Nissan Versa Sedan. Instruction — part 766
STR-6
< SYSTEM DESCRIPTION >
COMPONENT PARTS
STARTING SYSTEM (WITH INTELLIGENT KEY) : Component Parts Location
INFOID:0000000009269495
STARTING SYSTEM (WITH INTELLIGENT KEY) : Component Description
INFOID:0000000009269496
Vehicle front
1.
Starter motor
2.
Transmission range switch
3.
IPDM E/R
4.
BCM (view with instrument panel
removed)
AWBIA1488ZZ
Component part
Description
BCM
BCM controls the starter relay.
IPDM E/R
CPU inside IPDM E/R operates the starter control relay when the igni-
tion switch is in the start position.
COMPONENT PARTS
STR-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
A
STR
N
P
O
Transmission range switch
Supplies power to the starter relay and starter control relay (inside
IPDM E/R) when the selector lever is shifted into the P or N position.
Starter relay
Supplies power to starter control relay inside the IPDM E/R.
Starter motor
The starter motor plunger closes and the motor is supplied with battery
power, which in turn cranks the engine, when the S terminal is supplied
with electric power.
STR-8
< SYSTEM DESCRIPTION >
SYSTEM
SYSTEM
STARTING SYSTEM (WITHOUT INTELLIGENT KEY)
STARTING SYSTEM (WITHOUT INTELLIGENT KEY) : System Diagram
INFOID:0000000009269497
STARTING SYSTEM (WITHOUT INTELLIGENT KEY) : System Description
INFOID:0000000009269498
The starter motor plunger closes and provides a closed circuit between the battery and the starter motor. The
starter motor is grounded to the cylinder block. With power and ground supplied, the starter motor operates.
STARTING SYSTEM (WITH INTELLIGENT KEY)
AWBIA1581GB
SYSTEM
STR-9
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
A
STR
N
P
O
STARTING SYSTEM (WITH INTELLIGENT KEY) : System Diagram
INFOID:0000000009269499
STARTING SYSTEM (WITH INTELLIGENT KEY) : System Description
INFOID:0000000009269500
• When the selector lever is in the P or N position, power is supplied to starter relay and starter control relay by
the transmission range switch. The BCM and IPDM E/R (CPU) will detect the selector lever position by the
input signal.
• When the starter operating condition is meet, the IPDM E/R will turn the starter control relay ON by starter
control relay control signal.
• When engine cranking condition is meet, the BCM turns ON the starter relay by starter control relay signal.
• Then battery power is supplied to starter motor (“S” terminal) through the starter control relay and starter
relay.
ALBIA0984GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст