Nissan Murano Z51. Instruction — part 1125

PG

PRECAUTIONS

PG-117

< PRECAUTION >

[POWER SUPPLY&GROUND CIRCUIT]

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly
causing serious injury.

• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the

battery, and wait at least 3 minutes before performing any service.

PG-118

< PREPARATION >

[POWER SUPPLY&GROUND CIRCUIT]

PREPARATION

PREPARATION

PREPARATION

Special Service Tools

INFOID:0000000005516924

Tool number
(Kent-Moore No.)
Tool name

Description

—

(J-48087)
Battery Service Center

Tests battery.
For operating instructions, refer to Technical
Service Bulletin and Battery Service Center
User Guide.

WKIA5280E

PG

BATTERY

PG-119

< REMOVAL AND INSTALLATION >

[POWER SUPPLY&GROUND CIRCUIT]

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

REMOVAL AND INSTALLATION

BATTERY

Exploded View

INFOID:0000000005516925

Removal and Installation

INFOID:0000000005516926

REMOVAL

1.

Remove air duct (inlet). Refer to

EM-31, "Exploded View"

.

2.

Remove the nut and bolt (1) and remove the bracket (2) from
battery fix frame.

3.

Remove cover of battery positive terminal.

4.

Loosen battery terminal nuts (1), and disconnect both battery
cables from battery terminals.

CAUTION:

When disconnecting, disconnect the battery cable from the
negative terminal first.

5.

Remove battery fix frame mounting nuts (2) and battery fix
frame (3).

6.

Remove battery.

INSTALLATION

Install in the reverse order of removal.

CAUTION:

When connecting, connect the battery cable to the positive terminal first.

1

: Battery terminal (+)

2

: Battery fix frame mounting nuts

3

: Battery fix frame

4

: Battery terminal (

−

)

JPMIA0793ZZ

JPMIA0826ZZ

JPMIA0794ZZ

Battery fix frame mounting nut

: 3.92 N·m (0.40 kg-m, 35 in-lb)

Battery terminal nut

: 5.4 N·m (0.55 kg-m, 48 in-lb)

PG-120

< REMOVAL AND INSTALLATION >

[POWER SUPPLY&GROUND CIRCUIT]

BATTERY

Reset electronic systems as necessary. Refer to

GI-54, "ADDITIONAL SERVICE WHEN REMOVING BAT-

TERY NEGATIVE TERMINAL : Required Procedure After Battery Disconnection"

.