Nissan Altima L32. Instruction — part 1430

TM-64

< DISASSEMBLY AND ASSEMBLY >

[6MT: RS6F52A]

MAINSHAFT AND GEAR

9. Press out 3rd main gear and 2nd main gear using Tool (A) and a

puller (B).

10. Remove 2nd needle bearing.

11. Press out 2nd main gear bushing, 1st-2nd synchronizer hub

assembly, 1st main gear, 1st needle bearing, 1st main gear

bushing, and reverse main gear using Tool (A).

Assembly

INFOID:0000000004201605

1. Press in reverse main gear using Tools.

CAUTION:

• Be careful with orientation of reverse main gear.

• Do not reuse reverse main gear.

Tool number

: KV40105020 ( — )

PCIB1885E

Tool number

: KV40105020 ( — )

PCIB1886E

Tool numbers

: ST35321000 ( — )
: KV40101630 (J-35870)
: ST38220000 ( — )

PCIB0946E

SCIA0992E

MAINSHAFT AND GEAR

TM-65

< DISASSEMBLY AND ASSEMBLY >

[6MT: RS6F52A]

C

E

F

G

H

I

J

K

L

M

A

B

TM

N

O

P

2. Press in 1st main gear bushing using Tools.

3. Install 1st needle bearing and then 1st main gear.

4. Install 1st-2nd spread spring, 1st-2nd shifting insert, and 1st-2nd synchronizer hub onto 1st-2nd coupling

sleeve.

CAUTION:

• Be careful with orientation of 1st-2nd synchronizer hub.

• Do not reuse 1st-2nd synchronizer hub and 1st-2nd cou-

pling sleeve.

• Replace 1st-2nd synchronizer hub and 1st-2nd coupling

sleeve as a set.

• Be careful with orientation of 1st-2nd coupling sleeve.

• Be sure not to hook center projection of 2 spread springs

on same 1st-2nd shifting insert.

Tool numbers : ST35321000 ( — )

: KV38102510 ( — )
: ST38220000 ( — )

SCIA1049E

SCIA0921E

PCIB0803E

SCIA1083E

TM-66

< DISASSEMBLY AND ASSEMBLY >

[6MT: RS6F52A]

MAINSHAFT AND GEAR

5. Install 1st inner baulk ring, 1st synchronizer cone, and 1st outer

baulk ring onto mainshaft and then press in 1st-2nd synchro-

nizer hub assembly onto mainshaft using Tools.

CAUTION:

• Outer baulk ring, synchronizer cone, and inner baulk ring

on 2nd gear-side must have been removed.

• Be careful with orientation of coupling sleeve.

• Replace 1st inner baulk ring, 1st synchronizer cone, and 1st outer baulk ring as a set.

6. Press in 2nd main gear bushing using Tools.

7. Install 2nd outer baulk ring, 2nd synchronizer cone, and 2nd

inner baulk ring.

CAUTION:

Replace 2nd outer baulk ring, 2nd synchronizer cone, and

2nd inner baulk ring as a set.

8. Install 2nd needle bearing and 2nd main gear.

9. Press in 3rd main gear using Tools.

CAUTION:

• Be careful with orientation of 3rd main gear.

• Do not reuse 3rd main gear.

10. Install 3rd-4th mainshaft spacer.

Tool numbers

: ST35321000 ( — )
: KV38102510 ( — )
: ST38220000 ( — )

SCIA1050E

Tool numbers : ST35321000 ( — )

: KV40105710 ( — )

SCIA1051E

Tool numbers

: ST35321000 ( — )
: KV40105710 ( — )

SCIA1052E

MAINSHAFT AND GEAR

TM-67

< DISASSEMBLY AND ASSEMBLY >

[6MT: RS6F52A]

C

E

F

G

H

I

J

K

L

M

A

B

TM

N

O

P

11. Select 4th main gear adjusting shim so that dimension “C1” sat-

isfies the standard value below and install 4th main gear adjust-

ing shim onto mainshaft.

CAUTION:

Only one adjusting shim can be selected.

12. Press in 4th main gear using Tools.

CAUTION:

• Be careful with orientation of 4th main gear.

• Do not reuse 4th main gear.

13. Press in 5th main gear using Tools.

CAUTION:

• Be careful with orientation of 5th main gear.

• Do not reuse 5th main gear.

14. Install 5th-6th mainshaft spacer.

15. Press in 6th main gear using Tools (A) and (B).

CAUTION:

Do not reuse 6th main gear.

Standard value for dimension “C1” : Refer to

TM-84,

"Dimension"

.

PCIB0804E

Tool numbers

: ST33200000 (J-26082)
: ST30901000 (J-26010-01)

PCIB0947E

Tool numbers

: ST33200000 (J-26082)
: ST30901000 (J-26010-01)

PCIB0948E

Tool numbers

A: ST33200000 (J-26082)
B: ST30901000 (J-26010-01)

WCIA0313E