Nissan Altima L32. Instruction — part 1147
FRONT POWER WINDOW SWITCH
PWC-355
< ECU DIAGNOSIS >
[LH&RH FRONT ANTI-PINCH-SEDAN]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
ABKIA0665GB
PWC-356
< ECU DIAGNOSIS >
[LH&RH FRONT ANTI-PINCH-SEDAN]
FRONT POWER WINDOW SWITCH
Fail Safe
INFOID:0000000004498326
FAIL-SAFE CONTROL
Switches to fail-safe control when malfunction is detected in encoder signal that detects up/down speed and
direction of door glass. Switches to fail-safe control when error beyond regulation value is detected between
the fully closed position and the actual position of the glass.
ABKIA0666GB
FRONT POWER WINDOW SWITCH
PWC-357
< ECU DIAGNOSIS >
[LH&RH FRONT ANTI-PINCH-SEDAN]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
It changes to condition before initialization and the following functions do not operate when switched to fail-
safe control.
• Auto-up operation
• Anti-pinch function
• Retained power function
Perform initial operation to recover when switched to fail-safe mode. However, it switches back to fail-safe
control when malfunction is found in power window switch or in motor.
Error
Error condition
Pulse sensor malfunction
When only one side of pulse signal is being detected for more than the specified value.
Both pulse sensors mal-
function
When both pulse signals have not been detected for more than the specified value during glass open/
close operation.
Pulse direction malfunction
When the pulse signal that is detected during glass open/close operation detects the opposite condition
of power window motor operating direction.
Glass recognition position
malfunction 1
When it detects the error between glass fully closed position in power window switch memory and actual
fully closed position during glass open/close operation is more than the specified value.
Glass recognition position
malfunction 2
When it detects pulse count more than the value of glass full stroke during glass open/close operation.
Malfunction of not yet up-
dated closed position of
glass
When glass open/close operation is continuously performed without fully closing more than the specified
value (approximately 10 strokes).
PWC-358
< ECU DIAGNOSIS >
[LH&RH FRONT ANTI-PINCH-SEDAN]
BCM (BODY CONTROL MODULE)
BCM (BODY CONTROL MODULE)
Reference Value
INFOID:0000000004498299
VALUES ON THE DIAGNOSIS TOOL
Monitor Item
Condition
Value/Status
FR WIPER HI
Other than front wiper switch HI
OFF
Front wiper switch HI
ON
FR WIPER LOW
Other than front wiper switch LO
OFF
Front wiper switch LO
ON
FR WASHER SW
Front washer switch OFF
OFF
Front washer switch ON
ON
FR WIPER INT
Other than front wiper switch INT
OFF
Front wiper switch INT
ON
FR WIPER STOP
Front wiper is not in STOP position
OFF
Front wiper is in STOP position
ON
INT VOLUME
Wiper intermittent dial is in a dial position 1 - 7
Wiper intermittent dial position
TURN SIGNAL R
Other than turn signal switch RH
OFF
Turn signal switch RH
ON
TURN SIGNAL L
Other than turn signal switch LH
OFF
Turn signal switch LH
ON
TAIL LAMP SW
Other than lighting switch 1ST and 2ND
OFF
Lighting switch 1ST or 2ND
ON
HI BEAM SW
Other than lighting switch HI
OFF
Lighting switch HI
ON
HEAD LAMP SW 1
Other than lighting switch 2ND
OFF
Lighting switch 2ND
ON
HEAD LAMP SW 2
Other than lighting switch 2ND
OFF
Lighting switch 2ND
ON
PASSING SW
Other than lighting switch PASS
OFF
Lighting switch PASS
ON
AUTO LIGHT SW
Other than lighting switch AUTO
OFF
Lighting switch AUTO
ON
FR FOG SW
Front fog lamp switch OFF
OFF
Front fog lamp switch ON
ON
DOOR SW-DR
Driver door closed
OFF
Driver door opened
ON
DOOR SW-AS
Passenger door closed
OFF
Passenger door opened
ON
DOOR SW-RR
Rear door RH closed
OFF
Rear door RH opened
ON
DOOR SW-RL
Rear door LH closed
OFF
Rear door LH opened
ON
DOOR SW-BK
NOTE:
This item is displayed, but cannot be monitored.
OFF
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст