Nissan Versa Sedan. Instruction — part 217

DLK-186

< REMOVAL AND INSTALLATION >

[WITH INTELLIGENT KEY SYSTEM]

OUTSIDE KEY ANTENNA

OUTSIDE KEY ANTENNA

OUTSIDE HANDLE
OUTSIDE HANDLE : Removal and Installation

INFOID:0000000009268890

REMOVAL

1. Remove the outside handle. Refer to

DLK-169, "OUTSIDE HANDLE : Removal and Installation"

.

2. Remove the handle cover screw, handle cover and door antenna.

INSTALLATION

Installation is in the reverse order of removal.

REAR BUMPER
REAR BUMPER : Removal and Installation

INFOID:0000000009268891

REMOVAL

1. Remove the rear bumper fascia. Refer to

EXT-20, "Removal and Installation"

.

2. Remove clips (A) and the outside key antenna (rear bumper)

(1).

INSTALLATION

Installation is in the reverse order of removal.

MIIB0136E

JMKIA7952ZZ

INTELLIGENT KEY WARNING BUZZER

DLK-187

< REMOVAL AND INSTALLATION >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

INTELLIGENT KEY WARNING BUZZER

Removal and Installation

INFOID:0000000009268892

REMOVAL

Remove bolt (A) and the Intelligent Key warning buzzer (1).

INSTALLATION

Installation is in the reverse order of removal.

JMKIA7949ZZ

DLK-188

< REMOVAL AND INSTALLATION >

[WITH INTELLIGENT KEY SYSTEM]

REMOTE KEYLESS ENTRY RECEIVER

REMOTE KEYLESS ENTRY RECEIVER

Removal and Installation

INFOID:0000000009268893

REMOVAL

1. Remove the glove box. Refer to

IP-22, "Removal and Installation"

.

2. Remove the remote keyless entry receiver bolt (A).
3. Disconnect the harness connector from remote keyless entry

receiver and remove remote keyless entry receiver (1)

INSTALLATION

Installation is in the reverse order of removal.

JMKIA7947ZZ

INTELLIGENT KEY BATTERY

DLK-189

< REMOVAL AND INSTALLATION >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

INTELLIGENT KEY BATTERY

Removal and Installation

INFOID:0000000009268894

1. Release the lock knob at the back of the Intelligent Key and remove the mechanical key.

2. Insert a suitable tool (A) wrapped with a cloth into the slit of the

corner and twist it to separate the upper part from the lower part.

CAUTION:

• Do not touch the circuit board or battery terminal.

• The key fob is water-resistant. However, if it does get wet,

immediately wipe it dry.

3. Replace the battery with new one.

4. Align the tips of the upper and lower parts, and then push them

together until it is securely closed.

CAUTION:

• When replacing battery, keep dirt, grease, and other for-

eign materials off the electrode contact area.

• After replacing the battery, check that all Intelligent Key

functions work normally.

PIIB6221E

Battery replacement

:Coin-type lithium battery
(CR2025)

PIIB6222E