Nissan Pathfinder (2012 year). Instruction — part 529
VEHICLE SECURITY SYSTEM
SEC-21
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
Component Description
INFOID:0000000007355679
Item
Function
BCM
Controls the door lock function and room lamp function.
Door switch
Provides the BCM with the status of each monitored door.
Security indicator
Indicates the status of the security system.
IPDM E/R
Controls the horn and headlamp operation.
Horn
Sounds when the vehicle security system is triggered.
August 2012
2012 Pathfinder
2012 Pathfinder
SEC-22
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
INFOID:0000000007818227
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions.
Direct Diagnostic Mode
Description
Ecu Identification
The BCM part number is displayed.
Self Diagnostic Result
The BCM self diagnostic results are displayed.
Data Monitor
The BCM input/output data is displayed in real time.
Active Test
The BCM activates outputs to test components.
Work support
The settings for BCM functions can be changed.
Configuration
• The vehicle specification can be read and saved.
• The vehicle specification can be written when replacing BCM.
CAN Diag Support Mntr
The result of transmit/receive diagnosis of CAN communication is displayed.
System
Sub System
Direct Diagnostic Mode
E
cu
Id
en
tifi
ca
tio
n
Se
lf Di
ag
no
st
ic Re
su
lt
Da
ta
Mo
ni
tor
A
cti
ve
T
est
W
o
rk support
Co
nf
igu
rat
ion
CA
N Diag
Su
pp
ort Mn
tr
Door lock
DOOR LOCK
×
×
×
Rear window defogger
REAR DEFOGGER
×
×
Warning chime
BUZZER
×
×
Interior room lamp timer
INT LAMP
×
×
×
Remote keyless entry system
MULTI REMOTE ENT
×
×
×
Exterior lamp
HEAD LAMP
×
×
×
Wiper and washer
WIPER
×
×
×
Turn signal and hazard warning lamps FLASHER
×
×
Air conditioner
AIR CONDITIONER
×
Intelligent Key system
INTELLIGENT KEY
×
Combination switch
COMB SW
×
BCM
BCM
×
×
×
×
×
Immobilizer
IMMU
×
×
×
Interior room lamp battery saver
BATTERY SAVER
×
×
×
Back door open
TRUNK
×
×
Vehicle security system
THEFT ALM
×
×
×
RAP system
RETAINED PWR
×
×
×
Signal buffer system
SIGNAL BUFFER
×
×
TPMS
AIR PRESSURE MONITOR
×
×
×
×
Panic alarm system
PANIC ALARM
×
August 2012
2012 Pathfinder
2012 Pathfinder
DIAGNOSIS SYSTEM (BCM)
SEC-23
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
IMMU
IMMU : CONSULT Function (BCM - IMMU)
INFOID:0000000007818228
SELF DIAGNOSTIC RESULT
DATA MONITOR
ACTIVE TEST
THEFT ALM
THEFT ALM : CONSULT Function (BCM - THEFT ALM)
INFOID:0000000007818229
DATA MONITOR
* : with Intelligent Key
** : without Intelligent Key
ACTIVE TEST
WORK SUPPORT
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
Test Item
Description
THEFT IND
This test is able to check security indicator operation [Off/On].
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
ACC ON SW [On/Off]
Indicates condition of ignition switch ACC position.
I-KEY LOCK* [On/Off]
Indicates condition of lock signal from Intelligent Key.
I-KEY UNLOCK* [On/Off]
Indicates condition of unlock signal from Intelligent Key.
KEYLESS LOCK** [On/Off]
Indicates condition of lock signal from keyfob.
KEYLESS UNLOCK** [On/Off]
Indicates condition of unlock signal from keyfob.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
BACK DOOR SW [On/Off]
Indicates condition of back door switch.
KEY CYL LK-SW [On/Off]
Indicates condition of lock signal from door key cylinder switch.
KEY CYL UN-SW [On/Off]
Indicates condition of unlock signal from door key cylinder switch.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]
Indicates condition of unlock signal from door lock and unlock switch.
Test Item
Description
THEFT IND
This test is able to check security indicator lamp operation [Off/On].
VEHICLE SECURITY HORN
This test is able to check vehicle security horn operation [On].
HEADLAMP(HI)
This test is able to check vehicle security lamp operation [On].
August 2012
2012 Pathfinder
2012 Pathfinder
SEC-24
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
*: Initial setting
Support Item
Setting
Description
SECURITY ALARM SET
Off
Security alarm OFF.
On*
Security alarm ON.
THEFT ALM TRG
Off/On
The switch which triggered vehicle security alarm is recorded.
August 2012
2012 Pathfinder
2012 Pathfinder
DIAGNOSIS SYSTEM (INTELLIGENT KEY UNIT)
SEC-25
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
DIAGNOSIS SYSTEM (INTELLIGENT KEY UNIT)
CONSULT Function (INTELLIGENT KEY)
INFOID:0000000007818260
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with Intelligent Key unit.
SELF-DIAG RESULT
DATA MONITOR
ACTIVE TEST
Diagnosis mode
Function Description
ECU IDENTIFICATION
The Intelligent Key unit part number is displayed.
SELF DIAGNOSTIC RESULT
Displays the diagnosis results judged by Intelligent Key unit.
DATA MONITOR
The Intelligent Key unit input/output signals are displayed.
ACTIVE TEST
The signals used to activate each device are forcibly supplied from Intelligent Key unit.
WORK SUPPORT
Changes the setting for each system function.
CAN DIAG SUPPORT MNTR
Monitors the reception status of CAN communication viewed from Intelligent Key unit.
Monitor Item
Condition
PUSH SW
Indicates [ON (pushed)/OFF (released)] condition of ignition knob switch.
KEY SW
Indicates [ON (inserted)/OFF (removed)] condition of key switch.
DR REQ SW
Indicates [ON (pressed)/OFF (released)] condition of door request switch (driver side).
AS REQ SW
Indicates [ON (pressed)/OFF (released)] condition of door request switch (passenger
side).
BD/TR REQ SW
Indicates [ON (pressed)/OFF (released)] condition of back door request switch.
IGN SW
Indicates [ON (ON or START position)/OFF (other than ON and START position)] con-
dition of ignition switch ON position.
ACC SW
Indicates [ON/OFF] condition of ignition switch ACC position.
STOP LAMP SW
Indicates [ON/OFF] condition of stop lamp switch.
P RANGE SW
Indicates [ON/OFF] position of shift lever park position switch.
BD OPEN SW
Indicates [ON (pressed)/OFF (released)] condition of back door opener switch.
DOOR LOCK SIG
Indicates [ON/OFF] condition of LOCK signal from Intelligent Key.
DOOR UNLOCK SIG
Indicates [ON/OFF] condition of UNLOCK signal from Intelligent Key.
KEYLESS PANIC
Indicates [ON (pressed)/OFF (released)] condition of Intelligent Key panic button.
KEYLS PBD SIG
Indicates [ON (pressed)/OFF (released)] condition of Intelligent Key back door button.
DOOR SW DR
Indicates [OPEN/CLOSE] condition of front door switch (driver side) from BCM via CAN
communication.
DOOR SW AS
Indicates [OPEN/CLOSE] condition of front door switch (passenger side) from BCM via
CAN communication.
DOOR SW RR
Indicates [OPEN/CLOSE] condition of rear door switch (RH) from BCM via CAN com-
munication.
DOOR SW RL
Indicates [OPEN/CLOSE] condition of rear door switch (LH) from BCM via CAN com-
munication.
DOOR BK SW
Indicates [OPEN/CLOSE] condition of back door switch from BCM via CAN communi-
cation.
VEHICLE SPEED
Displays the vehicle speed signal received from combination meter by numerical value
[km/h].
August 2012
2012 Pathfinder
2012 Pathfinder
SEC-26
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (INTELLIGENT KEY UNIT)
WORK SUPPORT
Test item
Description
DOOR LOCK/UNLOCK
This test is able to check door lock/unlock operation.
• ALL UNLK: All door lock actuators are unlocked.
• DR UNLK: Door lock actuator (driver side) is unlocked.
• AS UNLK: Door lock actuator (passenger side) is unlocked.
• BK UNLK: This item is indicated, but inactive.
• LOCK: All door lock actuator is locked.
ANTENNA
This test is able to check Intelligent Key antenna operation.
When the following condition are met, hazard warning lamps flash.
• ROOM ANT1: Instrument panel area antenna detects Intelligent Key when “ROOM ANT1” is selected.
• ROOM ANT2: Center console and luggage area antennas detect Intelligent Key when “ROOM ANT2”is
selected.
• LUG ANT: This selection is not used.
• DRIVER ANT: Outside key antenna (driver side) detects Intelligent Key when “DR ANT” is selected.
• ASSIST ANT: Outside key antenna (passenger side) detects Intelligent Key when “AS ANT” is selected.
• BK DOOR ANT: Outside key antenna (rear bumper) detects Intelligent Key when “BK DR ANT” is selected.
OUTSIDE BUZZER
This test is able to check Intelligent Key warning buzzer operation.
• ON
• OFF
INSIDE BUZZER
This test is able to check warning chime in combination meter operation.
• TAKE OUT: Take away warning chime sounds.
• KNOB: Ignition knob switch warning chime sounds.
• KEY: Key warning chime sounds.
• OFF
INDICATOR
This test is able to check Intelligent Key warning lamps operation.
• Green "KEY" warning lamp illuminates when "BLUE ON" on CONSULT screen is touched.
• Red "KEY" warning lamp illuminates when "RED ON" on CONSULT screen is touched.
• Shift to park warning lamp illuminates when "KNOB ON" on CONSULT screen is touched.
• Green "KEY" warning lamp flashes when "BLUE IND" on CONSULT screen is touched.
• Red "KEY" warning lamp flashes when "RED IND" on CONSULT screen is touched.
• Shift to park warning lamp (P-SHIFT) flashes when "KNOB IND" on CONSULT screen is touched.
• OFF
Support item
Description
Selection item
Condition
CONFIRM KEY FOB ID
It can check whether Intelligent Key ID code is
registered or not.
—
—
TAKE OUT FROM WINDOW WARN
Take away warning chime (from window) mode
can be changed.
ON
Active
OFF
Inactive
LOW BATT OF KEY FOB WARN
Intelligent Key low battery warning mode can be
changed.
ON
Active
SELECTIVE UNLOCK FUNCTION
Anti-hijack mode can be changed.
ON
Active
OFF
Inactive
HAZARD ANSWER BACK
Hazard reminder operation mode can be
changed.
LOCK/UNLOCK
Active
LOCK ONLY
UNLOCK ONLY
OFF
Inactive
ANSWER BACK WITH I-KEY LOCK
Buzzer reminder operation (lock operation)
mode by each door request switch can be
changed.
HORN CHIRP
Active
BUZZER
OFF
Inactive
ANSWER BACK WITH I-KEY UNLOCK
Buzzer reminder operation (unlock operation)
mode by each door request switch can be
changed.
ON
Active
OFF
Inactive
August 2012
2012 Pathfinder
2012 Pathfinder
DIAGNOSIS SYSTEM (INTELLIGENT KEY UNIT)
SEC-27
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
AUTO RELOCK TIMER
Auto door lock operation mode can be
changed.
1 min
Active
5 min
OFF
Inactive
PANIC ALARM DELAY
Panic alarm button pressing time on Intelligent
Key button can be selected from the following
with this mode.
0.5 sec
Active
1.5 sec
OFF
Inactive
ENGINE START BY I-KEY
Engine start function (by Intelligent Key) mode
can be changed.
ON
Active
OFF
Inactive
LOCK/UNLOCK BY I-KEY
Door lock function by door request switch can
be changed.
ON
Active
OFF
Inactive
Support item
Description
Selection item
Condition
August 2012
2012 Pathfinder
2012 Pathfinder
SEC-28
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
U1000 CAN COMM CIRCUIT
DTC/CIRCUIT DIAGNOSIS
U1000 CAN COMM CIRCUIT
Description
INFOID:0000000007355684
CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Modern
vehicle is equipped with many electronic control unit, and each control unit shares information and links with
other control units during operation (not independent). In CAN communication, control units are connected
with 2 communication lines (CAN-H line, CAN-L line) allowing a high rate of information transmission with less
wiring. Each control unit transmits/receives data but selectively reads required data only.
CAN Communication Signal Chart, refer to
LAN-53, "CAN Communication Signal Chart"
DTC Logic
INFOID:0000000007355685
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000007355686
1.
PERFORM SELF DIAGNOSTIC
1. Turn ignition switch ON and wait for 2 seconds or more.
2. Check “Self Diagnostic Result”.
Is “CAN COMM CIRCUIT” displayed?
YES
>> Refer to
LAN-5, "CAN Communication Control Circuit"
.
NO
>> Refer to
GI-37, "Intermittent Incident"
.
DTC
CONSULT display de-
scription
DTC Detection Condition
Possible cause
U1000
CAN COMM CIRCUIT
When Intelligent Key unit cannot communi-
cate CAN communication signal continuous-
ly for 2 seconds or more.
In CAN communication system, any item (or items)
of the following listed below is malfunctioning.
• Transmission
• Receiving (BCM)
• Receiving (ECM)
• Receiving (METER/M&A)
August 2012
2012 Pathfinder
2012 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст