Nissan Altima L32. Instruction — part 1407
STR-24
< PREPARATION >
[QR25DE]
PREPARATION
PREPARATION
PREPARATION
Special Service Tool
INFOID:0000000004205240
Commercial Service Tool
INFOID:0000000004205241
Tool number (Kent Moore No.)
Tool name
Description
(J-48087)
Battery Service Center
Tests Battery.
For operating instructions, refer to Technical
Service Bulletin and Battery Service Center
User Guide.
(J-44373) Model 620
Starting/Charging system tester
Tests starting and charging systems.
For operating instructions, refer to Technical
Service Bulletin.
WKIA5280E
SEL403X
Tool name
Description
Power tool
Loosening bolts and nuts
PBIC0190E
STARTER MOTOR
STR-25
< ON-VEHICLE REPAIR >
[QR25DE]
C
D
E
F
G
H
I
J
K
L
M
A
STR
N
P
O
ON-VEHICLE REPAIR
STARTER MOTOR
Removal and Installation
INFOID:0000000004205242
M/T MODELS
Removal
1. Disconnect the negative battery terminal.
2. Disconnect the starter motor harness connectors.
3. Remove the two starter motor bolts, using power tools.
4. Remove the starter motor.
Installation
Installation is in the reverse order of removal.
Removal and Installation
INFOID:0000000004205243
CVT Models
REMOVAL
1. Remove the battery and battery tray bracket. For Sedan Refer to
PG-139, "Removal and Installation"
Coupe Refer to
PG-68, "Removal and Installation"
2. Remove the air cleaner assembly ducts.
3. Disconnect the following:
• ECM
• TCM
4. Disconnect the starter motor harness connectors.
5. Remove the two starter motor bolts, using power tools.
6. Remove the starter motor.
INSTALLATION
Installation is in the reverse order of removal.
Disassembly and Assembly
INFOID:0000000004507222
DISASSEMBLY
AWKIA1496GB
AWKIA1497GB
STR-26
< ON-VEHICLE REPAIR >
[QR25DE]
STARTER MOTOR
1. Set the starter motor assembly (2) onto a suitable tool using a
soft cloth as shown.
2. Remove the terminal "M" nut (A) from terminal "M" (1).
3. Disconnect terminal "M" connector (1).
4. Remove the two magnet switch assembly screws (A) and
remove the magnet switch assembly (1).
CAUTION:
Magnet switch assembly (1) may pop out from starter motor
assembly (2) while loosening magnet switch assembly
screws.
ASSEMBLY
1. Install magnet switch assembly (3) onto starter motor assembly
(1).
• Pull rod (5) of magnet switch assembly (3) should be engaged
with shift lever (4) as shown.
CAUTION:
• Do not damage the sliding surface (2) of magnet switch
assembly (3).
• Do not leave any dirt on the sliding surface (2) of the mag-
net switch assembly (3).
• Confirm the terminal location.
ALBIA0542ZZ
ALBIA0543ZZ
ALBIA0544ZZ
ALBIA0545ZZ
STARTER MOTOR
STR-27
< ON-VEHICLE REPAIR >
[QR25DE]
C
D
E
F
G
H
I
J
K
L
M
A
STR
N
P
O
2. Tighten the two magnet switch assembly screws (A) to specifi-
cation.
• Magnetic switch assembly (1)
• Starter motor assembly (2)
3. Connect the terminal "M" connector and tighten terminal "M" nut
(A) to specification.
• Starter motor assembly (2)
CAUTION:
The connector for terminal "M" (1) may rotate easily while
tightening terminal "M" nut (A). Hold the connector in place
while tightening terminal "M" nut (A).
Magnet switch assembly
screws (A)
: 5.9 N·m (0.6 kg-m, 8 lb-ft)
ALBIA0544ZZ
Terminal "M" nut (A)
: 10.8 N·m (1.1 kg-m, 15 ft-lb)
ALBIA0542ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст