Nissan Altima L32. Instruction — part 383
ON BOARD DIAGNOSTIC (OBD) SYSTEM
EC-653
< FUNCTION DIAGNOSIS >
[QR25DE EXCEPT FOR CALIFORNIA]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
Explanation for Driving Patterns Except for “Misfire <Exhaust Quality Deterioration>”, “Fuel Injection System”
*1: When the same malfunction is de-
tected in two consecutive trips, MIL
will light up.
*2: MIL will go off after vehicle is driven 3
times (pattern B) without any mal-
functions.
*3: When the same malfunction is de-
tected in two consecutive trips, the
DTC and the freeze frame data will be
stored in ECM.
*4: The DTC and the freeze frame data
will not be displayed any longer after
vehicle is driven 40 times (pattern A)
without the same malfunction.
(The DTC and the freeze frame data
still remain in ECM.)
*5: When a malfunction is detected for
the first time, the 1st trip DTC and the
1st trip freeze frame data will be
stored in ECM.
*6: 1st trip DTC will be cleared after vehi-
cle is driven once (pattern B) without
the same malfunction.
*7: When the same malfunction is de-
tected in the 2nd trip, the 1st trip
freeze frame data will be cleared.
SEF393SD
EC-654
< FUNCTION DIAGNOSIS >
[QR25DE EXCEPT FOR CALIFORNIA]
ON BOARD DIAGNOSTIC (OBD) SYSTEM
<Driving Pattern A>
• The A counter will be cleared when the malfunction is detected regardless of (1) - (4).
• The A counter will be counted up when (1) - (4) are satisfied without the same malfunction.
• The DTC will not be displayed after the A counter reaches 40.
<Driving Pattern B>
Driving pattern B means the vehicle operation as follows:
All components and systems should be monitored at least once by the OBD system.
• The B counter will be cleared when the malfunction is detected once regardless of the driving pattern.
• The B counter will be counted up when driving pattern B is satisfied without any malfunctions.
• The MIL will go off when the B counter reaches 3 (*2 in OBD SYSTEM OPERATION CHART).
CONSULT-III Function
INFOID:0000000004349634
FUNCTION
*: The following emission-related diagnostic information is cleared when the ECM memory is erased.
• Diagnostic trouble codes
• 1st trip diagnostic trouble codes
• Freeze frame data
• 1st trip freeze frame data
• System readiness test (SRT) codes
• Test values
ENGINE CONTROL COMPONENT PARTS/CONTROL SYSTEMS APPLICATION
AEC574
Diagnostic test mode
Function
Work support
This mode enables a technician to adjust some devices faster and more accurately by following the in-
dications on the CONSULT-III unit.
Self-diagnostic results
Self-diagnostic results such as 1st trip DTC, DTCs and 1st trip freeze frame data or freeze frame data
can be read and erased quickly.*
Data monitor
Input/Output data in the ECM can be read.
Active test
Diagnostic Test Mode in which CONSULT-III drives some actuators apart from the ECMs and also shifts
some parameters in a specified range.
DTC & SRT confirmation
The status of system monitoring tests and the self-diagnosis status/result can be confirmed.
Function test
This mode is used to inform customers when their vehicle condition requires periodic maintenance.
ECU part number
ECM part number can be read.
ON BOARD DIAGNOSTIC (OBD) SYSTEM
EC-655
< FUNCTION DIAGNOSIS >
[QR25DE EXCEPT FOR CALIFORNIA]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
Item
DIAGNOSTIC TEST MODE
WORK
SUPPORT
SELF-DIAGNOSTIC
RESULTS
DATA
MONI-
TOR
ACTIVE
TEST
DTC & SRT
CONFIRMATION
DTC*1
FREEZE
FRAME
DATA*2
SRT STA-
TUS
DTC
WORK
SUP-
PORT
E
N
GINE
CON
T
RO
L COMPONENT
P
ARTS
INPUT
Crankshaft position sensor (POS)
×
×
×
Camshaft position sensor (PHASE)
×
×
×
Mass air flow sensor
×
×
Engine coolant temperature sensor
×
×
×
×
Air fuel ratio (A/F) sensor 1
×
×
×
×
Heated oxygen sensor 2
×
×
×
×
Vehicle speed sensor
×
×
×
Accelerator pedal position sensor
×
×
Throttle position sensor
×
×
×
Fuel tank temperature sensor
×
×
×
EVAP control system pressure sensor
×
×
Intake air temperature sensor
×
×
×
Knock sensor
×
Refrigerant pressure sensor
×
Closed throttle position switch (accel-
erator pedal position sensor signal)
×
Air conditioner switch
×
Park/neutral position (PNP) switch
×
×
Stop lamp switch
×
×
Power steering pressure sensor
×
×
Battery voltage
×
Load signal
×
Primary speed sensor
×
×
Fuel level sensor
×
×
Battery current sensor
×
×
ASCD steering switch
×
×
ASCD brake switch
×
×
EC-656
< FUNCTION DIAGNOSIS >
[QR25DE EXCEPT FOR CALIFORNIA]
ON BOARD DIAGNOSTIC (OBD) SYSTEM
X: Applicable
*1: This item includes 1st trip DTCs.
*2: This mode includes 1st trip freeze frame data or freeze frame data. The items appear on CONSULT-III screen in freeze frame data
mode only if a 1st trip DTC or DTC is detected. For details, refer to
EC-641, "Diagnosis Description"
.
*3: Always “CMPLT” is displayed.
WORK SUPPORT MODE
Work Item
ENGINE CONTROL COMPON
E
N
T P
A
R
T
S
OU
T
P
U
T
Fuel injector
×
×
Power transistor (Ignition timing)
×
×
Throttle control motor relay
×
×
Throttle control motor
×
EVAP canister purge volume control
solenoid valve
×
×
×
×
Air conditioner relay
×
Fuel pump relay
×
×
×
Cooling fan relay
×
×
×
Air fuel ratio (A/F) sensor 1 heater
×
×
×*
3
Heated oxygen sensor 2 heater
×
×
×*
3
EVAP canister vent control valve
×
×
×
×
Intake valve timing control solenoid
valve
×
×
×
Alternator
×
×
Calculated load value
×
×
Item
DIAGNOSTIC TEST MODE
WORK
SUPPORT
SELF-DIAGNOSTIC
RESULTS
DATA
MONI-
TOR
ACTIVE
TEST
DTC & SRT
CONFIRMATION
DTC*1
FREEZE
FRAME
DATA*2
SRT STA-
TUS
DTC
WORK
SUP-
PORT
WORK ITEM
CONDITION
USAGE
FUEL PRESSURE RELEASE
• FUEL PUMP WILL STOP BY TOUCHING “START” DUR-
ING IDLING.
CRANK A FEW TIMES AFTER ENGINE STALLS.
When releasing fuel pressure from
fuel line
IDLE AIR VOL LEARN
• THE IDLE AIR VOLUME THAT KEEPS THE ENGINE
WITHIN THE SPECIFIED RANGE IS MEMORIZED IN
ECM.
When learning the idle air volume
SELF-LEARNING CONT
• THE COEFFICIENT OF SELF-LEARNING CONTROL
MIXTURE RATIO RETURNS TO THE ORIGINAL COEF-
FICIENT.
When clearing mixture ratio self-
learning value
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст