Nissan Versa Sedan. Instruction — part 37
AV-140
< REMOVAL AND INSTALLATION >
[DISPLAY AUDIO]
USB CONNECTOR
USB CONNECTOR
Removal and Installation
INFOID:0000000009375255
REMOVAL
1. Remove the center console assembly. Refer to
IP-23, "Removal and Installation"
2. Release the pawl from the back of the center console to remove
the USB harness connector (1) using a suitable tool.
3. Disconnect the harness connector from the USB connector and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1307ZZ
AV
BLUETOOTH CONTROL UNIT
AV-141
< REMOVAL AND INSTALLATION >
[DISPLAY AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BLUETOOTH CONTROL UNIT
Removal and Installation
INFOID:0000000009375254
REMOVAL
1. Remove the trunk floor finisher.
2. Remove the trunk rear finisher.
3. Remove the trunk side finisher (RH)
4. Disconnect the harness connector (A) from Bluetooth antenna.
5. Disconnect the harness connector (B) from Bluetooth control
unit.
6. Remove the Bluetooth control unit screws (C) and the Bluetooth
control unit (1).
7. Remove the Bluetooth control unit (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1304ZZ
ALNIA1305ZZ
AV-142
< REMOVAL AND INSTALLATION >
[DISPLAY AUDIO]
STEERING AUDIO CONTROL SWITCH
STEERING AUDIO CONTROL SWITCH
Removal and Installation
INFOID:0000000009601584
REMOVAL
1. Remove the steering wheel. Refer to
ST-8, "Removal and Installation"
2. Remove the steering wheel rear finisher.
3. Remove the steering wheel audio control switches screws.
4. Remove the steering wheel audio control switches from the steering wheel.
INSTALLATION
Installation is in the reverse order of removal.
1.
Steering wheel
2.
Steering wheel audio control switches
3.
Driver air bag module
4.
Steering wheel rear finisher
ALNIA1300ZZ
AV
BLUETOOTH® ANTENNA
AV-143
< REMOVAL AND INSTALLATION >
[DISPLAY AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BLUETOOTH® ANTENNA
Removal and Installation
INFOID:0000000009375256
REMOVAL
1. Remove the rear seat cushion assembly. Refer to
SE-23, "Removal and Installation - Seat Cushion
2. Remove the rear step plate (RH).
3. Remove the rear seatback side assembly (RH).
4. Remove the rear seatback assembly (RH).
5. Remove the trunk floor finisher.
6. Remove the trunk rear finisher.
7. Remove the trunk side finisher (RH).
8. Disconnect the Bluetooth antenna from the bluetooth control unit
(A).
9. Release the four Bluetooth antenna harness clips (B).
10. Release the remaining Bluetooth antenna harness clip (B) and
remove the Bluetooth antenna screw (C).
11. Remove the Bluetooth antenna assembly (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1301ZZ
ALNIA1302ZZ
ALNIA1303ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст