Nissan Murano Z51. Instruction — part 380
DLK-28
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
BACK DOOR OPEN FUNCTION : Component Parts Location
INFOID:0000000005575259
1.
BCM M118, M119, M120, M121, M122,
M123
2.
TCM F23
3.
Intelligent key warning buzzer E25
4.
IPDM E/R E10, E11
5.
Remote keyless entry receiver M78
6.
Combination meter M34
7.
Key slot M99
8.
CVT shift selector (detention switch)
M57
9.
Inside key antenna (console) M262
JMKIA4838ZZ
INTELLIGENT KEY SYSTEM
DLK-29
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
BACK DOOR OPEN FUNCTION : Component Description
INFOID:0000000005517450
10. Inside key antenna (luggage room) B86
11.
Front outside handle LH (outside key
antenna) D12
12.
Front outside handle LH (request
switch) D11
13. Outside key antenna (rear bumper) B85
14.
Front door switch (driver side) B34
A.
Behind the combination meter
B.
Engine room (LH)
C.
Behind the instrument lower panel
RH
D.
Behind the center console
E.
Under the rear seat seatback
F.
View with rear bumper removed
JMKIA1933ZZ
1.
Back door lock assembly
With automatic back door: D179
Without automatic back door: D180
2.
Front door lock assembly (driver side) D9
3.
Rear door lock assembly LH D85
4.
Automatic back door control unit B7, B8
5.
Back door opener switch assembly (open-
er switch) D186
6.
Back door opener switch assembly
(request switch) D186
7.
Intelligent Key
A.
View with front door finisher removed
B.
View with rear door finisher removed
C. Behind the luggage side finisher
lower (LH)
Item
Function
BCM
Controls the back door open function and room lamp function.
Back door opener switch
Input press/degrees signal to BCM.
Door lock actuator
Receives lock/unlock signal from BCM and locks/unlocks each door.
Door switch
Input door open/close condition to BCM.
Remote keyless entry receiver
Receives lock/unlock signal from the Intelligent Key, and then transmits to BCM.
Request switch (back door)
Input lock/unlock operation to BCM.
Intelligent Key
Transmits button operation to remote keyless entry receiver.
Outside key antenna (rear bumper)
Detects if Intelligent Key is outside the vehicle.
Inside key antenna
Detects if Intelligent Key is inside the vehicle.
DLK-30
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
REMOTE KEYLESS ENTRY FUNCTION
REMOTE KEYLESS ENTRY FUNCTION : System Diagram
INFOID:0000000005517451
REMOTE KEYLESS ENTRY FUNCTION : System Description
INFOID:0000000005517452
The Intelligent Key has the same functions as the remote control entry system. Therefore, it can be used in the
same manner as the Intelligent Ke by operating the door lock/unlock button.
OPERATION
Remote keyless entry system controls operation of the
• Door lock/unlock
• Automatic back door open
• Selective unlock
• Hazard and horn reminder
• Auto door lock
• Panic alarm
• Power window down
OPERATION AREA
To ensure the Intelligent Key works effectively, use within 1 m (3 ft) range of each doors, however the operable
range may differ according to surroundings.
DOOR LOCK/UNLOCK FUNCTION
• When door lock/unlock button of the Intelligent Key is pressed, lock signal or unlock signal is transmits from
Intelligent Key to BCM via remote keyless entry receiver.
• When BCM receives the door lock/unlock signal, it operates door lock actuator, flashes the hazard warning
lamp (lock: 2 time, unlock: 1 times) and horn chirp signal to IPDM E/R at the same time as a reminder.
• IPDM E/R honks horn (lock: 2 time) as a reminder
OPERATION CONDITION
AUTOMATIC BACK DOOR OPEN FUNCTION
Intelligent Key warning buzzer
Warns the user of the back door open/close condition and inappropriate operations with the
buzzer sound.
Automatic back door control unit
Controls back door open/close automatically.
Item
Function
JMKIA1995GB
Remote controller operation
Operation condition
Operation
Lock
• All doors closed
All doors lock
Unlock
• Intelligent Key is out of key slot
All doors unlock
INTELLIGENT KEY SYSTEM
DLK-31
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
When back door button of Intelligent Key is pressed for more than 1 second, back door open automatically for
detailed description, refer to
.
SELECTIVE UNLOCK FUNCTION
When an LOCK signal is transmitted from Intelligent Key, all doors will be locked.
When an UNLOCK signal is transmitted from Intelligent Key once, driver's door will be unlocked.
Then, if an UNLOCK signal is transmitted from Intelligent Key again within 60 seconds, all other door will be
unlocked.
HAZARD AND HORN REMINDER FUNCTION
When doors are locked or unlocked by Intelligent Key, BCM flashes hazard warning lamps as a reminder.
The hazard and horn reminder has a horn chirp mode (C mode) and a non-horn chirp mode (S mode).
Operating Function of Hazard and Horn Reminder
Hazard and horn reminder does not operate if any door switch is ON (any door is OPEN).
How to Change Hazard and Horn Reminder Mode
With CONSULT-III
DLK-56, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Without CONSULT-III
When LOCK and UNLOCK signals are sent from the Intelligent Key for more than 2 seconds at the same time,
the hazard and horn reminder mode is changed and hazard warning lamp blinks and horn sounds as follows:
AUTO DOOR LOCK FUNCTION
When all doors are locked, ignition switch is OFF (ignition switch is not pressed) and key switch is OFF (Intel-
ligent Key is not inserted in key slot), doors are unlocked with Intelligent Key button. When BCM does not
receive the following signals within 30 seconds, all doors are locked.
• Door switch is ON (door is opened)
• Door is locked
• Ignition switch is ON
• Key switch is ON (Intelligent Key is inserted in key slot)
Auto door lock mode can be changed by “AUTO LOCK SET” mode in “WORK SUPPORT”. Refer to
"INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
PANIC ALARM FUNCTION
When ignition switch is OFF (ignition switch is not pressed) and key switch is OFF (Intelligent Key is not
inserted in key slot), BCM receives PANIC ALARM signal from Intelligent Key.
BCM turns on and off headlamp intermittently and transmits theft warning horn signal to IPDM E/R. Then,
IPDM E/R turns on and off horn intermittently.
The headlamp blinks and the horn sounds intermittently.
The alarm automatically turns off:
• After 25 seconds
• When BCM receives any signal from Intelligent Key
Panic alarm function mode can be changed by “PANIC ALARM SET” mode in “WORK SUPPORT”. Refer to
DLK-56, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
C mode
S mode
Intelligent Key operation
Lock
Unlock
Lock
Unlock
Hazard warning lamp blink
Twice
Once
Twice
—
Horn sound
Once
—
—
—
JMKIA2755GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст