Nissan Altima L32. Instruction — part 686
EXL-28
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
1: With auto light system.
2: The item is indicated, not monitored.
ACTIVE TEST
TURN SIGNAL R
[ON/OFF]
Each switch status that BCM judges from the combination switch reading function
TURN SIGNAL L
[ON/OFF]
TAIL LAMP SW
[ON/OFF]
HI BEAM SW
[ON/OFF]
HEAD LAMP SW1
[ON/OFF]
HEAD LAMP SW2
[ON/OFF]
PASSING SW
[ON/OFF]
AUTO LIGHT SW
1
[ON/OFF]
FR FOG SW
[ON/OFF]
DOOR SW-DR
[ON/OFF]
The switch status input from front door switch LH
DOOR SW-AS
[ON/OFF]
The switch status input from front door switch RH
DOOR SW-RR
[ON/OFF]
The switch status input from rear door switch RH
DOOR SW-RL
[ON/OFF]
The switch status input from rear door switch LH
DOOR SW-BK
2
[ON/OFF]
—
OPTICAL SENSOR
[V]
1
The value of exterior brightness voltage input from the optical sensor
Monitor item
[Unit]
Description
Test item
Operation
Description
TAIL LAMP
ON
Transmits the Position light request signal to IPDM E/R with CAN com-
munication to turn the tail lamp ON.
OFF
Stops the tail lamp request signal transmission.
HEAD LAMP
HI
Transmits the high beam request signal with CAN communication to turn
the headlamp (HI)
LO
Transmits the low beam request signal with CAN communication to turn
the headlamp (LO).
OFF
Stops the high & low beam request signal transmission.
FR FOG LAMP
ON
Transmits the front fog lights request signal to IPDM E/R with CAN com-
munication to turn the front fog lamp ON.
OFF
Stops the front fog lights request signal transmission.
DAYTIME RUNNING LIGHT*
ON
—
OFF
DIAGNOSIS SYSTEM (BCM)
EXL-29
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
*: The item is indicated, not monitored.
FLASHER
FLASHER : CONSULT-III Function
INFOID:0000000004498159
Work support
* : Initial setting
Data monitor
Active test
COMB SW
COMB SW : CONSULT-III Function
INFOID:0000000004498160
DATA MONITOR
CORNERING LAMP*
RH
—
LH
OFF
ILL DIM SIGNAL*
ON
—
OFF
Test item
Operation
Description
Service item
Setting item
Setting
HAZARD ANSWER
BACK
LOCK ONLY*
Activated when locking.
Sets the hazard warning lamp answer back activation
when the door is lock/unlock with the request switch or
the key fob.
UNLK ONLY
Activated when unlock-
ing.
LOCK/UNLK
Activated when locking/
unlocking
OFF
Not activated
Monitor item
[Unit]
Description
TURN SIGNAL R
[ON/OFF]
Each switch condition that BCM judges from the combination switch reading function
TURN SIGNAL L
[ON/OFF]
HAZARD SW
[ON/OFF]
The switch status input from the hazard warning switch
RKE LOCK
[ON/OFF]
The lock signal status received from the keyless receiver
RKE UNLOCK
[ON/OFF]
The unock signal status received from the keyless receiver
RKE PANIC
[ON/OFF]
The panic alarm signal status received from the keyless receiver
Test item
Operation
Description
FLASHER
RH
Blinks right turn signal lamp.
LH
Blinks left turn signal lamp.
OFF
Turns turn signal lamps (right and left) OFF.
EXL-30
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
*: With autolamp system
BATTERY SAVER
BATTERY SAVER : CONSULT-III Function
INFOID:0000000004498161
WORK SUPPORT
* : Initial setting
DATA MONITOR
Monitor item [UNIT]
Description
FR WIPER HI
[OFF/ON]
Displays the status of the FR WIPER HI switch in combination switch judged by BCM with the combination
switch reading function.
FR WIPER LOW
[OFF/ON]
Displays the status of the FR WIPER LOW switch in combination switch judged by BCM with the combination
switch reading function.
FR WASHER SW
[OFF/ON]
Displays the status of the FR WASHER switch in combination switch judged by BCM with the combination
switch reading function.
FR WIPER INT
[OFF/ON]
Displays the status of the FR WIPER INT switch in combination switch judged by BCM with the combination
switch reading function.
FR WIPER STOP
[OFF/ON]
Displays the status of the front wiper stop position signal received from IPDM E/R via CAN communication.
INT VOLUME
[1 - 7]
Displays the status of wiper intermittent dial position judged by BCM with the combination switch reading
function
TURN SIGNAL R
[OFF/ON]
Displays the status of theTURN RH switch in combination switch judged by BCM with the combination switch
reading function.
TURN SIGNAL L
[OFF/ON]
Displays the status of theTURN LH switch in combination switch judged by BCM with the combination switch
reading function.
TAIL LAMP SW
[OFF/ON]
Displays the status of the TAIL LAMP switch in combination switch judged by BCM with the combination
switch reading function.
HI BEAM SW
[OFF/ON]
Displays the status of the HI BEAM switch in combination switch judged by BCM with the combination switch
reading function.
HEAD LAMP SW 1
[OFF/ON]
Displays the status of the HEADLAMP 1 switch in combination switch judged by BCM with the combination
switch reading function.
HEAD LAMP SW 2
[OFF/ON]
Displays the status of the HEADLAMP 2 switch in combination switch judged by BCM with the combination
switch reading function.
PASSING SW
[OFF/ON]
Displays the status of the PASSING switch in combination switch judged by BCM with the combination switch
reading function.
AUTO LIGHT SW*
[OFF/ON]
Displays the status of the AUTO LIGHT switch in combination switch judged by BCM with the combination
switch reading function.
FR FOG SW
[OFF/ON]
Displays the status of the FR FOG switch in combination switch judged by BCM with the combination switch
reading function.
Service item
Setting item
Setting
BATTERY SAVER SET
ON*
With the exterior lamp battery saver function
OFF
Without the exterior lamp battery saver function
ROOM LAMP BAT SAV SET
ON*
With the interior room lamp battery saver function
OFF
Without the interior room lamp battery saver function
ROOM LAMP TIMER SET
MODE 1*
30 min.
Sets the interior room lamp battery saver timer operating
time.
MODE 2
60 min.
DIAGNOSIS SYSTEM (BCM)
EXL-31
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
ACTIVE TEST
* : Each lamp switch is in ON position.
Monitor item
[Unit]
Description
REQ SW-DR
[ON/OFF]
The switch status input from request switch (driver side)
REQ SW-AS
[ON/OFF]
The switch status input from front request switch (passenger side)
PUSH SW
[ON/OFF]
The switch status input from push-button ignition switch
KEY SW-SLOT
[ON/OFF]
Key switch status input from key slot
DOOR SW-DR
[ON/OFF]
The switch status input from front door switch LH
DOOR SW-AS
[ON/OFF]
The switch status input from front door switch RH
DOOR SW-RR
[ON/OFF]
The switch status input from rear door switch RH
DOOR SW-RL
[ON/OFF]
The switch status input from rear door switch LH
DOOR SW-BK
[ON/OFF]
NOTE:
The item is indicated, not monitored.
CDL LOCK SW
[ON/OFF]
Lock switch status received from central door lock switch by power window switch se-
rial link
CDL UNLOCK SW
[ON/OFF]
Unlock switch status received from central door lock switch by power window switch
serial link
KEY CYL LK-SW
[ON/OFF]
Lock switch status received from key cylinder switch by power window switch serial
link
KEY CYL UN-SW
[ON/OFF]
Unlock switch status received from key cylinder switch by power window switch serial
link
TRNK/HAT MNTR
[ON/OFF]
The switch status input from trunk room lamp switch
RKE-LOCK
[ON/OFF]
Lock signal status received from remote keyless entry receiver
RKE-UNLOCK
[ON/OFF]
Unlock signal status received from remote keyless entry receiver
Test item
Operation
Description
BATTERY SAVER
OFF
Cuts the interior room lamp power supply to turn interior room lamp OFF.
ON
Outputs the interior room lamp power supply to turn interior room lamp ON.*
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст