Nissan Murano Z51. Instruction — part 67
AV
ROOF ANTENNA
AV-47
< REMOVAL AND INSTALLATION >
[BASE AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ROOF ANTENNA
Exploded View
INFOID:0000000005528447
Removal and Installation
INFOID:0000000005528448
REMOVAL
1.
Remove headlining assembly (rear) to secure work space between vehicle and headlining. Refer to
26, "NORMAL ROOF : Exploded View"
[without sunroof] or
INT-30, "SUNROOF : Exploded View"
[with
sunroof].
2.
Disconnect AM/FM main connector.
3.
Remove antenna base nut, and then remove antenna base from roof panel.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be careful about tightening torque. When the antenna base mounting nut tightening torque is loose,
the antenna sensitivity becomes poor, and when it is excessive, the roof panel may be deformed.
JPNIA0776ZZ
1.
Rod antenna
2.
Antenna base
Antenna base mounting nut
: 6.5 N·m (0.66 kg-m, 58 in-lb)
AV-48
< REMOVAL AND INSTALLATION >
[BASE AUDIO]
ANTENNA FEEDER (RADIO)
ANTENNA FEEDER (RADIO)
Harness Layout
INFOID:0000000005528449
JPNIA0777GB
AV
DIAGNOSIS AND REPAIR WORK FLOW
AV-49
< BASIC INSPECTION >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000005528450
OVERALL SEQUENCE
• Reference 1··· Refer to
AV-87, "CONSULT-III Function (MULTI AV)"
.
• Reference 2··· Refer to
.
• Reference 3··· Refer to
DETAILED FLOW
1.
INTERVIEW AND SYMPTOM CONFIRMATION
Check the malfunction symptoms by performing the following items.
• Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-
tion occurred).
• Check the symptom.
Is the occurring symptom a malfunction?
YES
>> GO TO 2.
NO
>> INSPECTION END
2.
DIAGNOSIS WITH CONSULT-III
JSNIA0732GB
AV-50
< BASIC INSPECTION >
[BOSE AUDIO WITHOUT NAVIGATION]
DIAGNOSIS AND REPAIR WORK FLOW
1.
Connect CONSULT-III and perform a self-diagnosis for “MULTI AV”. Refer to
NOTE:
Skip to step 4 of the diagnosis procedure if “MULTI AV” is not displayed.
2.
Check if any DTC is displayed in the self-diagnosis results.
Is DTC displayed?
YES
>> GO TO 3.
NO
>> GO TO 4.
3.
TROUBLE DIAGNOSIS FOR DTC
1.
Check the DTC indicated in the self-diagnosis results.
2.
Perform the relevant diagnosis referring to the DTC Index. Refer to
>> GO TO 5.
4.
TROUBLE DIAGNOSIS FOR SYMPTOMS
Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to
.
>> GO TO 5.
5.
ERROR PART REPAIR
1.
Repair or replace the identified malfunctioning parts.
2.
Perform a self-diagnosis for “MULTI AV” with CONSULT-III.
NOTE:
Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC
has been indicated in the self-diagnosis results.
3.
Check that the symptom does not occur.
Does the symptom occur?
YES
>> GO TO 1.
NO
>> INSPECTION END
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст