Nissan Altima L32. Instruction — part 111
AV-436
< PREPARATION >
[BOSE AUDIO WITH NAVIGATION]
PREPARATION
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000004206687
Tool name
Description
Power tool
Loosening bolts and nuts
PBIC0191E
AV
AUDIO UNIT
AV-437
< ON-VEHICLE REPAIR >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ON-VEHICLE REPAIR
AUDIO UNIT
Removal and Installation
INFOID:0000000004206688
REMOVAL
1. Remove cluster lid C. Refer to
IP-12, "Removal and Installation"
2. Remove cluster lid D lower finisher. Refer to
IP-12, "Removal and Installation"
3. Remove navigation audio unit upper and lower screws (A).
4. Remove the navigation audio unit bracket screws (A) and
remove the navigation audio unit bracket (1).
5. Pull out the navigation audio unit assembly, disconnect the navigation audio unit assembly connectors.
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0059ZZ
ALNIA0060ZZ
AV-438
< ON-VEHICLE REPAIR >
[BOSE AUDIO WITH NAVIGATION]
BOSE SPEAKER AMP
BOSE SPEAKER AMP
Removal and Installation - Coupe
INFOID:0000000004206689
REMOVAL
1. Disconnect the negative battery terminal.
2. Remove the trunk floor carpet and spare tire cover. Refer to
INT-23, "Removal and Installation"
.
3. Remove the RH trunk floor spacer.
4. Remove the Bose speaker amp. screws (A), then disconnect the
Bose speaker amp. connectors (B) and remove the Bose
speaker amp. (1).
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation - Sedan
INFOID:0000000004523221
REMOVAL
1. Disconnect the negative battery terminal.
2. Open the trunk lid.
3. Remove the Bose speaker amp. screws (A), then disconnect the
Bose speaker amp. connectors (B) and remove the Bose
speaker amp. (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0918ZZ
ALNIA1020ZZ
AV
CD CHANGER
AV-439
< ON-VEHICLE REPAIR >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
CD CHANGER
Removal and Installation
INFOID:0000000004206691
REMOVAL
1. Remove the Cluster D lower finisher. Refer to
IP-12, "Removal and Installation"
.
2. Put selector lever in the drive "D" position (CVT models only).
3. Put shift lever in neutral (M/T models only).
4. Using a suitable tool remove the CD changer finisher (1), then
disconnect the power socket, AUX jack connectors and remove
the CD changer finisher (1).
5. Remove the CD changer screws (A), pull out the unit, then dis-
connect the CD changer connector and remove the CD changer
(1).
6. Remove the CD changer bracket screws (A).
• CD changer brackets (1)
• CD changer (2)
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0047ZZ
ALNIA0048ZZ
ALNIA0049ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст