Nissan Pathfinder (2012 year). Instruction — part 610
EVAPORATOR
VTL-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
REMOVAL
1. Remove the rear heater and cooling unit assembly from the vehicle. Refer to
.
2. Remove the rear blower motor.
3. Remove the variable blower control (rear).
4. Remove the rear air mix door motor.
5. Remove the rear duct and blend door assembly. Refer to
34, "Removal and Installation"
6. Disassemble the rear heater and cooling unit assembly to
remove the rear evaporator.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-rings.
• Apply A/C oil to the O-rings on the rear high- and low-pressure A/C pipes for installation.
• After charging refrigerant, check for leaks.
WJIA1134E
August 2012
2012 Pathfinder
VTL-24
< REMOVAL AND INSTALLATION >
EXPANSION VALVE
EXPANSION VALVE
Removal and Installation for Rear Expansion Valve
INFOID:0000000007356282
REMOVAL
1. Discharge the refrigerant. Refer to
HA-36, "HFC-134a (R-134a) Service Procedure"
.
2. Reposition the third row seat out of the way.
3. Remove the luggage side lower finisher RH access door.
4. Disconnect the rear high- and low-pressure A/C pipes from the rear expansion valve.
CAUTION:
Cap or wrap the A/C refrigerant pipe ends with a suitable material such as vinyl tape to avoid the
entry of air and contaminants.
5. Remove the expansion valve.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-rings.
• Apply A/C oil to the O-rings on the rear expansion valve and the rear high- and low-pressure A/C
pipes for installation.
• After charging refrigerant, check for leaks.
Expansion valve bolts
: Refer to
A/C refrigerant pipe to expansion valve bolt
: Refer to
August 2012
2012 Pathfinder
HEATER CORE
VTL-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
HEATER CORE
Component
INFOID:0000000007356283
Front Heater and Cooling Unit Assembly
Rear Heater and Cooling Unit Assembly
AWIIA1478ZZ
1.
Front heater core and evaporator pipe
bracket
2.
Front heater core
3.
Front heater and cooling unit assembly
4.
Front heater core cover
LJIA0168E
1.
Rear heater and cooling unit assembly
2.
Rear blower motor
3.
Rear heater core bracket
4.
Rear heater core
August 2012
2012 Pathfinder
VTL-26
< REMOVAL AND INSTALLATION >
HEATER CORE
Removal and Installation
INFOID:0000000007356284
FRONT HEATER CORE
Removal
1. Remove the front heater and cooling unit assembly. Refer to
VTL-18, "Removal and Installation"
.
2. Remove the screws and the front heater core cover.
3. Remove the front heater core and evaporator pipe bracket.
4. Remove the front heater core.
NOTE:
If the in-cabin microfilters are contaminated from coolant leaking from the front heater core, replace the in-
cabin microfilters with new ones before installing the new front heater core.
Installation
Installation is in the reverse order of removal.
REAR HEATER CORE
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spill-
ing.
Removal
1. Partially drain the engine cooling system. Refer to
CO-12, "Changing Engine Coolant"
(VK56DE).
2. Remove the rear heater and cooling unit assembly. Refer to
VTL-18, "Removal and Installation"
3. Remove the rear heater core bracket.
4. Remove the heater core.
Installation
Installation is in the reverse order of removal.
August 2012
2012 Pathfinder
INTAKE DOOR MOTOR
VTL-27
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
INTAKE DOOR MOTOR
Removal and Installation
INFOID:0000000007356285
Intake Door Motor - Front Heater and Cooling Unit Assembly
REMOVAL
1. Remove the front heater and cooling unit assembly. Refer to
VTL-18, "Removal and Installation"
.
2. Remove the steering member from the front heater and cooling unit assembly.
3. Disconnect the intake door motor electrical connector.
4. Remove the 3 screws and the intake door motor.
INSTALLATION
Installation is in the reverse order of removal.
LBIA0415E
1.
Front heater and cooling unit assembly
2.
Intake door motor
3.
Air mix door motor (passenger)
4.
Variable blower control (front)
5.
Air mix door motor (driver)
6.
Mode door motor
August 2012
2012 Pathfinder
VTL-28
< REMOVAL AND INSTALLATION >
MODE DOOR MOTOR
MODE DOOR MOTOR
Removal and Installation
INFOID:0000000007356286
Mode Door Motor - Front Heater and Cooling Unit Assembly
REMOVAL
1. Remove the BCM. Refer to
BCS-53, "Removal and Installation"
.
2. Disconnect the mode door motor electrical connector.
3. Remove the 3 screws and the mode door motor.
INSTALLATION
Installation is in the reverse order of removal.
LBIA0415E
1.
Front heater and cooling unit assembly
2.
Intake door motor
3.
Air mix door motor (passenger)
4.
Variable blower control (front)
5.
Air mix door motor (driver)
6.
Mode door motor
August 2012
2012 Pathfinder
AIR MIX DOOR MOTOR
VTL-29
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
AIR MIX DOOR MOTOR
Component
INFOID:0000000007356287
Air Mix Door Motors - ATC - Front Heater and Cooling Unit Assembly
LBIA0415E
1.
Front heater and cooling unit assembly
2.
Intake door motor
3.
Air mix door motor (passenger)
4.
Variable blower control (front)
5.
Air mix door motor (driver)
6.
Mode door motor
August 2012
2012 Pathfinder
VTL-30
< REMOVAL AND INSTALLATION >
AIR MIX DOOR MOTOR
Air Mix Door Motor - MTC - Heater and Cooling Unit Assembly
Removal and Installation
INFOID:0000000007356288
FRONT AIR MIX DOOR MOTOR - DRIVER - ATC
Removal
1. Remove the lower dash side finisher. Refer to
INT-19, "Removal and Installation"
2. Remove the instrument lower panel RH and lower glove box. Refer to
IP-20, "Removal and Installation"
3. Disconnect the air mix door motor harness connector.
4. Remove the three screws and the air mix door motor.
Installation
Installation is in the reverse order of removal.
FRONT AIR MIX DOOR MOTOR - PASSENGER - ATC
Removal
1. Remove the front heater and cooling unit assembly. Refer to
VTL-18, "Removal and Installation"
.
2. Remove the steering member from the front heater and cooling unit assembly.
3. Disconnect the air mix door motor electrical connector.
4. Remove the three screws and the air mix door motor.
Installation
Installation is in the reverse order of removal.
FRONT AIR MIX DOOR MOTOR - MTC
Removal
1. Remove the front heater and cooling unit assembly. Refer to
VTL-18, "Removal and Installation"
.
2. Remove the steering member from the front heater and cooling unit assembly.
3. Disconnect the air mix door motor electrical connector.
WJIA1312E
1.
Heater and cooling unit assembly
2.
Intake door motor
3.
Air mix door motor
4.
Blower motor resistor
5.
Mode door motor
August 2012
2012 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст