Nissan Versa Sedan. Instruction — part 447
EVAP CANISTER VENT CONTROL VALVE
FL-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
L
M
A
FL
N
P
O
EVAP CANISTER VENT CONTROL VALVE
Exploded View
INFOID:0000000009267712
Removal and Installation
INFOID:0000000009267713
NOTE:
The EVAP canister vent control valve can be removed without removing the EVAP canister.
REMOVAL
1. Remove the EVAP canister protector cover.
2. Disconnect EVAP canister vent control valve hose from EVAP canister.
3. Disconnect the harness connector from the EVAP canister vent control valve.
4. Turn EVAP canister vent control valve counterclockwise.
5. Remove the EVAP canister vent control valve and O-ring.
CAUTION:
Do not reuse O-ring.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not reuse O-ring.
1.
EVAP canister
2.
O-ring
3.
EVAP canister vent control valve
4.
EVAP canister vent control valve hose
ALBIA0752ZZ
(A)
: Lock
(B)
: Unlock
PBIB3091E
FL-16
< REMOVAL AND INSTALLATION >
EVAP CONTROL SYSTEM PRESSURE SENSOR
EVAP CONTROL SYSTEM PRESSURE SENSOR
Exploded View
INFOID:0000000009267714
Removal and Installation
INFOID:0000000009267715
NOTE:
The EVAP canister system pressure sensor can be removed without removing the EVAP canister.
REMOVAL
1. Remove the EVAP canister protector cover.
2. Disconnect EVAP canister purge hose from EVAP canister.
3. Disconnect EVAP control system pressure sensor.
4. Remove EVAP control system pressure sensor and O-ring.
CAUTION:
Do not reuse O-ring.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not reuse O-ring.
1.
EVAP control system pressure sensor 2.
O-ring
3.
EVAP canister
ALBIA0753ZZ
FUEL LEVEL SENSOR UNIT
FL-17
< UNIT DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
J
K
L
M
A
FL
N
P
O
UNIT DISASSEMBLY AND ASSEMBLY
FUEL LEVEL SENSOR UNIT
Disassembly and Assembly
INFOID:0000000009267716
Fuel Level Sender Unit
Disassembly
NOTE:
Before disassembly, note the proper placement of the wires to the correct terminals and correct wire routing to
the terminals.
1. Disconnect the red, white, and double black wire connectors.
ALBIA0748ZZ
1.
Harness connectors
2.
Level sending unit module
3.
Fuel temperature sensor
4.
Float arm assembly
FL-18
< UNIT DISASSEMBLY AND ASSEMBLY >
FUEL LEVEL SENSOR UNIT
• Press the tabs on the terminals to release the locking tabs.
2. Release the two clips and remove the fuel temperature sensor
from the pump assembly.
3. Release the tab (A) and slide the level sending unit module and
float arm assembly up (B) to remove.
Assembly
Assembly is in the reverse order of disassembly.
NOTE:
• Ensure proper placement of the wires to the correct terminals and correct wire routing to the terminals.
• After connecting terminals, ensure they are securely locked and can not be pulled out.
• When installing the level sending unit, push down until the tab is locked into place.
ALBIA0669ZZ
ALBIA0670ZZ
ALBIA0749ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст