Nissan Altima L32. Instruction — part 1092
POWER WINDOW MAIN SWITCH
PWC-135
< ECU DIAGNOSIS >
[LH ONLY ANTI-PINCH-SEDAN]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
Fail Safe
INFOID:0000000004205052
FAIL-SAFE CONTROL
Switches to fail-safe control when malfunction is detected in encoder signal that detects up/down speed and
direction of door glass. Switches to fail-safe control when error beyond regulation value is detected between
the fully closed position and the actual position of the glass.
ABKIA0662GB
PWC-136
< ECU DIAGNOSIS >
[LH ONLY ANTI-PINCH-SEDAN]
POWER WINDOW MAIN SWITCH
It changes to condition before initialization and the following functions do not operate when switched to fail-
safe control.
• Auto-up operation
• Anti-pinch function
• Retained power function
Perform initial operation to recover when switched to fail-safe mode. However, it switches back to fail-safe
control when malfunction is found in power window switch or in motor.
Error
Error condition
Pulse sensor malfunction
When only one side of pulse signal is being detected for more than the specified value.
Both pulse sensors mal-
function
When both pulse signals have not been detected for more than the specified value during glass open/
close operation.
Pulse direction malfunction
When the pulse signal that is detected during glass open/close operation detects the opposite condition
of power window motor operating direction.
Glass recognition position
malfunction 1
When it detects the error between glass fully closed position in power window switch memory and actual
fully closed position during glass open/close operation is more than the specified value.
Glass recognition position
malfunction 2
When it detects pulse count more than the value of glass full stroke during glass open/close operation.
Malfunction of not yet up-
dated closed position of
glass
When glass open/close operation is continuously performed without fully closing more than the specified
value (approximately 10 strokes).
BCM (BODY CONTROL MODULE)
PWC-137
< ECU DIAGNOSIS >
[LH ONLY ANTI-PINCH-SEDAN]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
BCM (BODY CONTROL MODULE)
Reference Value
INFOID:0000000004498118
VALUES ON THE DIAGNOSIS TOOL
Monitor Item
Condition
Value/Status
FR WIPER HI
Other than front wiper switch HI
OFF
Front wiper switch HI
ON
FR WIPER LOW
Other than front wiper switch LO
OFF
Front wiper switch LO
ON
FR WASHER SW
Front washer switch OFF
OFF
Front washer switch ON
ON
FR WIPER INT
Other than front wiper switch INT
OFF
Front wiper switch INT
ON
FR WIPER STOP
Front wiper is not in STOP position
OFF
Front wiper is in STOP position
ON
INT VOLUME
Wiper intermittent dial is in a dial position 1 - 7
Wiper intermittent dial position
TURN SIGNAL R
Other than turn signal switch RH
OFF
Turn signal switch RH
ON
TURN SIGNAL L
Other than turn signal switch LH
OFF
Turn signal switch LH
ON
TAIL LAMP SW
Other than lighting switch 1ST and 2ND
OFF
Lighting switch 1ST or 2ND
ON
HI BEAM SW
Other than lighting switch HI
OFF
Lighting switch HI
ON
HEAD LAMP SW 1
Other than lighting switch 2ND
OFF
Lighting switch 2ND
ON
HEAD LAMP SW 2
Other than lighting switch 2ND
OFF
Lighting switch 2ND
ON
PASSING SW
Other than lighting switch PASS
OFF
Lighting switch PASS
ON
AUTO LIGHT SW
Other than lighting switch AUTO
OFF
Lighting switch AUTO
ON
FR FOG SW
Front fog lamp switch OFF
OFF
Front fog lamp switch ON
ON
DOOR SW-DR
Driver door closed
OFF
Driver door opened
ON
DOOR SW-AS
Passenger door closed
OFF
Passenger door opened
ON
DOOR SW-RR
Rear door RH closed
OFF
Rear door RH opened
ON
DOOR SW-RL
Rear door LH closed
OFF
Rear door LH opened
ON
DOOR SW-BK
NOTE:
This item is displayed, but cannot be monitored.
OFF
PWC-138
< ECU DIAGNOSIS >
[LH ONLY ANTI-PINCH-SEDAN]
BCM (BODY CONTROL MODULE)
CDL LOCK SW
Other than power door lock switch LOCK
OFF
Power door lock switch LOCK
ON
CDL UNLOCK SW
Other than power door lock switch UNLOCK
OFF
Power door lock switch UNLOCK
ON
KEY CYL LK-SW
Other than driver door key cylinder LOCK position
OFF
Driver door key cylinder LOCK position
ON
KEY CYL UN-SW
Other than driver door key cylinder UNLOCK position
OFF
Driver door key cylinder UNLOCK position
ON
KEY CYL SW-TR
NOTE:
This item is displayed, but cannot be monitored.
OFF
HAZARD SW
When hazard switch is not pressed
OFF
When hazard switch is pressed
ON
REAR DEF SW
When rear window defogger switch is pressed
ON
TR CANCEL SW
Trunk lid opener cancel switch OFF
OFF
Trunk lid opener cancel switch ON
ON
TR/BD OPEN SW
Trunk lid opener switch OFF
OFF
While the trunk lid opener switch is turned ON
ON
TRNK/HAT MNTR
Trunk lid closed
OFF
Trunk lid opened
ON
RKE-LOCK
When LOCK button of Intelligent Key is not pressed
OFF
When LOCK button of Intelligent Key is pressed
ON
RKE-UNLOCK
When UNLOCK button of Intelligent Key is not pressed
OFF
When UNLOCK button of Intelligent Key is pressed
ON
RKE-TR/BD
When TRUNK OPEN button of Intelligent Key is not pressed
OFF
When TRUNK OPEN button of Intelligent Key is pressed
ON
RKE-PANIC
When PANIC button of Intelligent Key is not pressed
OFF
When PANIC button of Intelligent Key is pressed
ON
RKE-P/W OPEN
When UNLOCK button of Intelligent Key is not pressed and held
OFF
When UNLOCK button of Intelligent Key is pressed and held
ON
RKE-MODE CHG
When LOCK/UNLOCK button of Intelligent Key is not pressed and
held simultaneously
OFF
When LOCK/UNLOCK button of Intelligent Key is pressed and held
simultaneously
ON
OPTICAL SENSOR
When outside of the vehicle is bright
Close to 5 V
When outside of the vehicle is dark
Close to 0 V
REQ SW-DR
When driver door request switch is not pressed
OFF
When driver door request switch is pressed
ON
REQ SW-AS
When passenger door request switch is not pressed
OFF
When passenger door request switch is pressed
ON
REQ SW-BD/TR
When trunk request switch is not pressed
OFF
When trunk request switch is pressed
ON
PUSH SW
When engine switch (push switch) is not pressed
OFF
When engine switch (push switch) is pressed
ON
IGN RLY2-F/B
Ignition switch OFF or ACC
OFF
Ignition switch ON
ON
Monitor Item
Condition
Value/Status
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст