Nissan Terrano r20e. Instruction — part 228
RHD MODELS
YEL111D
WIPER AND WASHER
Wiring Diagram — WIPER — (Cont’d)
EL-95
Wiring Diagram — WIP/R —
LHD MODELS
YEL112D
WIPER AND WASHER
EL-96
RHD MODELS
YEL113D
WIPER AND WASHER
Wiring Diagram — WIP/R — (Cont’d)
EL-97
Installation
1. Prior to wiper arm installation, turn on wiper switch to operate
wiper motor and then turn it “OFF” (Auto Stop).
2. Lift the blade up and then set it down onto glass surface to set
the blade center to clearance “C” or “D” immediately before
tightening nut.
3. Eject washer fluid. Turn on wiper switch to operate wiper motor
and then turn it “OFF”.
4. Ensure that wiper blades stop within clearance “C” or “D”.
Clearance “C”: 25 - 35 mm (0.98 - 1.38 in)
Clearance “D”: 25 - 35 mm (1.0 - 1.4 in)
I
Tighten windshield wiper arm nuts to specified torque.
Front wiper:
: 20 - 30 N
⋅
m (2.1 - 3.0 kg-m, 15 - 22 ft-lb)
Rear wiper:
: 11.0 - 16.0 N
⋅
m
(1.12 - 1.63 kg-m, 8.1 - 11.8 ft-lb)
YEL077
NEL628
WIPER AND WASHER
EL-98
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст