Nissan Murano Z51. Instruction — part 931
ASHTRAY ILLUMINATION
INL-125
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
ASHTRAY ILLUMINATION
Exploded View
INFOID:0000000005516807
Replacement
INFOID:0000000005516808
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
ASHTRAY ILLUMINATION BULB
1.
Remove the console finisher assembly. Refer to
.
2.
Rotate the bulb socket counterclockwise and unlock it.
3.
Remove the bulb.
1.
Bulb socket
2.
Bulb
JPLIA0830ZZ
INL-126
< REMOVAL AND INSTALLATION >
GLOVE BOX LAMP
GLOVE BOX LAMP
Exploded View
INFOID:0000000005516809
Replacement
INFOID:0000000005516810
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
GLOVE BOX LAMP BULB
1.
Remove the glove box assembly. Refer to
2.
Rotate the bulb socket counterclockwise and unlock it.
3.
Remove the bulb.
1.
Bulb
2.
Bulb socket
JPLIA0832ZZ
STEP LAMP
INL-127
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
STEP LAMP
Exploded View
INFOID:0000000005516811
Removal and Installation
INFOID:0000000005516812
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Insert any appropriate tool into the gap between the step lamp and the door trim. Remove the step lamp.
2.
Disconnect the connector.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000005516813
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
STEP LAMP BULB
1.
Insert any appropriate tool into the gap between the lens. Remove the lens.
2.
Remove the bulb.
1.
Step lamp case
2.
Bulb
3.
Lens
A
Metal clip
JPLIA1437ZZ
INL-128
< REMOVAL AND INSTALLATION >
PERSONAL LAMP
PERSONAL LAMP
Exploded View
INFOID:0000000005516814
NOTE:
Replace the personal lamp case as a set (right and left). After removing the headlining assembly, remove the
personal lamp case. Refer to
INT-26, "NORMAL ROOF : Exploded View"
(Normal roof) or
(With sunroof).
Removal and Installation
INFOID:0000000005516815
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Remove the headlining assembly. Refer to
INT-26, "NORMAL ROOF : Exploded View"
(Normal roof) or
INT-30, "SUNROOF : Exploded View"
(With sunroof).
2.
Insert any appropriate tool into the gap between the lens. Remove the lens.
3.
Press the both side pawls (A) to the arrow direction (
).
Remove the personal lamp finisher.
4.
Remove the personal lamp case from the headlining assembly.
NOTE:
Replace the personal lamp case as a set (right and left).
INSTALLATION
Install in the reverse order of removal.
NOTE:
The following is easier to install the personal lamp finisher.
1.
Personal lamp case
2.
Personal lamp finisher
3.
Lens
4.
Bulb
JPLIA0834ZZ
JPLIA0087ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст