Nissan Terrano model r20 series 2004. Instruction — part 61
AVAILABLE THRUST WASHER
Unit: mm (in)
Thrust washer thickness
Standard
2.275 - 2.325 (0.0896 - 0.0915)
Oversize
0.20 (0.0079)
2.475 - 2.525 (0.0974 - 0.0994)
0.40 (0.0157)
2.675 - 2.725 (0.1053 - 0.1073)
MISCELLANEOUS COMPONENTS
Unit: mm (in)
Gear train
Backlash of each gear
Standard
0.07 - 0.11 (0.0028 - 0.0043)
Limit
0.20 (0.0079)
Flywheel
Runout (Total indicator
reading)
Less than 0.15 (0.0059)
Front plate
Warpage limit
0.2 (0.008)
Cylinder head
Head surface distorsion
Standard
Less than 0.07 (0.0028)
Limit
0.2 (0.008)
Minimum height
89.7 (3.532)
SERVICE DATA AND SPECIFICATIONS (SDS)
TD27Ti
Inspection and Adjustment (Cont’d)
EM-150
ENGINE LUBRICATION &
COOLING SYSTEMS
CONTENTS
ZD
Liquid Gasket Application Procedure . . . . . . ..2
Special Service Tools . . . . . . . . . . . . ..2
. . . . . . . . ..3
Lubricating Circuit . . . . . . . . . . . . . . 3
Oil Pressure Check. . . . . . . . . . . . . ..4
Oil Pump . . . . . . . . . . . . . . . . . ..5
Oil Jet. . . . . . . . . . . . . . . . . . ...7
Oil Cooler. . . . . . . . . . . . . . . . . .8
. . . . . . . . . . ..9
Cooling Circuit . . . . . . . . . . . . . . . .9
System Check. . . . . . . . . . . . . . . 10
Water Pump . . . . . . . . . . . . . . . ... 11
Thermostat. . . . . . . . . . . . . . . . .12
Water Outlet. . . . . . . . . . . . . . . ...13
Radiator . . . . . . . . . . . . . . . . . .14
Cooling Fan (Crankshaft driven) . . . . . . . ...15
EGR Cooler . . . . . . . . . . . . . . . ...16
SERVICE DATA AND SPECIFICATIONS (SDS)
. . ..17
Engine Lubrication System. . . . . . . . . . 17
Engine Cooling System . . . . . . . . . . . .17
TD27Ti
. . . . . . . . . . . . . . . ..18
. . . . . . . . . . . . . . . . 19
. . . . . . . . 20
Lubrication Circuit . . . . . . . . . . . . . ..20
Oil Pressure Check. . . . . . . . . . . . . 21
Oil Pump . . . . . . . . . . . . . . . . . 22
Oil Filter Bracket . . . . . . . . . . . . . . 24
Oil Cooler. . . . . . . . . . . . . . . . ...25
Oil Jet. . . . . . . . . . . . . . . . . . .26
. . . . . . . . . . 27
Cooling Circuit . . . . . . . . . . . . . . ...27
System Inspection . . . . . . . . . . . . . .28
Water Pump . . . . . . . . . . . . . . . ...29
Thermostat. . . . . . . . . . . . . . . . .31
Radiator . . . . . . . . . . . . . . . . . .32
Cooling Fan . . . . . . . . . . . . . . . ...33
SERVICE DATA AND SPECIFICATIONS (SDS)
. . ..34
Engine Lubrication System. . . . . . . . . . 34
Engine Cooling System . . . . . . . . . . . .34
Liquid Gasket Application Procedure
a. Use a scraper to remove all traces of old liquid gasket from
mating surfaces and grooves. Also, completely clean any oil
from these areas.
b. Apply a continuous bead of liquid gasket to mating surfaces.
(Use Genuine Liquid Gasket or equivalent.)
I
For oil pan, be sure liquid gasket diameter is 3.5 to 4.5 mm
(0.138 to 0.177 in).
I
For areas except oil pan, be sure liquid gasket diameter is
2.0 to 3.0 mm (0.079 to 0.118 in).
c. Apply liquid gasket around the inner side of bolt holes (unless
otherwise specified).
d. Assembly should be done within 5 minutes after coating.
e. Wait at least 30 minutes before refilling engine oil and engine
coolant.
Special Service Tools
*: Special tool or commercial equivalent
Tool number
Tool name
Description
ST25051001*
Oil pressure gauge
NT558
Measuring oil pressure
Maximum measuring range:
2,452 kPa (24.5 bar, 25
kg/cm
2
, 356 psi)
ST25052000*
Hose
NT559
Adapting oil pressure gauge
to cylinder block
EG17650301
Radiator cap tester
adapter
NT564
Adapting radiator cap tester
to radiator filler neck and reser-
voir tank cap
a: 28 (1.10) dia.
b: 31.4 (1.236) dia.
c: 41.3 (1.626) dia.
Unit: mm (in)
SEM164F
AEM080
PRECAUTIONS AND PREPARATION
ZD
LC-2
Lubricating Circuit
SLC361B
ENGINE LUBRICATION SYSTEM
ZD
LC-3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст