Nissan Versa Sedan. Instruction — part 884
TM-442
< REMOVAL AND INSTALLATION >
[CVT: RE0F11A]
PRIMARY SPEED SENSOR
PRIMARY SPEED SENSOR
Exploded View
INFOID:0000000009268261
Removal and Installation
INFOID:0000000009268262
REMOVAL
1. Remove the front LH wheel and tire. Refer to
2. Remove the LH fender protector. Refer to
EXT-26, "Removal and Installation"
.
3. Disconnect the harness connector from primary speed sensor.
4. Remove the primary speed sensor.
5. Remove the O-ring from the primary speed sensor.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-ring.
• Apply Genuine NISSAN CVT Fluid NS-3 to the O-ring.
Inspection and Adjustment
INFOID:0000000009268263
INSPECTION AFTER INSTALLATION
Check for CVT fluid leakage. Refer to
.
ADJUSTMENT AFTER INSTALLATION
Adjust the CVT fluid level. Refer to
.
1.
Transaxle assembly
2.
O-ring
3.
Primary speed sensor
Front
: Genuine NISSAN CVT Fluid NS-3
JSDIA1880GB
SECONDARY SPEED SENSOR
TM-443
< REMOVAL AND INSTALLATION >
[CVT: RE0F11A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
SECONDARY SPEED SENSOR
Exploded View
INFOID:0000000009268264
Removal and Installation
INFOID:0000000009268265
REMOVAL
1. Remove the front LH wheel and tire. Refer to
2. Remove the fender protector (LH). Refer to
EXT-26, "Removal and Installation"
3. Disconnect the harness connector from secondary speed sensor.
4. Remove the secondary speed sensor.
5. Remove the O-ring from the secondary speed sensor.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-ring.
• Apply Genuine NISSAN CVT Fluid NS-3 to the O-ring.
Inspection and Adjustment
INFOID:0000000009268266
INSPECTION AFTER INSTALLATION
Check for CVT fluid leakage. Refer to
.
ADJUSTMENT AFTER INSTALLATION
Adjust the CVT fluid level. Refer to
.
1.
Transaxle assembly
2.
O-ring
3.
Secondary speed sensor
Front
: Genuine NISSAN CVT Fluid NS-3
JSDIA1881GB
TM-444
< REMOVAL AND INSTALLATION >
[CVT: RE0F11A]
OUTPUT SPEED SENSOR
OUTPUT SPEED SENSOR
Exploded View
INFOID:0000000009268267
Removal and Installation
INFOID:0000000009268268
REMOVAL
1. Disconnect the harness connector from output speed sensor.
NOTE:
Lift up the vehicle and perform the work from rear of the transaxle assembly.
2. Remove the output speed sensor.
3. Remove the O-ring from the output speed sensor.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-ring.
• Apply Genuine NISSAN CVT Fluid NS-3 to the O-ring.
Inspection and Adjustment
INFOID:0000000009268269
INSPECTION AFTER INSTALLATION
Check for CVT fluid leakage. Refer to
.
ADJUSTMENT AFTER INSTALLATION
Check the CVT fluid level. Refer to
1.
Transaxle assembly
2.
Output speed sensor
3.
O-ring
Front
Genuine NISSAN CVT Fluid NS-3
JSDIA1882GB
DIFFERENTIAL SIDE OIL SEAL
TM-445
< REMOVAL AND INSTALLATION >
[CVT: RE0F11A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
DIFFERENTIAL SIDE OIL SEAL
Exploded View
INFOID:0000000009268270
Removal and Installation
INFOID:0000000009268271
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spill-
ing.
REMOVAL
1. Remove the front drive shaft from the transaxle assembly. Refer to
FAX-15, "Removal and Installation"
2. Remove the differential side oil seal using suitable tool.
CAUTION:
When removing the differential side oil seal, be careful not to scratch the oil seal mating surfaces
of the transaxle case and converter housing.
INSTALLATION
1. Drive the differential side oil seal into the transaxle case side (A)
and converter housing side (B) using suitable tool to the speci-
fied dimension.
CAUTION:
• Be careful not to scratch the lip of the differential side oil seal
when press-fitting it.
• Do not reuse differential side oil seal.
• Apply Genuine NISSAN CVT Fluid NS-3 to the differential side
oil seal lip and around the oil seal.
2. Install the front drive shaft. Refer to
FAX-15, "Removal and Installation"
.
Inspection and Adjustment
INFOID:0000000009268272
INSPECTION AFTER INSTALLATION
Check for CVT fluid leakage. Refer to
.
ADJUSTMENT AFTER INSTALLATION
1.
Transaxle assembly
2.
Differential side oil seal (left side)
3.
Differential side oil seal (right side)
Front
Genuine NISSAN CVT Fluid NS-3
JSDIA1888ZZ
Dimension (C)
: 1.8
± 0.5 mm (0.071 ± 0.020 in).
Dimension (D)
: 1.8
± 0.5 mm (0.071 ± 0.020 in).
JSDIA1836ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст