Nissan Silvia. Instruction — part 322
A current Self-diagnosis result is displayed on the CONSULT-II screen in real time.
After the malfunction is repaired completely, no malfunction is detected on “SELF-DIAG [CURRENT]”.
I
“SELF-DIAG [PAST]”
Return to the “SELF-DIAG [CURRENT]” CONSULT-II screen by pushing “BACK” key of CONSULT-II and
select “SELF-DIAG [CURRENT]” in SELECT DIAG MODE. Touch “ERASE” in “SELF-DIAG [CURRENT]”
mode.
NOTE:
If the memory of the malfunction in “SELF-DIAG [PAST]” is not erased, the User mode shows the sys-
tem malfunction by the operation of the warning lamp even if the malfunction is repaired completely.
SRS701
I
“TROUBLE DIAG RECORD”
The memory of “TROUBLE DIAG RECORD” cannot be erased.
Without CONSULT-II
NMRS0023S0502
After a malfunction is repaired, switch the ignition “OFF” for at least one second, then back “ON”. Diagnosis
mode returns to the User mode. At that time, the self-diagnostic result is cleared.
GI
MA
EM
LC
EC
FE
CL
MT
AT
PD
AX
SU
BR
ST
BT
HA
SC
EL
IDX
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Trouble Diagnoses Introduction (Cont’d)
RS-23
How to Perform Trouble Diagnoses for Quick
and Accurate Repair
=NMRS0024
A good understanding of the malfunction conditions can make troubleshooting faster and more accurate.
In general, each customer feels differently about a malfunction. It is important to fully understand the symp-
toms or conditions for a customer complaint.
INFORMATION FROM CUSTOMER
NMRS0024S01
WHAT . . Vehicle model
WHEN . . Date, Frequencies
WHERE . . Road conditions
HOW . . Operating conditions, Symptoms
PRELIMINARY CHECK
NMRS0024S02
Check that the following parts are in good order.
I
Battery [Refer to SC-3, “BATTERY”.]
I
Fuse [Refer to EL-14, “Fuse”, “POWER SUPPLY ROUTING”.]
I
System component-to-harness connections
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
How to Perform Trouble Diagnoses for Quick and Accurate Repair
RS-24
WORK FLOW
NMRS0024S03
SRS926
GI
MA
EM
LC
EC
FE
CL
MT
AT
PD
AX
SU
BR
ST
BT
HA
SC
EL
IDX
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
How to Perform Trouble Diagnoses for Quick and Accurate Repair (Cont’d)
RS-25
Wiring Diagram — SRS —
NMRS0026
TRS118
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Wiring Diagram — SRS —
RS-26
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст