Nissan Murano Z51. Instruction — part 1185
RF-80
< SYMPTOM DIAGNOSIS >
SUNSHADE SYSTEM DOES NOT OPERATE PROPERLY
SUNSHADE SYSTEM DOES NOT OPERATE PROPERLY
Diagnosis Procedure
INFOID:0000000005516852
1.
CHECK SUNSHADE MECHANISM
Check the following.
• Operation malfunction caused by sunshade mechanism deformation, pinched harness or other foreign
materials
• Operation malfunction and interference with other parts by poor installation
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK SUNSHADE MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT
Check sunshade motor assembly power supply and ground circuit.
Refer to
RF-12, "SUNSHADE MOTOR ASSEMBLY : Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK COMMUNICATION CIRCUIT
Check communication circuit.
Refer to
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the harness.
4.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> GO TO 1.
AUTO OPERATION DOES NOT OPERATE
RF-81
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
AUTO OPERATION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000005516853
1.
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is executed and operation is confirmed.
Refer to
RF-4, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement"
.
Is the inspection result normal?
YES
>> Sunroof and sunshade system is normal.
NO
>> GO TO 2.
2.
CHECK SUNROOF SWITCH
Check sunroof switch.
Refer to
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> GO TO 1.
RF-82
< SYMPTOM DIAGNOSIS >
RETAINED POWER OPERATION DOES NOT OPERATE PROPERLY
RETAINED POWER OPERATION DOES NOT OPERATE PROPERLY
Diagnosis Procedure
INFOID:0000000005516854
1.
CHECK DOOR SWITCH
Check door switch.
Refer to
RF-17, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> GO TO 1.
ANTI-PINCH FUNCTION DOES NOT OPERATE
RF-83
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
ANTI-PINCH FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000005516855
1.
CHECK SUNROOF AND SUNSHADE MECHANISM
Check the following.
• Operation malfunction caused by sunroof and sunshade mechanism deformation, pinched harness or other
foreign materials
• Operation malfunction and interference with other parts by poor installation
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
PERFORM INITIALIZATION
Perform initialization procedure.
Refer to
RF-4, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement"
.
Is the inspection result normal?
YES
>> Sunroof and sunshade system is normal.
NO
>> GO TO 1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст