Nissan Murano Z51. Instruction — part 461
DLK-352
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
REAR DOOR LOCK
5.
While pulling outside handle, remove outside handle escutch-
eon.
6.
While pulling outside handle (1), slide toward rear of vehicle to
remove outside handle.
7.
Remove front gasket and rear gasket.
8.
While pulling outside handle bracket, slide toward rear of vehicle
to remove outside handle bracket.
9.
Reach in to separate outside handle cable connection on outside handle bracket.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Check door open/close, lock/unlock operation after installation.
JMKIA0560ZZ
JMKIA0524ZZ
PIIB5814E
BACK DOOR LOCK
DLK-353
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
BACK DOOR LOCK
DOOR LOCK
DOOR LOCK : Exploded View
INFOID:0000000005517823
DOOR LOCK : Removal and Installation
INFOID:0000000005517824
REMOVAL
1.
Remove back door finisher inner. Refer to
INT-38, "Removal and Installation"
2.
Disconnect back door lock assembly and back door opener switch connectors.
3.
Remove back door lock mounting bolts, and then remove back door lock assembly.
JMKIA1804GB
1.
TORX bolt
2.
Back door assembly
3.
Power back door drive assembly
4.
Back door lock assembly (normal)
5.
Back door lock assembly (super lock)
6.
Touch sensor (RH/LH)
7.
Cover
8.
Patch
Refer to
for symbols in the figure.
DLK-354
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
BACK DOOR LOCK
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Check back door open/close, lock/unlock operation after installation.
POWER BACK DOOR DRIVE ASSEMBLY
POWER BACK DOOR DRIVE ASSEMBLY : Exploded View
INFOID:0000000005517825
POWER BACK DOOR DRIVE ASSEMBLY : Removal and Installation
INFOID:0000000005517826
REMOVAL
JMKIA1804GB
1.
TORX bolt
2.
Back door assembly
3.
Power back door drive assembly
4.
Back door lock assembly (normal)
5.
Back door lock assembly (super lock)
6.
Touch sensor (RH/LH)
7.
Cover
8.
Patch
Refer to
for symbols in the figure.
BACK DOOR LOCK
DLK-355
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
1.
Remove headlining. Refer to
INT-27, "NORMAL ROOF : Removal and Installation"
(NORMAL ROOF),
INT-30, "SUNROOF : Removal and Installation"
(SUNROOF).
2.
Disconnect power back door drive assembly connector.
3.
Remove mounting bolts of power back door drive assembly (1)
(back door side).
4.
Remove mounting bolts of power back door drive assembly (1)
(body side), and then remove power back door drive assembly.
CAUTION:
Remove the bolts of power back door drive assembly refer-
ring to figure.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Install the bolts of power back door drive assembly in the reverse order of removal.
• Check back door open/close operation after installation.
TOUCH SENSOR
JMKIA1918ZZ
JMKIA1919ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст