Nissan Altima L32. Instruction — part 915
LU-6
< PREPARATION >
[QR25DE]
PREPARATION
Tool name
Description
Power tool
Loosening bolts and nuts
Deep socket
Removing and installing oil pressure switch
Deep socket 26 mm, 3/8 drive
PBIC0190E
NT818
LUBRICATION SYSTEM
LU-7
< FUNCTION DIAGNOSIS >
[QR25DE]
C
D
E
F
G
H
I
J
K
L
M
A
LU
N
P
O
FUNCTION DIAGNOSIS
LUBRICATION SYSTEM
Lubrication Circuit
INFOID:0000000004202495
Schematic
INFOID:0000000004202496
PBIC2270E
AWBIA0035ZZ
LU-8
< FUNCTION DIAGNOSIS >
[QR25DE]
LUBRICATION SYSTEM
1.
Oil pan
2.
Oil strainer
3.
Oil pump
4.
Regulator valve
5.
Oil filter
6.
Relief valve (Built in oil filter)
7.
Oil cooler
8.
Bypass
9.
Main gallery
10. Main bearing
11. Timing chain and balancer unit tim-
ing chain oil jet
12. Connecting rod bearing
13. Timing chain and balancer unit tim-
ing chain
14. Connecting rod
15. Piston
16. Balancer unit
17. Chain tensioner
18. Camshaft bracket (No.1)
19. Cylinder head oil gallery
20. Relief valve
21. Intake camshaft bracket (No.2)
22. Intake camshaft oil passage
23. Intake camshaft journal
24. Exhaust camshaft journal
25. Exhaust camshaft oil passage
26. Exhaust camshaft bracket (No.2)
27. Front cover
28. Intake valve timing control cover
29. Intake valve timing controller
30. Intake valve timing control solenoid
valve
A.
Oil passage
B.
Return oil passage
C.
Bypass
D.
To oil pan
ENGINE OIL
LU-9
< ON-VEHICLE MAINTENANCE >
[QR25DE]
C
D
E
F
G
H
I
J
K
L
M
A
LU
N
P
O
ON-VEHICLE MAINTENANCE
ENGINE OIL
Inspection
INFOID:0000000004202497
OIL LEVEL
• Before starting the engine, check the oil level. If the engine is
already started, stop it and allow 10 minutes before checking.
• Check that the oil level is within the range on the dipstick.
• If it is out of range, add oil as necessary. Refer to
ENGINE OIL APPEARANCE
• Check engine oil for white milky or excessive contamination.
• If engine oil becomes milky, it is highly probable that it is contaminated with engine coolant. Repair or
replace damaged parts.
OIL LEAKAGE
Check for oil leakage around the following areas:
• Oil pan
• Oil pan drain plug
• Oil pressure switch
• Oil filter
• Oil cooler
• IVTC cover
• Front cover
• Mating surface between cylinder block and cylinder head
• Mating surface between cylinder head and rocker cover
• Crankshaft oil seal (front and rear)
OIL PRESSURE CHECK
WARNING:
• Be careful not to burn yourself, as engine oil may be hot.
• For M/T models, put the gearshift lever in the Neutral "N" position. For CVT models, put the selector
lever in the Park “P” position.
1. Check engine oil level. Refer to
.
2. Remove undercover using power tool.
3. Disconnect oil pressure switch harness connector at oil pressure
switch. Remove oil pressure switch and install Tools.
CAUTION:
Do not drop or shock oil pressure switch.
4. Start engine and warm it up to normal operating temperature.
5. Check oil pressure with engine running under no-load, using Tool. Refer to
.
NOTE:
When engine oil temperature is low, engine oil pressure becomes high.
PBIC0249E
Tool numbers : ST25051001 (J-25695-1)
: ST25052000 (J-25695-2)
WBIA0571E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст