Nissan Pathfinder (2012 year). Instruction — part 163
DOOR
DLK-199
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
4. Remove the door-side hinge nuts, and the door assembly.
Installation
Installation is in the reverse order of removal.
Align the front door. Refer to
.
REAR DOOR
Removal
1. Remove the door finisher. Refer to
INT-15, "Removal and Installation"
.
2. Remove the inner seal.
3. Remove the rear door speaker. Refer to
AV-38, "Removal and Installation"
AV-260, "Removal and Installation of Rear Door Speaker"
(BOSE AUDIO WITHOUT NAVIGATION) or
AV-425, "Removal and Installation of Rear Door Speaker"
(BOSE AUDIO WITH NAVIGATION).
4. Remove the rear door tweeter. Refer to
AV-426, "Removal and Installation of Rear Tweeter"
AUDIO WITH NAVIGATION).
5. Remove the rear door glass and regulator. Refer to
GW-19, "Rear Door Glass Regulator"
.
6. Remove the door harness.
7. Remove the check link bolt from the hinge pillar.
8. Remove the door-side hinge nuts, and remove the door assem-
bly.
Installation
Installation is in the reverse order of removal.
Align the rear door. Refer to
BACK DOOR
Removal
Door hinge nuts
24.5 N·m (2.5 kg-m, 18 ft-lb)
LIIA1727E
Check link to hinge pillar
bolt
14.7 N·m (1.5kg-m, 11ft-lb)
LIIA1726E
Door hinge nuts
25.8N·m (2.6Kg-m, 19 ft-lb)
LIIA1727E
August 2012
2012 Pathfinder
2012 Pathfinder
DLK-200
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
DOOR
1. Remove the glass hatch. Refer to
GW-24, "Removal and Installation"
.
2. Remove the license lamp finisher. Refer to
EXT-23, "Removal and Installation"
.
3. Remove the back door lock assembly. Refer to
DLK-206, "Component Structure"
4. Remove the back door wire harness.
5. Remove the rear wiper motor. Refer to
WW-75, "Removal and Installation"
6. Remove the rear washer nozzle and hose from the back door. Refer to
7. Remove the high mounted stop lamp. Refer to
EXL-151, "High-Mounted Stop Lamp"
8. Support the back door.
9. Remove the back door stays.
10. Remove the door side nuts and the back door assembly.
CAUTION:
Two technicians should be used to avoid damaging the back door during removal.
Installation
Installation is in the reverse order of removal.
Align the back door. Refer to
.
Back Door Stay Disposal
INFOID:0000000007355543
1. Fix back door stay (1) using a vise (C).
2. Using hacksaw (A) slowly make 2 holes in the back door stay, in
numerical order as shown in the figure.
CAUTION:
• When cutting a hole on back door stay, always cover a
hacksaw using a shop cloth (B) to avoid scattering metal
fragments or oil.
• Wear eye protection (safety glasses).
• Wear gloves.
WIIA1056E
JMKIA3336ZZ
August 2012
2012 Pathfinder
2012 Pathfinder
DOOR
DLK-201
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
A: 20 mm (0.787 in)
B: Cut at the groove.
JMKIA3609ZZ
August 2012
2012 Pathfinder
2012 Pathfinder
DLK-202
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
FRONT DOOR LOCK
FRONT DOOR LOCK
Component Structure
INFOID:0000000007355544
Removal and Installation
INFOID:0000000007355545
REMOVAL
1. Remove the front door window regulator. Refer to
GW-15, "Front Door Glass Regulator"
2. Remove door side grommet, and remove door key cylinder assembly (driver side) or outside handle
escutcheon (passenger side) bolts (1) (T30) from grommet hole.
• (2) Weatherstrip
1.
Grommet
2.
Front door striker
3.
Door lock assembly
4.
Outside handle cable
5.
Inside handle assembly
6.
Inside handle cable
7.
Door lock cable
8.
Key cylinder rod (Driver side only)
9.
Door key cylinder
10. Outside handle bracket
11. Front gasket
12. Outside handle
13. Door key cylinder assembly (Driver
side) Outside handle escutcheon
(Passenger side)
14. Rear gasket
Vehicle front
AWKIA1793GB
AWKIA2017ZZ
August 2012
2012 Pathfinder
2012 Pathfinder
FRONT DOOR LOCK
DLK-203
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3. While pulling the outside handle (1), remove door key cylinder
assembly or escutcheon (2).
4. Separate the door key cylinder rod from the door key cylinder assembly (if equipped).
5. Disconnect the intelligent key harness connectors.
6. While pulling outside handle (1), slide toward rear of vehicle (2)
to remove outside handle.
7. Remove the front gasket (1) and rear gasket (2).
8. Remove the door lock bolts (T30), remove the door lock assem-
bly.
CAUTION:
Do not reuse door lock bolts.
ALKIA0922ZZ
ALKIA0923ZZ
ALKIA0924ZZ
AWKIA2018ZZ
August 2012
2012 Pathfinder
2012 Pathfinder
DLK-204
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
FRONT DOOR LOCK
9. While pulling outside handle bracket, slide toward rear of vehicle
to remove outside handle bracket and door lock assembly as
shown.
10. Disconnect the door lock actuator harness connector.
11. Separate the outside handle cable connection from the outside
handle bracket.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• To install the key cylinder rod, be sure to rotate the key cylinder rod holder until a click is felt.
• Do not twist the door lock cable when installing the front door lock.
Disassembly and Assembly
INFOID:0000000007355546
DOOR KEY CYLINDER ASSEMBLY
Release the key cylinder escutcheon pawls to remove the door key cylinder.
PIIA3558E
PIIA5059E
1.
Door key cylinder assembly
2.
Door key cylinder escutcheon
3.
Door key cylinder
Pawl
WIIA1057E
August 2012
2012 Pathfinder
2012 Pathfinder
REAR DOOR LOCK
DLK-205
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REAR DOOR LOCK
Component Structure
INFOID:0000000007355547
Removal and Installation
INFOID:0000000007355548
REMOVAL
1. Remove the rear door finisher Refer to
INT-15, "Removal and Installation"
2. Remove door grommets, and remove outside handle nuts from the hole.
3. Remove the inner seal.
4. Remove outside handle.
5. Disconnect the outside handle cable connection.
6. Remove the inside door handle.
7. Disconnect the door lock and inside door handle cables from the inside door handle.
8. Disconnect the door lock actuator connector and remove the assembly.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not twist the outside door handle cable, inside door handle cable and door lock cable during instal-
lation.
1.
Outside door handle
2.
Rear door striker
3.
Rear door lock assembly
4.
Outside door handle cable
5.
Inside door handle cable
6.
Inside door handle assembly
7.
Door lock cable
Vehicle front
AWKIA1794GB
August 2012
2012 Pathfinder
2012 Pathfinder
DLK-206
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
BACK DOOR LOCK
BACK DOOR LOCK
Component Structure
INFOID:0000000007355549
1.
Glass hatch latch assembly
2.
Back door control assembly
3.
Back door striker
4.
Back door latch assembly
5.
Back door release button
6.
Back door finisher
7.
Key button
8.
Glass hatch release handle
9.
Glass hatch release cable
Vehicle front
AWKIA1438GB
August 2012
2012 Pathfinder
2012 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст