Nissan Murano Z51. Instruction — part 451
DLK-312
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
HOOD
4.
Remove hood hinge mounting nuts on the hood to remove the hood assembly.
CAUTION:
Perform work with 2 workers, because of its heavy weight.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Perform work with 2 workers, because of its heavy weight.
• Before installing the hood hinge, apply anticorrosive agent onto the mounting surface of the vehicle
body.
• After installing, perform hood fitting adjustment. Refer to
DLK-312, "HOOD ASSEMBLY : Adjust-
HOOD ASSEMBLY : Adjustment
INFOID:0000000005517768
1.
Hood assembly
2.
Hood bumper rubber side
3.
Hood hinge
4.
Hood lock assembly
5.
Front grille
6.
Front fender
Refer to
for symbols in the figure.
JMKIA1834GB
HOOD
DLK-313
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Check the clearance and the surface height between hood and each part by visually and touching.
If the clearance and the surface height are out of specification, adjust them according to the procedures
shown below.
Unit: mm (in)
1.
Remove hood lock and adjust the height by rotating hood bumper rubber side until hood becomes 1 to1.5
mm (0.039 to 0.059 in) lower than fender.
2.
Temporarily tighten hood lock, and position by engaging it with hood striker. Check hood lock and striker
for looseness and adjust the clearance and evenness with striker to satisfy the specification.
3.
Adjust A and B shown in the figure to the following value with hood's own weight by dropping it from
approximately 200 mm (7.874 in) height or by pressing hood lightly [approximately 29 N (3.0 kg, 6.5lb)].
4.
After adjustment tighten lock bolts to the specified torque.
HOOD HINGE
Portion
Standard
Difference
(RH/LH)
Hood – Front grille
A – A
D
Clearance
3.4 – 7.4 (0.134 – 0.291)
—
E Surface height - 1.4 – 2.6 (- 0.055 – 0.102)
—
Hood – Front fender
B – B
F
Clearance
2.4 – 5.0 (0.094 – 0.197)
< 1.5 (0.059)
G Surface height - 1.3 – 1.3 (- 0.051 – 0.051)
—
C – C
H
Clearance
2.7 – 4.7 (0.106 – 0.185)
< 1.5 (0.059)
I
Surface height - 1.4 – 1.4 (- 0.055 – 0.055)
—
1.
Hood striker
2.
Primary latch
3.
Secondary striker
4.
Secondary latch
A
: 20.0 mm (0.787 in)
B
: 6.8 mm (0.268 in)
PIIB5794E
DLK-314
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
HOOD
HOOD HINGE : Exploded View
INFOID:0000000005517769
HOOD HINGE : Removal and Installation
INFOID:0000000005517770
REMOVAL
1.
Remove hood assembly. Refer to
DLK-311, "HOOD ASSEMBLY : Removal and Installation"
2.
Remove front fender. Refer to
DLK-319, "Removal and Installation"
3.
Remove hood hinge mounting bolts, and then remove hood hinge.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Before installation of hood hinge, apply anticorrosive agent onto the mounting surface of the vehicle
body.
• After installation, apply touch-up paint (the body color) onto the head of the hinge mounting bolts
and nuts.
• After installation, perform hood fitting adjustment. Refer to
DLK-312, "HOOD ASSEMBLY : Adjust-
HOOD STAY
1.
Hood assembly
2.
Hood front seal
3.
Hood insulator
4.
Hood stay
5.
Hood hinge
6.
Stud ball
7.
Hood bumper rubber
8.
Radiator core seal
Refer to
for symbols in the figure.
JMKIA1797ZZ
HOOD
DLK-315
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
HOOD STAY : Exploded View
INFOID:0000000005517771
HOOD STAY : Removal and Installation
INFOID:0000000005517772
REMOVAL
1.
Remove the metal clip (3) located on the connection between
the hood stay (1) and the stud ball (2) (hood side), by using a
flat-bladed screwdriver (A).
2.
Disengage the stud ball from the hood stay (hood side).
3.
Repeat the same operation to disengage the stud ball from the
hood stay (body side), then remove the hood stay.
INSTALLATION
Install in the reverse order of removal.
1.
Hood assembly
2.
Hood front seal
3.
Hood insulator
4.
Hood stay
5.
Hood hinge
6.
Stud ball
7.
Hood bumper rubber
8.
Radiator core seal
Refer to
JMKIA1797ZZ
JMKIA2255ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст