Nissan Pathfinder (2012 year). Instruction — part 147
FRONT DOOR LOCK ACTUATOR LH (DOOR UNLOCK SENSOR)
DLK-71
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3.
CHECK UNLOCK SENSOR GROUND CIRCUIT
Check continuity between front door lock assembly LH (door unlock sensor) harness connector D14 terminal 4
and ground.
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Repair or replace harness.
4.
CHECK INTELLIGENT KEY UNIT OUTPUT SIGNAL
1. Connect Intelligent Key unit harness connector.
2. Check voltage between Intelligent Key unit harness connector M164 terminal 28 and ground.
Is the inspection result normal?
YES
>> Refer to
DLK-71, "Component Inspection"
NO
>> Replace Intelligent Key unit. Refer to
.
Component Inspection
INFOID:0000000007355435
1.
CHECK DOOR UNLOCK SENSOR
Check door unlock sensor.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace front lock assembly LH (door unlock sensor). Refer to
DLK-202, "Removal and Installa-
.
4 – Ground
: Continuity should exist.
ALKIA1186ZZ
28 – Ground
: Approx. 5V
WIIA1193E
ALKIA1187ZZ
Terminal
Front door lock assembly LH condition
Continuity
Front door lock assembly LH
4
6
Unlock
Yes
Lock
No
August 2012
2012 Pathfinder
2012 Pathfinder
DLK-72
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DOOR REQUEST SWITCH
DOOR REQUEST SWITCH
FRONT DOOR REQUEST SWITCH
FRONT DOOR REQUEST SWITCH : Description
INFOID:0000000007355436
Transmits lock/unlock operation to Intelligent Key unit.
FRONT DOOR REQUEST SWITCH : Component Function Check
INFOID:0000000007355437
1.
CHECK FUNCTION
With CONSULT
Check door request switch "DR REQ SW" and "AS REQ SW" in DATA MONITOR mode.
Is the inspection result normal?
YES
>> Door request switch is OK.
NO
>> Refer to
DLK-72, "FRONT DOOR REQUEST SWITCH : Diagnosis Procedure"
.
FRONT DOOR REQUEST SWITCH : Diagnosis Procedure
INFOID:0000000007355438
Regarding Wiring Diagram information, refer to
.
1.
CHECK FRONT DOOR REQUEST SWITCH
With CONSULT
Check front door request switch (“DR REQ SW” or “AS REQ SW”) in “DATA MONITOR” mode.
Without CONSULT
1. Turn ignition switch OFF.
2. Check voltage between Intelligent Key unit harness connector
M164 terminals 5, 25 and ground.
Is the inspection result normal?
YES
>> Front door request switch is OK.
NO
>> GO TO 2
2.
CHECK FRONT DOOR REQUEST SWITCH CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect Intelligent Key unit and front door request switch connectors.
Monitor item
Condition
DR REQ SW
AS REQ SW
Door request switch is pressed : ON
Door request switch is released : OFF
Monitor item
Condition
DR REQ SW
AS REQ SW
Front door request switch is pressed: ON
Front door request switch is released: OFF
Connector
Item
Terminals
Condition
Voltage (V)
(Approx.)
(+)
(–)
M164
Front door re-
quest switch
LH
5
Ground
Door request
switch is
pressed
↓
Door request
switch is re-
leased
0
↓
Battery voltage
Front door re-
quest switch
RH
25
WIIA1183E
August 2012
2012 Pathfinder
2012 Pathfinder
DOOR REQUEST SWITCH
DLK-73
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3. Check continuity between Intelligent Key unit harness connector (A) M164 terminals 5 (driver door), 25
(passenger door) and front door request switch harness connector (B) D16 (LH), D116 (RH) terminal 2.
4. Check continuity between Intelligent Key unit harness connector
(A) M164 terminals 5 (driver door), 25 (passenger door) and
ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Repair or replace harness between Intelligent Key unit and front door request switch.
3.
CHECK FRONT DOOR REQUEST SWITCH GROUND CIRCUIT
Check continuity between front door request switch harness connector D16 (driver door), D116 (passenger
door) terminal 1 and ground.
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Repair or replace door request switch ground circuit.
4.
CHECK FRONT DOOR REQUEST SWITCH OPERATION
DLK-74, "FRONT DOOR REQUEST SWITCH : Component Inspection"
Is the inspection result normal?
YES
>> GO TO 5
NO
>> Replace front door request switch.
5.
CHECK FRONT DOOR REQUEST SWITCH SIGNAL
1. Connect Intelligent Key unit connector.
2. Check voltage between Intelligent Key unit harness connector
M164 terminals 5, 25 and ground.
Is the inspection result normal?
YES
>> Refer to
GI-37, "Intermittent Incident"
.
NO
>> Replace Intelligent Key unit. Refer to
SEC-114, "Removal and Installation"
Driver side
5 - 2
: Continuity should exist.
Passenger side
25 - 2
: Continuity should exist.
5 - Ground
: Continuity should not exist.
25 - Ground
: Continuity should not exist.
ALKIA1188ZZ
1 - Ground
: Continuity should exist.
ALKIA1189ZZ
Connector
Item
Terminals
Condition
Voltage (V)
(Approx.)
(+)
(–)
M164
Front door re-
quest switch
LH
5
Ground
Door request
switch is
pressed
↓
Door request
switch is re-
leased
0
↓
Battery voltage
Front door re-
quest switch
RH
25
WIIA1183E
August 2012
2012 Pathfinder
2012 Pathfinder
DLK-74
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DOOR REQUEST SWITCH
FRONT DOOR REQUEST SWITCH : Component Inspection
INFOID:0000000007355439
1.
CHECK FRONT DOOR REQUEST SWITCH OPERATION
1. Turn ignition switch OFF.
2. Disconnect front door request switch connector.
3. Check continuity between front door request switch terminals 1
and 2.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace front door request switch.
BACK DOOR REQUEST SWITCH
BACK DOOR REQUEST SWITCH : Description
INFOID:0000000007355440
Transmits lock/unlock operation to Intelligent Key unit.
BACK DOOR REQUEST SWITCH : Component Function Check
INFOID:0000000007355441
1.
CHECK FUNCTION
With CONSULT
Check door request switch "BD/TR REQ SW" in DATA MONITOR mode.
Is the inspection result normal?
YES
>> Back door request switch is OK.
NO
>> Refer to
DLK-74, "BACK DOOR REQUEST SWITCH : Diagnosis Procedure"
.
BACK DOOR REQUEST SWITCH : Diagnosis Procedure
INFOID:0000000007355442
Regarding Wiring Diagram information, refer to
.
1.
CHECK BACK DOOR REQUEST SWITCH
With CONSULT
Check back door request switch “BD/TR REQ SW” in “DATA MONITOR” mode.
Without CONSULT
1. Turn ignition switch OFF.
Component
Terminals
Condition
Continuity
Front door request
switch (LH or RH)
1
2
Front door request
switch is pressed
Yes
Front door request
switch is released
No
ALKIA1190ZZ
Monitor item
Condition
BD/TR REQ SW
Back door request switch is pressed : ON
Back door request switch is released : OFF
Monitor item
Condition
BD/TR REQ SW
Back door request switch is pressed: ON
Back door request switch is released: OFF
August 2012
2012 Pathfinder
2012 Pathfinder
DOOR REQUEST SWITCH
DLK-75
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
2. Check voltage between Intelligent Key unit harness connector
M164 terminal 29 and ground.
Is the inspection result normal?
YES
>> Back door request switch is OK.
NO
>> GO TO 2
2.
CHECK BACK DOOR REQUEST SWITCH CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect Intelligent Key unit and back door request switch connectors.
3. Check continuity between Intelligent Key unit harness connector (A) M164 terminal 29 and back door
request switch harness connector (B) D552 terminal 1.
4. Check continuity between Intelligent Key unit harness connector
(A) M164 terminal 29 and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Repair or replace harness between Intelligent Key unit
and back door request switch.
3.
CHECK BACK DOOR REQUEST SWITCH GROUND CIRCUIT
Check continuity between back door request switch harness connector D552 terminal 2 and ground.
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Repair or replace back door request switch ground cir-
cuit.
4.
CHECK BACK DOOR REQUEST SWITCH OPERATION
DLK-76, "BACK DOOR REQUEST SWITCH : Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 5
NO
>> Replace back door request switch.
5.
CHECK BACK DOOR REQUEST SWITCH SIGNAL
1. Connect Intelligent Key unit connector.
Connector
Item
Terminals
Condition
Voltage (V)
(Approx.)
(+)
(–)
M164
Back door re-
quest switch
29
Ground
Back door re-
quest switch is
pressed
↓
Back door re-
quest switch is
released
0
↓
5
WIIA1185E
29 - 1
: Continuity should exist.
29 - Ground
: Continuity should not exist.
WIIA1188E
2 - Ground
: Continuity should exist.
WIIA1187E
August 2012
2012 Pathfinder
2012 Pathfinder
DLK-76
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DOOR REQUEST SWITCH
2. Check voltage between Intelligent Key unit harness connector
M164 terminal 29 and ground.
Is the inspection result normal?
YES
>> Refer to
GI-37, "Intermittent Incident"
.
NO
>> Replace Intelligent Key unit. Refer to
SEC-114, "Removal and Installation"
BACK DOOR REQUEST SWITCH : Component Inspection
INFOID:0000000007355443
1.
CHECK BACK DOOR REQUEST SWITCH OPERATION
1. Turn ignition switch OFF.
2. Disconnect back door request switch connector.
3. Check continuity between back door request switch terminals 1
and 2.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace back door request switch.
Connector
Item
Terminals
Condition
Voltage (V)
(Approx.)
(+)
(–)
M164
back door re-
quest switch
29
Ground
Back door re-
quest switch is
pressed
↓
Back door re-
quest switch is
released
0
↓
5
WIIA1183E
Component
Terminals
Condition
Continuity
Back door request
switch
1
2
Back door request
switch is pressed
Yes
Back door request
switch is released
No
WIIA1186E
August 2012
2012 Pathfinder
2012 Pathfinder
DOOR LOCK ACTUATOR
DLK-77
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR LOCK ACTUATOR
DRIVER SIDE
DRIVER SIDE : Description
INFOID:0000000007355444
Locks/unlocks the door with the signal from BCM.
DRIVER SIDE : Component Function Check
INFOID:0000000007355445
1.
CHECK FUNCTION
1. Use CONSULT to perform Active Test "DOOR LOCK".
2. Touch “ALL LOCK” or “ALL UNLOCK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-77, "DRIVER SIDE : Diagnosis Procedure"
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000007355446
Regarding Wiring Diagram information, refer to
DLK-139, "Wiring Diagram - With Intelligent Key System"
.
1.
CHECK DOOR LOCK ACTUATOR SIGNAL
1. Turn ignition switch OFF.
2. Check voltage between BCM connector M20 terminals 59, 65
and ground.
Is the inspection result normal?
YES
>> GO TO 2
NO
>> GO TO 3
2.
CHECK DOOR LOCK ACTUATOR HARNESS
1. Disconnect BCM and front door lock assembly LH (actuator).
2. Check continuity between BCM connector (A) M20 terminals 59,
65 and front door lock assembly LH (actuator) connector (B)
D14 terminals 1, 2.
Is the inspection result normal?
YES
>> Replace front door lock assembly LH (actuator).
NO
>> Repair or replace harness.
Connector
Terminals
Condition
Voltage (V)
(Approx.)
(+)
(-)
M20
59
Ground
Driver door lock/unlock
switch is turned to UN-
LOCK
0
→
Battery voltage
65
Driver door lock/unlock
switch is turned to LOCK
0
→
Battery voltage
LIIA1046E
Connector
Terminals
Connector
Terminals
Continuity
M20
59
D14
2
Yes
65
1
ALKIA1191ZZ
August 2012
2012 Pathfinder
2012 Pathfinder
DLK-78
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DOOR LOCK ACTUATOR
3.
CHECK DOOR LOCK ACTUATOR HARNESS
1. Disconnect BCM and front door lock assembly LH (actuator).
2. Check continuity between BCM connector M20 terminals 59, 65
and ground.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
BCS-53, "Removal and Installation"
NO
>> Repair or replace harness.
PASSENGER SIDE
PASSENGER SIDE : Description
INFOID:0000000007355447
Locks/unlocks the door with the signal from BCM.
PASSENGER SIDE : Component Function Check
INFOID:0000000007355448
1.
CHECK FUNCTION
1. Use CONSULT to perform Active Test DOOR LOCK.
2. Touch “ALL LOCK” or “ALL UNLOCK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-78, "PASSENGER SIDE : Diagnosis Procedure"
.
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000007355449
Regarding Wiring Diagram information, refer to
DLK-139, "Wiring Diagram - With Intelligent Key System"
.
1.
CHECK FRONT DOOR LOCK ACTUATOR RH SIGNAL
1. Turn ignition switch OFF.
2. Check voltage between BCM connector M20 terminals 65, 66
and ground.
Is the inspection result normal?
YES
>> GO TO 2
NO
>> GO TO 3
Connector
Terminals
Continuity
M20
59
Ground
No
65
ALKIA0633ZZ
Connector
Terminals
Condition
Voltage (V)
(Approx.)
(+)
(-)
M20
65
Ground
Door lock/unlock switch is
turned to LOCK
0
→
Battery voltage
for 300 ms
66
Door lock/unlock switch is
turned to UNLOCK
LIIA1048E
August 2012
2012 Pathfinder
2012 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст