Nissan Altima L32. Instruction — part 832
HAC-102
< BASIC INSPECTION >
[MANUAL AIR CONDITIONER]
INSPECTION AND ADJUSTMENT
INSPECTION AND ADJUSTMENT
Description & Conditions
INFOID:0000000004498257
DESCRIPTION
The purpose of the operational check is to confirm that the system operates properly.
CONDITIONS:
• Engine running and at normal operation temperature.
Operational Check
INFOID:0000000004498258
STEP 1: Check Blower
1. Turn blower control dial clockwise, blower should operate on low speed.
2. Continue turning blower control dial clockwise, and continue checking blower speeds until all speeds are
checked.
3. Leave blower on HI speed.
If NG, go to
HAC-127, "Diagnosis Procedure"
.
If OK, continue with next check.
STEP 2: Check Discharge Air
1. Press each mode switch and press DEF (
) switch.
2. Each mode position indicator should illuminate.
3. Confirm that discharge air comes out according to the air distribution table. Refer to
.
NOTE:
Confirm that the compressor clutch is engaged (audio or visual inspection) and intake door is in the FRE
(
) position when the DEF (
) is selected.
Intake door position is checked in the next step.
HAC-124, "Diagnosis Procedure"
.
If OK, continue with next check.
STEP 3: Check Recirculation
1. Press REC (
) switch.
Recirculation indicator should illuminate.
2. Press REC (
) switch a second time.
3. Listen for intake door position change (you should hear blower sound change slightly).
If NG, go to
HAC-124, "Diagnosis Procedure"
.
If OK, continue with next check.
STEP 4: Check Temperature Decrease
1. Turn the temperature dial counterclockwise to maximum cold.
2. Check for cold air at discharge air outlets.
If NG, go to
HAC-122, "Diagnosis Procedure"
.
If OK, continue with next check.
STEP 5: Check Temperature Increase
1. Turn the temperature dial clockwise to maximum heat.
2. Check for hot air at discharge air outlets.
If NG, go to
HAC-122, "Diagnosis Procedure"
.
If OK, continue with next check.
STEP 6: Check Air Conditioner Switch (if equipped)
1. Turn blower control dial to the desired position and push the A/C switch to turn ON the air conditioner
INSPECTION AND ADJUSTMENT
HAC-103
< BASIC INSPECTION >
[MANUAL AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
2. Confirm that the A/C indicator illuminates and that the compressor clutch engages (audio or visual inspec-
tion).
HAC-135, "Diagnosis Procedure"
, then if necessary,
HAC-131, "Diagnosis Procedure"
.
If OK, listen to customer complaint (get detailed information about the conditions and environment when the
symptom occurs). Verify the symptom and refer to
HAC-104
< FUNCTION DIAGNOSIS >
[MANUAL AIR CONDITIONER]
FUNCTION INFORMATION
FUNCTION DIAGNOSIS
FUNCTION INFORMATION
Component Part Location
INFOID:0000000004498259
ENGINE COMPARTMENT
QR25DE Models
AWIIA1233ZZ
FUNCTION INFORMATION
HAC-105
< FUNCTION DIAGNOSIS >
[MANUAL AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
VQ35DE Models
PASSENGER COMPARTMENT
1.
A/C compressor F3
2.
Refrigerant pressure sensor E219
3.
A/C relay (internal to IPDM E/R)
AWIIA1234ZZ
1.
A/C compressor F3
2.
Refrigerant pressure sensor E219
3.
A/C relay (internal to IPDM E/R)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст