Nissan Terrano r20e. Instruction — part 337
IDENTIFICATION PLATE
ENGINE SERIAL NUMBER
AUTOMATIC TRANSMISSION NUMBER
MANUAL TRANSMISSION NUMBER
NGI011
NGI012
SGI137A
SGI760-A
NGI014
IDENTIFICATION INFORMATION
Identification Number (Cont’d)
GI-30
Dimensions
Unit: mm (in)
Hardtop
Wagon
Overall length
4,242 (167.0)
4,722 (185.9)
Overall width (*)
1,755 (69.1)
1,755 (69.1)
Overall height
1,805 (71.1)
1,810 (71.3)
Front tread
1,455 (57.3)
1,455 (57.3)
Rear tread
1,430 (56.3)
1,430 (56.3)
Wheelbase
2,450 (96.5)
2,650 (104.3)
Ground clearance
210 (8.3)
205 (8.1)
Front overhang
837 (33.0)
837 (33.0)
Rear overhang
bumper
835 (32.9)
1,115 (43.9)
spare wheel
955 (37.6)
1,235 (48.6)
(*): without mirrors
Wheels and Tires
Road wheel size
16 x 7J
Offset
[mm (in)]
25 (0.98)
Tire size
235/70 R16
IDENTIFICATION INFORMATION
GI-31
Garage Jack and Safety Stand
WARNING:
I
Never get under the vehicle while it is supported only by
the jack. Always use safety stands when you have to get
under the vehicle.
I
Place wheel chocks at both front and back of the wheels
on the ground, and apply handbrake where appropriate.
I
Do not start the engine while the vehicle is supported only
by the jack.
Screw Jack
EGI016
EGI017
LIFTING POINTS AND TOW TRUCK TOWING
GI-32
4-pole Lift
WARNING:
Do not use a 2-pole lift.
Due to weight balance of the vehicle and shape of underbody,
lift arms can not be attached in a safe way. Therefore it is rec-
ommended to use a 4-pole lift only.
Tow Truck Towing
CAUTION:
I
All applicable local laws regarding the towing operation
must be obeyed.
I
It is necessary to use proper towing equipment to avoid
possible damage to the vehicle during a towing operation.
I
Attach safety chains for all towing.
I
When towing, make sure that the transmission, steering
system and power train are in good order. If any unit is
damaged, a dolly must be used.
I
When towing with the front wheels on the ground:
Move both the gearshift and transfer levers to neutral (“N”
position).
Turn the ignition key to the “OFF” position and secure the
steering wheel in a straightahead position with a rope or
similar device. Never place the ignition key in the “LOCK”
position. This will result in damage to the steering lock
mechanism.
I
When towing with the rear wheels on the ground, release
the parking brake and move both the gearshift and trans-
fer levers to neutral (“N” position).
I
Never tow vehicle from the rear (i.e., backward) with four
wheels on the ground as this may cause serious and
expensive damage to the transmission.
LIFTING POINTS AND TOW TRUCK TOWING
GI-33
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст