finisher.
CAUTION:
• Be careful not to damage the air bag harness.
• After the work is completed, make sure no system malfunction is detected by air bag warning lamp.
1.
Side curtain air bag module
2.
Side curtain air bag module connector
A.
Adhesive tape area
AWHIA0344GB
PHIA0953J
SR-20
< REMOVAL AND INSTALLATION >
SIDE CURTAIN AIR BAG MODULE
• In case a malfunction is detected by the air bag warning lamp, reset by the self-diagnosis function
and delete the memory by CONSULT.
• If a malfunction is still detected after the above operation, perform self-diagnosis to repair malfunc-
tions. Refer to
SRC-14, "Trouble Diagnosis with CONSULT"
.
• Make sure the side curtain air bag module is not twisted at any point along the vehicle when
installed.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст