Nissan Versa Sedan. Instruction — part 176
DLK-22
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
SYSTEM (INTELLIGENT KEY SYSTEM)
*: Even with a registered Intelligent Key remaining inside the vehicle, door locks can be unlocked from outside of the vehicle with a spare
Intelligent Key as long as key IDs are different.
Door lock function can be changed using “LOCK/UNLOCK BY I-KEY” mode in “WORK SUPPORT”. Refer to
BCS-20, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
.
OUTSIDE KEY ANTENNA DETECTION AREA
The outside key antenna detection area of door lock/unlock function
is in the range of approximately 80 cm (31.50 in) surrounding the
driver, passenger door handles (1). However, this operating range
depends on the ambient conditions.
HAZARD AND BUZZER REMINDER FUNCTION
For the operation check, BCM blinks hazard warning lamps (lock: 1 time, unlock: 2 times) and sounds Intelli-
gent Key warning buzzer (lock: 1 time, unlock: 2 times) when door lock or unlock operates by operation of
each door request switch.
How to Change Hazard and Buzzer Reminder Mode
BCS-20, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
AUTO DOOR LOCK FUNCTION
After door is unlocked by door request switch operation and if 30 seconds or more passes without performing
the following operation, all doors are automatically locked. However, operation check function does not acti-
vate.
Auto door lock mode can be changed by the “AUTO LOCK SET” mode in “WORK SUPPORT”. Refer to
20, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
LIST OF OPERATION RELATED PARTS
Parts marked with
× are the parts related to operation.
Each request switch operation
Operation condition
Lock
• All doors are closed
• Ignition switch is in the LOCK or OFF position
• Panic alarm is not activated
• Intelligent Key is outside the vehicle
• Intelligent Key is within outside key antenna detection area
• P position warning is not activated
Unlock
• All doors are closed
• Ignition switch is in the LOCK or OFF position
• Panic alarm is not activated
• Intelligent Key is outside the vehicle
• Intelligent Key is within outside key antenna detection area *
JMKIA4881ZZ
Operating condition
• Door switch is ON (door is open)
• BCM receives lock signal
• Push switch is pressed
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-23
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
TRUNK OPEN FUNCTION
TRUNK OPEN FUNCTION : System Description
INFOID:0000000009268725
System Diagram
TRUNK LID OPENER OPERATION
• When the BCM detects that trunk lid opener switch is pressed, it starts the outside key antenna (rear
bumper) and inside key antenna and transmits the request signal to the Intelligent Key. Then, checks that
the Intelligent Key is near the trunk lid.
• If the Intelligent Key is within the outside key antenna detection area, it receives the request signal and
transmits the key ID signal to the BCM via remote keyless entry receiver.
• BCM receives the key ID signal and compares it with the registered key ID.
OPERATION CONDITION
If the following conditions are satisfied, the trunk lid can be opened.
OUTSIDE KEY ANTENNA DETECTION AREA
Door lock function
In
te
llige
nt
Key
Re
mo
te
ke
yl
es
s en
try rec
ei
ve
r
Do
or swit
ch
Do
or requ
es
t swit
ch
Do
or loc
k ac
tu
ato
r
In
si
de
ke
y an
ten
n
a
Out
si
de ke
y a
n
ten
n
a
In
te
llige
nt
Key
wa
rnin
g
bu
zz
er
CAN co
mm
un
ic
ati
on
s
ys
tem
BC
M
Hazard w
a
rning
lamp
P
us
h-b
utt
on ig
nit
ion
s
w
itc
h
Combination meter
Door lock/unlock function
×
×
×
×
×
×
×
×
Hazard and buzzer reminder function
×
×
×
×
×
Auto door lock function
×
×
×
×
×
×
×
×
JMKIA7942GB
Trunk lid open function
Operation condition
Trunk open operation
• Vehicle speed is less than 5 km/h (3 MPH)
• Intelligent Key is within outside key antenna (rear bumper) detection area
• Trunk lid is closed
DLK-24
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
SYSTEM (INTELLIGENT KEY SYSTEM)
The outside key antenna detection area of trunk lid open function is
in the range of approximately 80 cm (31.50 in) surrounding trunk lid
opener switch (1). However, this operating range depends on the
ambient conditions.
LIST OF OPERATION RELATED PARTS
Parts marked with
× are the parts related to operation.
REMOTE KEYLESS ENTRY FUNCTION
REMOTE KEYLESS ENTRY FUNCTION : System Description
INFOID:0000000009268726
SYSTEM DIAGRAM
REMOTE KEYLESS ENTRY OPERATION
The Intelligent Key has the same functions as the remote control entry system. Therefore, it can be used in the
same manner as the remote controller by operating the door lock/unlock button.
Remote keyless entry system controls operation of the following items.
• Auto door lock
• Door lock/unlock
• Hazard and buzzer reminder
• Panic alarm
• Trunk lid open
JMKIA2512ZZ
Trunk open function
In
te
llige
nt
Key
Re
mo
te
ke
yl
es
s en
try rec
ei
ve
r
T
ru
nk
lid
op
en
er a
ct
ua
tor
T
run
k roo
m
la
m
p
swi
tch
In
si
de
ke
y an
ten
n
a
O
u
ts
ide
k
ey
an
te
nn
a (re
ar
bum
p
er)
CA
N co
mm
un
ic
ati
on
s
ys
tem
BC
M
T
ru
nk
lid
op
en
er s
w
itc
h
Combination meter
Trunk lid open function
×
×
×
×
×
×
×
×
×
×
JMKIA7943GB
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-25
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
OPERATION AREA
To check that the Intelligent Key works normally, use within 1 m (3 ft) range of each door, however the opera-
ble range may differ according to surroundings.
DOOR LOCK/UNLOCK FUNCTION
• When door lock/unlock button of the Intelligent Key is pressed, lock signal or unlock signal is transmitted
from Intelligent Key to BCM via remote keyless entry receiver.
• BCM receives the signal and compares it with the registered key ID to the vehicle.
• BCM transmits door lock/unlock signal to each door lock actuator and operates each door lock actuator,
when key ID matches. At the same time, BCM blinks hazard warning lamps (lock: 1 time, unlock: 2 times)
and sounds Intelligent Key buzzer (lock: 1 time, unlock: 2 times) as a reminder.
OPERATION CONDITION
TRUNK OPEN FUNCTION
• When trunk button of the Intelligent Key is pressed, the trunk open signal is transmitted from the Intelligent
Key to the BCM via remote keyless entry receiver.
• When BCM receives the trunk open request signal, it operates the trunk lid opener actuator and opens the
trunk.
OPERATION CONDITION
*: Pattern of trunk open button can be selected using CONSULT. Refer to
CONSULT Function (BCM - INTELLIGENT KEY)"
PANIC ALARM FUNCTION
When ignition switch is OFF, BCM transmits theft warning horn request signal to IPDM E/R. Then, IPDM E/R
turns on and off horn intermittently.
The horn sounds intermittently.
The alarm automatically turns off.
• After 25 seconds
• When BCM receives any signal from Intelligent Key
How to Change Panic Alarm Operation Mode
BCS-20, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
.
HAZARD AND BUZZER REMINDER FUNCTION
For the operation check, BCM blinks hazard warning lamps (lock: 1 time, unlock: 2 times) and sounds Intelli-
gent Key warning buzzer (lock: 1 time, unlock: 2 times) when door lock or unlock operates by each remote
controller button operation of Intelligent Key.
How to Change Hazard and Buzzer Reminder Mode
BCS-20, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
.
AUTO DOOR LOCK FUNCTION
After door is unlocked by Intelligent Key button operation and if 30 seconds or more passes without performing
the following operation, all doors are automatically locked. However, operation check function does not acti-
vate.
Remote controller operation
Operation condition
Lock
• All door are closed
• Ignition switch is in the LOCK or OFF position
• Panic alarm is not activated
• P position warning is not activated
Unlock
• Ignition switch is in the LOCK or OFF position
• Intelligent Key is outside the vehicle
• Panic alarm is not activated
• P position warning is not activated
Remote controller operation
Operation condition
Trunk open
• Press and hold the trunk open button for 0.4 second or more*
• Ignition switch is except the ON position
• Vehicle speed is less than 5 km/h (3 MPH)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст