Nissan Murano Z51. Instruction — part 775
EXT-34
< REMOVAL AND INSTALLATION >
DOOR OUTSIDE MOLDING
DOOR OUTSIDE MOLDING
Exploded View
INFOID:0000000005516290
Removal and Installation
INFOID:0000000005516291
REMOVAL
FRONT DOOR OUTSIDE MOLDING
1.
Fully open door window.
2.
Insert a remover tool (A) into lower space.
3.
Disengage pawls of fixing front door outside molding (1) with flat
blade screw driver (B).
CAUTION:
Apply protection tape (C) around outer circumference of
front door.
1.
Front door outside molding
2.
Front door assembly
3.
Rear door outside molding
4.
Rear door assembly
: Pawl
Refer to
for symbols in the figure.
JMKIA2022ZZ
: Pawl
JMKIA2023ZZ
DOOR OUTSIDE MOLDING
EXT-35
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
4.
Twist and pull up to upper side, and then remove front door out-
side molding (1).
REAR DOOR OUTSIDE MOLDING
1.
Fully open door window.
2.
Insert a remover tool (A) into lower space.
3.
Disengage pawls of fixing rear door outside molding (1) with flat
blade screw driver (B).
CAUTION:
Apply protection tape (C) around outer circumference of
rear door.
4.
Twist and pull up to upper side, and then remove rear door out-
side molding (1).
INSTALLATION
Install in the reverse order of removal.
JMKIA2024ZZ
: Pawl
JMKIA2025ZZ
JMKIA2026ZZ
EXT-36
< REMOVAL AND INSTALLATION >
DOOR OUTSIDE LOWER MOLDING
DOOR OUTSIDE LOWER MOLDING
Exploded View
INFOID:0000000005516292
Removal and Installation
INFOID:0000000005516293
REMOVAL
FRONT DOOR OUTSIDE LOWER MOLDING
1.
Using a remover tool (A), disengage the clips from the front door
outside lower molding (1) by starting from the rear.
CAUTION:
• Apply a protective tape (B) on the door to protect the
painted surface from damage.
• Disengage the clips slowly and carefully.
• Never pull the front door outside lower molding.
2.
Remove front door outside lower molding.
REAR DOOR OUTSIDE LOWER MOLDING
1.
Front door outside lower molding
2.
Rear door outside lower molding
JMKIA2027ZZ
JMKIA1631ZZ
DOOR OUTSIDE LOWER MOLDING
EXT-37
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
1.
Using a remover tool (A), disengage the clips from the rear door
outside lower molding (1) by starting from the rear.
CAUTION:
• Apply a protective tape (B) on the door to protect the
painted surface from damage.
• Disengage the clips slowly and carefully.
• Never pull the front door outside lower molding.
2.
Remove rear door outside lower molding.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• When installing, check visually the door outside lower molding and the clips, then replace then with
new parts if they have been damaged.
• When installing door outside lower molding, check that clips are securely fitted in panel holes on
body, and then press them in.
JMKIA1632ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст