Nissan Silvia. Instruction — part 316
Available Side Bearing Adjusting Washers
NMPD0042S08
Thickness
mm (in)
Part number
2.00 (0.0787)
2.05 (0.0807)
2.10 (0.0827)
2.15 (0.0846)
2.20 (0.0866)
2.25 (0.0886)
2.30 (0.0906)
2.35 (0.0925)
2.40 (0.0945)
2.45 (0.0965)
2.50 (0.0984)
2.55 (0.1004)
2.60 (0.1024)
2.65 (0.1043)
38453-N3100
38453-N3101
38453-N3102
38453-N3103
38453-N3104
38453-N3105
38453-N3106
38453-N3107
38453-N3108
38453-N3109
38453-N3110
38453-N3111
38453-N3112
38453-N3113
Drive Pinion Height Adjustment
NMPD0042S06
Available pin-
ion height
adjust washers
Thickness mm (in)
Part number*
3.09 (0.1217)
3.12 (0.1228)
3.15 (0.1240)
3.18 (0.1252)
3.21 (0.1264)
3.24 (0.1276)
3.27 (0.1287)
3.30 (0.1299)
3.33 (0.1311)
3.36 (0.1323)
3.39 (0.1335)
3.42 (0.1346)
3.45 (0.1358)
3.48 (0.1370)
3.51 (0.1382)
3.54 (0.1394)
3.57 (0.1406)
3.60 (0.1417)
3.63 (0.1429)
3.66 (0.1441)
38154-P6017
38154-P6018
38154-P6019
38154-P6020
38154-P6021
38154-P6022
38154-P6023
38154-P6024
38154-P6025
38154-P6026
38154-P6027
38154-P6028
38154-P6029
38154-P6030
38154-P6031
38154-P6032
38154-P6033
38154-P6034
38154-P6035
38154-P6036
*: Always check with the Parts Department for the latest parts information.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
REAR FINAL DRIVE
R200
Service Data and Specifications (SDS) (Cont’d)
PD-33
Drive Pinion Preload Adjustment
NMPD0042S07
Drive pinion bearing preload adjusting method
Adjusting washer and spacer
Drive pinion preload without front oil seal
N·m (kg-cm, in-lb)
1.1 - 1.4 (11 - 14, 9.5 - 12.2)
Available front
drive pinion
bearing adjust-
ing washer
Thickness mm (in)
Part number*
3.80 - 3.82 (0.1496 - 0.1504)
3.82 - 3.84 (0.1504 - 0.1512)
3.84 - 3.86 (0.1512 - 0.1520)
3.86 - 3.88 (0.1520 - 0.1528)
3.88 - 3.90 (0.1528 - 0.1535)
3.90 - 3.92 (0.1535 - 0.1543)
3.92 - 3.94 (0.1543 - 0.1551)
3.94 - 3.96 (0.1551 - 0.1559)
3.96 - 3.98 (0.1559 - 0.1567)
3.98 - 4.00 (0.1567 - 0.1575)
4.00 - 4.02 (0.1575 - 0.1583)
4.02 - 4.04 (0.1583 - 0.1591)
4.04 - 4.06 (0.1591 - 0.1598)
4.06 - 4.08 (0.1598 - 0.1606)
4.08 - 4.10 (0.1606 - 0.1614)
38125-61001
38126-61001
38127-61001
38128-61001
38129-61001
38130-61001
38131-61001
38132-61001
38133-61001
38134-61001
38135-61001
38136-61001
38137-61001
38138-61001
38139-61001
Available drive
pinion bearing
adjusting spac-
ers
Length
mm (in)
Part number*
46.5 (1.831)
46.8 (1.843)
45.6 (1.795)
46.2 (1.819)
38165-10V00
38165-10V01
38165-10V05
38165-10V06
38165-10V07
*: Always check with the Parts Department for the latest parts information.
REAR FINAL DRIVE
R200
Service Data and Specifications (SDS) (Cont’d)
PD-34
RESTRAINT SYSTEM
CONTENTS
SEAT BELTS . . . . . . . . . . . . . . . . ...2
Precautions . . . . . . . . . . . . . . . . ..2
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
. . . . . . . . . . . . . . . . .2
PRECAUTION FOR SEAT BELT SERVICE
. . . . ..2
Maintenance . . . . . . . . . . . . . . . . 3
Front Seat Belt. . . . . . . . . . . . . . . .4
. . . . . . . . .4
Rear Seat Belt . . . . . . . . . . . . . . . .5
. . . . . . . . .5
Tether Anchor Plate . . . . . . . . . . . . . .6
. . . . . . . . .6
SUPPLEMENTAL RESTRAINT SYSTEM (SRS) . . ...7
Precautions . . . . . . . . . . . . . . . . ..7
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
. . . . . . . . . . . . . . . . .7
. . . . . . .7
WIRING DIAGRAMS AND TROUBLE DIAGNOSIS
. ...7
Preparation . . . . . . . . . . . . . . . . ..8
. . . . . . . . . . 8
. . . . . . . . ..8
SRS Configuration . . . . . . . . . . . . . ...9
SRS Component Parts Location . . . . . . . . .9
Maintenance Items . . . . . . . . . . . . . 10
Diagnosis Sensor Unit . . . . . . . . . . . ...10
. . . . . . . ...10
Driver Air Bag Module and Spiral Cable . . . . ...12
. . . . . . . ...12
. . . . . . . . . . . . . . . ...12
. . . . . . . . . . . . . . 13
Front Passenger Air Bag Module . . . . . . . ..14
. . . . . . . . . . . . . . . ...14
. . . . . . . . . . . . . . 15
Disposal of Air Bag Module . . . . . . . . . ...16
. . . . . . . .16
DEPLOYMENT PROCEDURES FOR AIR BAG
MODULE (OUTSIDE OF VEHICLE)
DEPLOYMENT OF AIR BAG MODULE WHILE
MOUNTED IN VEHICLE
. . . . . . . . . . ...19
. . . . . . ..20
Trouble Diagnoses Introduction. . . . . . . . .21
. . . . . . . . . . ...21
. . . . . ...21
HOW TO CHANGE SELF-DIAGNOSIS MODE
. . . . . . . . . . . . ...22
HOW TO CHANGE SELF-DIAGNOSIS MODE
. . . . . . . . . . . 22
HOW TO ERASE SELF-DIAGNOSIS RESULTS
. . .22
How to Perform Trouble Diagnoses for Quick
and Accurate Repair . . . . . . . . . . . . ..24
. . . . . . ..24
. . . . . . . . . . . 24
. . . . . . . . . . . . . . ..25
Wiring Diagram - SRS -. . . . . . . . . . . .26
SRS Operation Check . . . . . . . . . . . ...28
. . . . . . . . ..28
Trouble Diagnoses with CONSULT-II. . . . ...29
. . . . . . . . ..29
. . . . . . . . ..31
DIAGNOSTIC PROCEDURE 4 (CONTINUED
FROM DIAGNOSTIC PROCEDURE 2)
. . . . . ..33
. . . . . . . . ..33
Trouble Diagnoses without CONSULT-II. . . ..36
. . . . . . . . ..36
. . . . . . . . ..38
DIAGNOSTIC PROCEDURE 8 (CONTINUED
FROM DIAGNOSTIC PROCEDURE 6)
. . . . . ..40
Does Not Turn Off . . . . . . . . . . . . . .41
. . . . . . . . ..41
Does Not Turn On . . . . . . . . . . . . . .43
. . . . . . . . 43
Trouble Diagnoses: SRS Does Not Enter
Diagnosis Mode Using Door Switch. . . . . . ..44
. . . . . . . . 44
Collision Diagnosis . . . . . . . . . . . . . 46
. . . . . . . . . . . . ...46
GI
MA
EM
LC
EC
FE
CL
MT
AT
PD
AX
SU
BR
ST
BT
HA
SC
EL
IDX
Precautions
SUPPLEMENTAL RESTRAINT SYSTEM (SRS) “AIR BAG”
NMRS0001
The Supplemental Restraint System such as “AIR BAG” used along with a seat belt, helps to reduce the risk
or severity of injury to the driver and front passenger for certain types of collision. The SRS composition which
is available to NISSAN MODEL S15 is as follows:
The Supplemental Restraint System consists of driver air bag module (located in the center of the steering
wheel), front passenger air bag module (located on the instrument panel on passenger side), a diagnosis
sensor unit, warning lamp, wiring harness and spiral cable.
WARNING:
I
To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance should be per-
formed by an authorized NISSAN dealer.
I
Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system.
I
Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Instruction. SRS wiring harnesses can be identified with yellow harness connector.
PRECAUTION FOR SEAT BELT SERVICE
NMRS0002
CAUTION:
I
Do not use disassemble buckle or seat belt assembly.
I
Replace anchor bolts if they are deformed or worn out.
I
Never oil tongue and buckle.
I
If any component of seat belt assembly is questionable, do not repair. Replace the whole seat belt
assembly.
I
If webbing is cut, frayed, or damaged, replace seat belt assembly.
I
When replacing seat belt assembly, use a genuine seat belt assembly.
After A Collision
NMRS0002S01
WARNING:
Inspect all seat belt assemblies including retractors and attaching hardware after any collision.
NISSAN recommends that all seat belt assemblies in use during a collision be replaced unless the
collision was minor and the belts show no damage and continue to operate properly. Failure to do so
could result in serious personal injury in an accident. Seat belt assemblies not in use during a colli-
sion should also be replaced if either damage or improper operation is noted. Seat belt pre-tensioner
should be replaced even if the seat belts are not in use during a frontal collision in which the air bags
are deployed.
Replace any seat belt assembly (including anchor bolts) if:
I
The seat belt was in use at the time of a collision (except for minor collisions and the belts, retractors and
buckles show no damage and continue to operate properly).
I
The seat belt was damaged in an accident. (i.e. torn webbing, bent retractor or guide, etc.)
I
The seat belt attaching point was damaged in an accident. Inspect the seat belt attaching area for dam-
age or distortion and repair as necessary before installing a new seat belt assembly.
I
Anchor bolts are deformed or worn out.
I
The seat belt pre-tensioner should be replaced even if the seat belts are not in use during the collision in
which the air bags are deployed.
SEAT BELTS
Precautions
RS-2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст