Nissan Versa Sedan. Instruction — part 201

DLK-122

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

KEY REMINDER FUNCTION DOES NOT OPERATE

KEY REMINDER FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000009268820

1.

CHECK ANTI KEY LOCK IN FUNCTI SETTING IN WORK SUPPORT

1. Select INTELLIGENT KEY of BCM using CONSULT.

2. Select ANTI KEY LOCK IN FUNCTI in WORK SUPPORT mode.

3. Check ANTI KEY LOCK IN FUNCTI setting in WORK SUPPORT.

Refer to

BCS-20, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Set On in ANTI KEY LOCK IN FUNCTI.

2.

CHECK DOOR SWITCH

Check door switch.

Refer to

DLK-89, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.

• Instrument center: Refer to

DLK-66, "DTC Logic"

.

• Console: Refer to

DLK-68, "DTC Logic"

.

• Trunk room: Refer to

DLK-70, "DTC Logic"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK UNLOCK SENSOR

Check unlock sensor.

Refer to

DLK-85, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

REPLACE BCM

1. Replace BCM. Refer to

BCS-69, "Removal and Installation"

.

2. Confirm the operation after replacement.
Is the result normal?

YES

>> Inspection End.

NO

>> Check intermittent incident. Refer to

GI-45, "Intermittent Incident"

.

OFF POSITION WARNING DOES NOT OPERATE

DLK-123

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

OFF POSITION WARNING DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000009268821

1.

CHECK DTC WITH BCM

Check that DTC is not detected with BCM
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

2.

CHECK DTC WITH COMBINATION METER

Check that DTC is not detected with combination meter
Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

3.

CHECK DOOR SWITCH

Check front door switch (driver side).

Refer to

DLK-89, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK COMBINATION METER BUZZER

Check combination meter buzzer.

Refer to

DLK-79, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.

Refer to

DLK-79, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

REPLACE BCM

1. Replace BCM. Refer to

BCS-69, "Removal and Installation"

.

2. Confirm the operation after replacement.
Is the result normal?

YES

>> Inspection End.

NO

>> Check intermittent incident. Refer to

GI-45, "Intermittent Incident"

.

DLK-124

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

P POSITION WARNING DOES NOT OPERATE

P POSITION WARNING DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000009268822

1.

CHECK DTC WITH BCM

Check that DTC is not detected with BCM
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

2.

CHECK DTC WITH COMBINATION METER

Check that DTC is not detected with combination meter
Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

3.

CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.

Refer to

DLK-94, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK COMBINATION METER BUZZER

Check combination meter buzzer.

Refer to

DLK-79, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK DOOR SWITCH

Check front door switch (driver side).

Refer to

DLK-89, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CHECK KEY WARNING LAMP

Check key warning lamp.

Refer to

DLK-94, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 7.

NO

>> Repair or replace the malfunctioning parts.

7.

CHECK SHIFT P WARNING LAMP

Check shift P warning lamp.

Refer to

DLK-100, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 8.

NO

>> Repair or replace the malfunctioning parts.

8.

REPLACE BCM

1. Replace BCM. Refer to

BCS-69, "Removal and Installation"

.

2. Confirm the operation after replacement.
Is the result normal?

YES

>> Inspection End.

P POSITION WARNING DOES NOT OPERATE

DLK-125

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

NO

>> Check intermittent incident. Refer to

GI-45, "Intermittent Incident"

.