Nissan Murano Z51. Instruction — part 440
DLK-268
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY
DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY
Description
INFOID:0000000005517695
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
• Intelligent key is removed from key slot.
• All doors are closed.
Diagnosis Procedure
INFOID:0000000005517696
1.
CHECK POWER DOOR LOCK OPERATION
Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?
YES
>> GO TO 2.
NO
>> Go to
DLK-261, "ALL DOOR : Diagnosis Procedure"
.
2.
CHECK REMOTE KEYLESS ENTRY RECEIVER
Check remote keyless entry receiver.
Refer to
DLK-114, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK INTELLIGENT KEY
Check Intelligent Key.
Refer to
DLK-129, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK KEY SLOT
Check key slot.
Refer to
DLK-131, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> GO TO 1.
SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE WITH INTELLIGENT
KEY
DLK-269
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE WITH INTELLI-
GENT KEY
Description
INFOID:0000000005517697
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
• Intelligent key is removed from key slot.
• All doors are closed.
Diagnosis Procedure
INFOID:0000000005517698
1.
CHECK POWER DOOR LOCK OPERATION
Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?
YES
>> GO TO 2.
NO
>> Go to
DLK-261, "ALL DOOR : Diagnosis Procedure"
.
2.
CHECK “DOOR LOCK–UNLOCK SET” SETTING IN “WORK SUPPORT”
Check “DOOR LOCK-UNLOCK SET” setting in “WORK SUPPORT”.
Refer to
DLK-55, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK)"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “DOOR LOCK-UNLOCK SET” of “WORK SUPPORT”.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> GO TO 1.
DLK-270
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
POWER WINDOW DOWN FUNCTION DOES NOT WORK WHEN OPERATING
WITH INTELLIGENT KEY
POWER WINDOW DOWN FUNCTION DOES NOT WORK WHEN OPERAT-
ING WITH INTELLIGENT KEY
Description
INFOID:0000000005517699
NOTE:
• Before performing the diagnosis in the following procedure, check “ Work Flow”. Refer to
Diagnosis Procedure
INFOID:0000000005517700
1.
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Does door lock/unlock with Intelligent key button?
YES
>> GO TO 2.
NO
>> Go to
.
2.
CHECK POWER WINDOW OPERATION
Check power window operation.
Does power window up/down with power window main switch?
YES
>> GO TO 3.
NO
>> Go to
PWC-104, "Diagnosis Procedure"
3.
CHECK “PW DOWN SET” SETTING IN “WORK SUPPORT”
Check “PW DOWN SET” setting in “WORK SUPPORT”.
Refer to
DLK-56, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Set “PW DOWN SET” setting in “WORK SUPPORT”.
4.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> GO TO 1.
PANIC ALARM FUNCTION DOES NOT OPERATE
DLK-271
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
PANIC ALARM FUNCTION DOES NOT OPERATE
Description
INFOID:0000000005517701
NOTE:
• Before performing the diagnosis following procedure, check “Work Flow”. Refer to
.
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
CONDITIONS OF VEHICLE (OPERATION CONDITIONS)
• Ignition switch is in OFF or LOCK position.
• Intelligent Key is removed from key slot.
Diagnosis Procedure
INFOID:0000000005517702
1.
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Does door lock/unlock with Intelligent key button?
YES
>> GO TO 2.
NO
>> Go to
.
2.
CHECK VEHICLE SECURITY ALARM OPERATION
Check vehicle security alarm operation.
Does alarm (headlamp and horn) active?
YES
>> GO TO 3.
NO
>> Go to
.
3.
CHECK “PANIC ALARM SET” SETTING IN “WORK SUPPORT”
Check “PANIC ALARM SET” setting in “WORK SUPPORT”.
Refer to
DLK-56, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Set “PANIC ALARM SET” setting in “WORK SUPPORT”.
4.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> GO TO 1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст