Nissan Terrano r20e. Instruction — part 88
YCL022
CLUTCH SYSTEM
CL-3
Clutch Pedal
NCL045
CLUTCH SYSTEM
CL-4
Adjusting Clutch Pedal
1. Adjust pedal height with pedal stopper.
Pedal height “H”:
LHD: 227 - 237 mm (8.94 - 9.33 in)
RHD: 210 - 220 mm (8.27 - 8.66 in)
2. Adjust pedal free play with master cylinder push rod. Then
tighten lock nut.
Pedal free play “A”:
1.0 - 3.0 mm (0.039 - 0.118 in)
YCL009
INSPECTION AND ADJUSTMENT
CL-5
Bleeding Procedure
1. Bleed air from clutch operating cylinder according to the follow-
ing procedure.
Carefully monitor fluid level at master cylinder during bleeding
operation.
a. Top up reservoir with recommended brake fluid.
b. Connect a transparent vinyl tube to air bleeder valve of clutch
damper.
c. Fully depress clutch pedal several times.
d. With clutch pedal depressed, open bleeder valve to release air.
e. Close bleeder valve.
f.
Repeat steps (c) through (e) above until brake fluid flows from
air bleeder valve without air bubbles.
2. Bleed air from clutch operating cylinder according to the above
procedure.
3. Repeat the above bleeding procedures 1 and 2 several times.
NCL025
INSPECTION AND ADJUSTMENT
CL-6
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст