Nissan Murano Z51. Instruction — part 1237
SE-136
< REMOVAL AND INSTALLATION >
HEATED SEAT SWITCH
HEATED SEAT SWITCH
FRONT SEAT
FRONT SEAT : Exploded View
INFOID:0000000005518248
FRONT SEAT : Removal and Installation
INFOID:0000000005518249
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect from damage.
1.
Remove the console switch finisher (1). Refer to
2.
Remove front heated seat switch (driver side) (2) from console
switch finisher. With flat bladed screw driver (A).
NOTE:
The same procedure is also performed for passenger side.
INSTALLATION
Install in the reverse order of removal.
REAR SEAT
1.
Front heated seat switch (driver
side)
2.
Front heated seat switch (passenger
side)
3.
Console switch finisher
JMJIA1453ZZ
: Pawl
JMJIA1454ZZ
HEATED SEAT SWITCH
SE-137
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
REAR SEAT : Exploded View
INFOID:0000000005518250
REAR SEAT : Removal and Installation
INFOID:0000000005518251
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the heated seat switch finisher (2). Refer to
INT-16, "REAR DOOR FINISHER : Exploded View"
2.
Remove rear heated seat switch (1) from heated seat switch fin-
isher. With flat bladed screw driver (A).
INSTALLATION
Install in the reverse order of removal.
1.
Rear heated seat switch
2.
Heated seat switch finisher
JMJIA1456ZZ
: Pawl
JMJIA1455ZZ
SE-138
< REMOVAL AND INSTALLATION >
FRONT POWER RETURN SWITCH
FRONT POWER RETURN SWITCH
Exploded View
INFOID:0000000005518252
.
Removal and Installation
INFOID:0000000005518253
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the instrument lower panel (LH) (1). Refer to
IP-13, "Removal and Installation"
2.
Remove front power return switch (1) from switch bracket. With
flat bladed screw driver (A).
INSTALLATION
Install in the reverse order of removal.
: Pawl
JMJIA1415ZZ
REAR POWER RETURN SWITCH
SE-139
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
REAR POWER RETURN SWITCH
Exploded View
INFOID:0000000005518254
Removal and Installation
INFOID:0000000005518255
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the seatback control lever escutcheon.
2.
Remove rear power return switch (1) from seatback control lever
escutcheon. With flat bladed screw driver (A).
INSTALLATION
Install in the reverse order of removal.
1.
Rear power return switch
2.
Seatback control lever escutcheon
JMJIA1411ZZ
: Pawl
JMJIA1412ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст