Nissan Silvia. Instruction — part 108
JBT102A
GI
MA
EM
LC
EC
FE
CL
MT
AT
PD
AX
SU
BR
ST
RS
HA
SC
EL
IDX
INSTRUMENT PANEL ASSEMBLY
Removal and Installation (Cont’d)
BT-23
SBT103A
JBT104A
A/T console finisher and cluster lid C
1.
Insert a flat-bladed screwdriver with a cloth wrapped around it
into the cut-out to remove the rear metal clip.
2.
While holding down the rear part of cluster lid C, grasp the rear
part of the A/T console finisher and lift up to remove.
JBT105A
3.
Remove screws.
4.
First remove the lower metal clip, then the upper metal clip.
Then remove cluster lid C.
CAUTION:
Be careful not to trap the harness when attaching cluster lid
C.
INSTRUMENT PANEL ASSEMBLY
Removal and Installation (Cont’d)
BT-24
JBT106A
Defroster grille
Insert a flat-bladed screwdriver (or similar tool) with a cloth
wrapped around it into the front defroster grille to remove the
pawls.
GI
MA
EM
LC
EC
FE
CL
MT
AT
PD
AX
SU
BR
ST
RS
HA
SC
EL
IDX
INSTRUMENT PANEL ASSEMBLY
Removal and Installation (Cont’d)
BT-25
Removal and Installation
NMBT0013
CAUTION:
I
Wrap the tip of flat-bladed screwdriver with a cloth when removing metal clips from garnishes.
1. Remove front and rear seats. Refer to “FRONT SEAT” and “REAR SEAT” for details, BT-38 and BT-39.
2. Remove front and rear seat belts. Refer to RS-4 and RS-5, “Front Seat Belt” and “Rear Seat Belt” for
details.
3. Remove kicking plates.
4. Remove body side welts.
5. Remove dash side finishers.
6. Remove front pillar garnishes.
7. Remove rear side finishers.
8. Remove high-mounted stop lamp.
9. Remove rear parcel shelf finisher.
10. Remove seatback center and side finishers.
11. Remove rear pillar finishers.
12. Remove foot rest.
13. Remove accelerator pedal stopper.
14. Remove carpet hook.
15. Remove floor carpet.
JBT107A
SIDE AND FLOOR TRIM
Removal and Installation
BT-26
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст