Nissan Murano Z51. Instruction — part 1451
ROAD TEST
TM-155
< PERIODIC MAINTENANCE >
[CVT: RE0F09B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
ROAD TEST
Description
INFOID:0000000005514098
DESCRIPTION
• The purpose of the test is to determine the overall performance of
CVT and analyze causes of problems.
• The road test consists of the following three parts:
1.
“Check Before Engine Is Started”
2.
“Check at Idle”
.
3.
“Cruise Test”
.
• Before the road test, familiarize yourself with all test procedures
and items to check.
• Perform tests for all the check items until a malfunction phenome-
non is detected. Perform diagnosis for NG items after the comple-
tion of road tests.
Check before Engine Is Started
INFOID:0000000005514099
1.
CHECK OD OFF INDICATOR LAMP
1.
Park vehicle on flat surface.
2.
Move selector lever to “P” position.
3.
Turn ignition switch OFF. Wait at least 5 seconds.
4.
Turn ignition switch ON. (Do not start engine.)
Has OD OFF indicator lamp been turned ON for about 2 seconds?
YES
>> 1.
Turn ignition switch OFF.
2.
Perform self-diagnosis and note NG items. Refer to
.
3.
Go to
.
NO
>> Stop “Road Test”. Refer to
.
Check at Idle
INFOID:0000000005514100
1.
CHECK STARTING THE ENGINE (PART 1)
1.
Park vehicle on flat surface.
2.
Move selector lever to “P” or “N” position.
3.
Turn ignition switch OFF.
4.
Turn ignition switch to “START” position.
Is engine started?
YES
>> GO TO 2.
NO
>> Stop “Road Test”. Refer to
.
2.
CHECK STARTING THE ENGINE (PART 2)
1.
Turn ignition switch ON.
2.
Move selector lever to “D”, “L” or “R” position.
3.
Turn ignition switch to “START” position.
Is engine started?
SAT786A
SAT496G
TM-156
< PERIODIC MAINTENANCE >
[CVT: RE0F09B]
ROAD TEST
YES
>> Stop “Road Test”. Refer to
.
NO
>> GO TO 3.
3.
CHECK “P” POSITION FUNCTION
1.
Move selector lever to “P” position.
2.
Turn ignition switch OFF.
3.
Release parking brake.
4.
Push vehicle forward or backward.
5.
Apply parking brake.
Does vehicle move forward or backward?
YES
>> Refer to
. GO TO 4.
NO
>> GO TO 4.
4.
CHECK “N” POSITION FUNCTION
1.
Start engine.
2.
Move selector lever to “N” position.
3.
Release parking brake.
Does vehicle move forward or backward?
YES
>> Refer to
. GO TO 5.
NO
>> GO TO 5.
5.
CHECK SHIFT SHOCK
1.
Apply foot brake.
2.
Move selector lever to “R” position.
Is there large shock when changing from “N” to “R” position?
YES
>> Refer to
. GO TO 6.
NO
>> GO TO 6.
6.
CHECK “R” POSITION FUNCTION
Release foot brake for several seconds.
Does vehicle creep backward when foot brake is released?
YES
>> GO TO 7.
NO
>> Refer to
. GO TO 7.
7.
CHECK “D” POSITION FUNCTION
Move selector lever to “D” and “L” position and check if vehicle creeps forward.
Does vehicle creep forward in all positions?
YES
>> Go to
NO
>> Stop “Road Test”. Refer to
.
Cruise Test
INFOID:0000000005514101
1.
CHECK VEHICLE SPEED WHEN SHIFTING GEARS (PART 1)
1.
Drive vehicle for approximately 10 minutes to warm engine oil and CVT fluid up to operating temperature.
2.
Park vehicle on flat surface.
3.
Move selector lever to “P” position.
4.
Start engine.
5.
Move selector lever to “D” position.
CVT fluid operating temperature
: 50 – 80
°
C (122 – 176
°
F)
ROAD TEST
TM-157
< PERIODIC MAINTENANCE >
[CVT: RE0F09B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
6.
Accelerate vehicle at 2/8 throttle opening and check “Vehicle
Speed When Shifting Gears”.
With CONSULT-III
-
Read vehicle speed and engine speed. Refer to
cle Speed When Shifting Gears"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
. GO TO 2.
2.
CHECK VEHICLE SPEED WHEN SHIFTING GEARS (PART 2)
1.
Park vehicle on flat surface.
2.
Move selector lever to “D” position.
3.
Accelerate vehicle at 8/8 throttle opening and check “Vehicle
Speed When Shifting Gears”.
With CONSULT-III
-
Read vehicle speed and engine speed. Refer to
cle Speed When Shifting Gears"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Refer to
. GO TO 3.
3.
CHECK OVERDRIVE OFF CONDITION (PART 1)
1.
Park vehicle on flat surface.
2.
Push overdrive control switch.
3.
Accelerate vehicle at 2/8 throttle opening and check “Vehicle
Speed When Shifting Gears”.
With CONSULT-III
-
Read vehicle speed and engine speed. Refer to
cle Speed When Shifting Gears"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Refer to
. GO TO 4.
4.
CHECK OVERDRIVE OFF CONDITION (PART 2)
1.
Park vehicle on flat surface.
2.
Push overdrive control switch.
3.
Accelerate vehicle at 8/8 throttle opening and check “Vehicle
Speed When Shifting Gears”.
With CONSULT-III
-
Read vehicle speed and engine speed. Refer to
cle Speed When Shifting Gears"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Refer to
. GO TO 5.
5.
CHECK “L” POSITION FUNCTION (PART 1)
1.
Park vehicle on flat surface.
2.
Move selector lever to “L” position.
SCIA6644E
SCIA4366E
SCIA6644E
SCIA4366E
TM-158
< PERIODIC MAINTENANCE >
[CVT: RE0F09B]
ROAD TEST
3.
Accelerate vehicle at 2/8 throttle opening and check “Vehicle
Speed When Shifting Gears”.
With CONSULT-III
-
Read vehicle speed and engine speed. Refer to
cle Speed When Shifting Gears"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Refer to
. GO TO 6.
6.
CHECK “L” POSITION FUNCTION (PART 2)
1.
Park vehicle on flat surface.
2.
Move selector lever to “L” position.
3.
Accelerate vehicle at 8/8 throttle opening and check “Vehicle
Speed When Shifting Gears”.
With CONSULT-III
-
Read vehicle speed and engine speed. Refer to
cle Speed When Shifting Gears"
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Refer to
. GO TO 7.
7.
CHECK ENGINE BRAKE FUNCTION
Check engine brake.
Does engine braking effectively reduce vehicle speed in “L” position?
YES
>> 1.
Stop the vehicle.
2.
Perform “Self Diagnostic Results” in “TRANSMISSION”.
NO
>> Refer to
. Then continue trouble diagnosis.
SCIA6644E
SCIA4366E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст