Nissan Terrano r20e. Instruction — part 431
Disassembly and Assembly
L.H.D., R.H.D.
I
When disassembling and assembling, unlock steering lock with
key.
I
Install snap ring on upper shaft with box wrench.
YST018
NST007
SST628A
STEERING WHEEL AND STEERING COLUMN
ST-10
I
After installing steering column, check tilt mechanism opera-
tion.
L
1
: 8 - 12 mm (0.32 - 0.47 in)
L
2
: 18 - 22 mm (0.71 - 0.87 in)
I
Steering lock
a. Break self-shear type screws with a drill or other appropriate
tool.
b. Install self-shear type screws until self-shear type screw heads
are cut off.
I
When disassembling and assembling, unlock steering lock with
key.
I
Ensure that rounded surface of snap ring faces towards bear-
ing when snap ring is installed.
Inspection
I
When steering wheel can not be rotated smoothly, check the
steering column for the following matters and replace damaged
parts:
a. Check column bearings for damage or unevenness. Lubricate
with recommended multi-purpose grease or replace steering
column as an assembly, if necessary.
b. Check jacket tube for deformation or breakage. Replace if nec-
essary.
I
When the vehicle is involved in a light collision, check column
length “L”. If it is not within specifications, replace steering col-
umn assembly “L
1
”.
Column length:
“L
1
”: 830.5 - 832.7 mm (32.697 - 32.783 in)
EST006
SST300A
SST301A
EST007
STEERING WHEEL AND STEERING COLUMN
Disassembly and Assembly (Cont’d)
ST-11
Description
NST028
POWER STEERING GEAR
ST-12
YST021
POWER STEERING GEAR
Description (Cont’d)
ST-13
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст