Nissan Altima L32. Instruction — part 1196
FRONT SEAT BELT
SB-9
< ON-VEHICLE REPAIR >
C
D
E
F
G
I
J
K
L
M
A
B
SB
N
O
P
6. Disconnect seat belt pre-tensioner connector (1).
⇐: Vehicle front
CAUTION:
• For installing/removing seat belt pre-tensioner connector,
insert a thin screwdriver wrapped with tape into the
notch; lift locking tab then remove connector.
• Install connector with lock raised, then push locking tab
into connector.
7. Remove seat belt retractor screw (A) and retractor anchor bolt
(B), then remove seat belt retractor (2) from center pillar.
INSTALLATION OF SEAT BELT RETRACTOR - COUPE
Installation is in the reverse order of removal.
• Always perform an inspection after repair to be sure the system is functioning within specifications. Refer to
.
REMOVAL OF SEAT BELT RETRACTOR - SEDAN
CAUTION:
Before servicing SRS, turn the ignition switch off, disconnect both negative and positive battery termi-
nals, then wait at least three minutes.
1. Disconnect both negative and positive battery terminals, then wait at least three minutes.
2. Release the pawl, then remove outer anchor bolt cover and outer anchor bolt.
3. Remove center pillar lower and upper finishers. Refer to
INT-36, "Removal and Installation"
.
4. Remove D-ring anchor bolt from seat belt adjuster.
5. Remove seat belt retractor.
• Disconnect the seat belt pre-tensioner connector.
CAUTION:
• For installing/removing seat belt pre-tensioner connec-
tor, insert a thin screwdriver wrapped with tape into the
notch; lift locking tab then remove connector.
• Install connector with lock raised, then push locking tab
into connector.
• Remove screw and retractor anchor bolt, then remove seat belt retractor from center pillar.
6. Remove bolts, then remove seat belt adjuster from center pillar.
INSTALLATION OF SEAT BELT RETRACTOR- SEDAN
Installation is in the reverse order of removal.
• Always perform an inspection after repair to be sure the system is functioning within specifications. Refer to
.
REMOVAL OF SEAT BELT BUCKLE
CAUTION:
Before servicing SRS, turn the ignition switch off, disconnect both negative and positive battery termi-
nals, then wait at least three minutes.
1. Disconnect the negative and positive battery terminals, then wait at least three minutes.
2. Remove the front seat from the vehicle. Refer to
SE-23, "Removal and Installation"
ALHIA0074GB
PHIA0953J
SB-10
< ON-VEHICLE REPAIR >
FRONT SEAT BELT
3. Remove anchor nut (A) from the seat belt buckle (1).
4. Disconnect the seat belt buckle harness connector (2), release
the harness clip(s), then remove the seat belt buckle (1).
INSTALLATION OF SEAT BELT BUCKLE
Installation is in the reverse order of removal.
• Always perform an inspection after repair to be sure the system is functioning within specifications. Refer to
.
ALHIA0008GB
REAR SEAT BELT
SB-11
< ON-VEHICLE REPAIR >
C
D
E
F
G
I
J
K
L
M
A
B
SB
N
O
P
REAR SEAT BELT
Exploded View
INFOID:0000000004205518
Sedan Models
AWHIA0196GB
1.
Seat belt retractor RH
2.
Seat belt buckle RH
3.
Seat belt buckle center
4.
Seat belt buckle LH
5.
Seat belt retractor center
6.
Seat belt retractor LH
A.
Retractor anchor bolt
B.
Outer anchor bolt
C.
Buckle anchor bolt
SB-12
< ON-VEHICLE REPAIR >
REAR SEAT BELT
Coupe Models
Removal and Installation
INFOID:0000000004205519
REMOVAL OF SEAT BELT RETRACTOR (SEDAN)
1. Remove the rear seat cushion. Refer to
SE-53, "Removal and Installation"
2. Remove the outer anchor bolt.
3. Remove the rear parcel shelf finisher. Refer to
INT-38, "Removal and Installation"
.
4. Remove retractor anchor bolt, then remove seat belt retractor.
INSTALLATION OF SEAT BELT RETRACTOR (SEDAN)
Installation is in the reverse order of removal.
• Always perform an inspection after repair to be sure the system in functioning within specifications. Refer to
.
REMOVAL OF SEAT BELT RETRACTOR (COUPE OUTER)
1. Remove the rear seat cushion and seat back. Refer to
SE-25, "Removal and Installation"
2. Remove upper pillar finisher and rear lower finisher. Refer to
INT-15, "Removal and Installation"
ALHIA0073GB
1.
Seat belt retractor outer RH
2.
Seat belt buckle
3.
Seat belt retractor center
4.
Seat belt retractor outer LH
A.
Retractor anchor bolt
B.
Retractor screw
C.
D-ring anchor bolt
D.
Anchor bolt
E.
Retractor anchor bolt center
⇐
Vehicle front
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст