Nissan Altima L32. Instruction — part 1159
ANTI-PINCH SYSTEM DOES NOT OPERATE NORMALLY (PASSENGER SIDE)
PWC-403
< SYMPTOM DIAGNOSIS >
[LH&RH FRONT ANTI-PINCH-SEDAN]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
ANTI-PINCH SYSTEM DOES NOT OPERATE NORMALLY (PASSENGER
SIDE)
Diagnosis Procedure
INFOID:0000000004205218
1.
PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure.
Refer to
PWC-295, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Require-
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK DOOR WINDOW SLIDING PART
• A foreign material adheres to window glass or glass run rubber.
• Glass run rubber wear or deformation.
• Sash is tilted too much or not enough.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK ENCODER CIRCUIT
Check encoder circuit.
PWC-322, "PASSENGER SIDE : Component Function Check"
Is the inspection result normal?
YES
>> Inspection end.
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
PWC-404
< SYMPTOM DIAGNOSIS >
[LH&RH FRONT ANTI-PINCH-SEDAN]
AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATES NORMAL-
LY (DRIVER SIDE)
AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATES
NORMALLY (DRIVER SIDE)
Diagnosis Procedure
INFOID:0000000004205219
1.
PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure.
Refer to
PWC-295, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Require-
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK ENCODER
Check encoder.
PWC-320, "DRIVER SIDE : Component Function Check"
.
Is the inspection result normal?
YES
>> Inspection end.
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATES NORMAL-
LY (PASSENGER SIDE)
PWC-405
< SYMPTOM DIAGNOSIS >
[LH&RH FRONT ANTI-PINCH-SEDAN]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATES
NORMALLY (PASSENGER SIDE)
Diagnosis Procedure
INFOID:0000000004205220
1.
PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure.
Refer to
PWC-295, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Require-
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK ENCODER
Check encoder.
PWC-322, "PASSENGER SIDE : Component Function Check"
Is the inspection result normal?
YES
>> Inspection end.
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
PWC-406
< SYMPTOM DIAGNOSIS >
[LH&RH FRONT ANTI-PINCH-SEDAN]
POWER WINDOW RETAINED POWER OPERATION DOES NOT OPERATE
PROPERLY
POWER WINDOW RETAINED POWER OPERATION DOES NOT OPER-
ATE PROPERLY
Diagnosis Procedure
INFOID:0000000004205221
1.
CHECK FRONT DOOR SWITCH
Check front door switch.
PWC-326, "Component Function Check"
.
Is the inspection result normal?
YES
>> Inspection end.
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст