Nissan Pathfinder (2007 year). Instruction — part 228
COWL TOP
EI-17
C
D
E
F
G
H
J
K
L
M
A
B
EI
2007 Pathfinder
COWL TOP
PFP:66100
Removal and Installation
EIS007TU
REMOVAL
1.
Remove the front wiper arms. Refer to
.
2.
Remove cowl top seal.
3.
Release clips and remove LH and RH cowl top extensions.
4.
Disconnect washer tubes from washer nozzles.
5.
Remove cowl top clips and remove cowl top from the cowl.
INSTALLATION
Installation is in the reverse order of removal.
1.
Cowl top extension RH
2.
Clips
3.
Cowl top
4.
Washer nozzle screws
5.
Grommet
6.
Cowl top seal
7.
Cowl top extension LH
LIIA1761E
EI-18
FRONT FENDER
2007 Pathfinder
FRONT FENDER
PFP:63100
Removal and Installation
EIS007TV
REMOVAL
1.
Remove headlamp assembly. Refer to
LT-25, "Removal and Installation"
2.
Remove front fender protector. Refer to
3.
Remove front bumper. Refer to
EI-14, "Removal and Installation"
4.
Remove front fender bolts from hoodledge and dash panel.
5.
Remove front fender bolts from rocker panel and radiator core support member.
6.
Remove front fender.
INSTALLATION
Installation is in the reverse order of removal.
LIIA1752E
LICENSE LAMP FINISHER
EI-19
C
D
E
F
G
H
J
K
L
M
A
B
EI
2007 Pathfinder
LICENSE LAMP FINISHER
PFP:84810
Removal and Installation
EIS007TW
REMOVAL
1.
Remove back door finisher. Refer to
2.
Remove nuts and license lamp finisher.
INSTALLATION
Installation is in the reverse order of removal.
1.
Back door
2.
Nut
3.
License lamp finisher
LIIA1781E
EI-20
FENDER PROTECTOR
2007 Pathfinder
FENDER PROTECTOR
PFP:63840
Components
EIS007TX
Front Fender Protector
Rear Fender Protector
WIIA1078E
1.
Fender protector LH
2.
Nut
3.
Clip C205
4.
Grommet
⇐
Vehicle front
LIIA1764E
1.
Fender protector RH
2.
Clips
3.
Nuts
4.
Fender protector LH
FENDER PROTECTOR
EI-21
C
D
E
F
G
H
J
K
L
M
A
B
EI
2007 Pathfinder
Removal and Installation of Front Fender Protector
EIS007TY
REMOVAL
1.
Remove screws.
2.
Remove plastic clips.
3.
Remove pushpins.
4.
Remove front fender protector.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation of Rear Fender Protector
EIS007TZ
REMOVAL
1.
Remove screws.
2.
Remove plastic clips.
3.
Remove pushpins.
4.
Remove rear fender protector.
INSTALLATION
Installation is in the reverse order of removal.
EI-22
RUNNING BOARDS
2007 Pathfinder
RUNNING BOARDS
PFP:96110
Removal and Installation
EIS007U0
REMOVAL
1.
Remove mud flaps (if equipped).
2.
Remove bolts and remove running board from running board brackets.
3.
Remove nuts and remove running board brackets from chassis.
4.
Remove screw and clip and remove wind deflector.
INSTALLATION
Installation is in the reverse order of removal.
1.
Front mud flap (if equipped)
2.
Running board
3.
Rear wheel wind deflector
4.
Rear mud flap (if equipped)
5.
Running board bracket
LIIA1779E
ROOF RACK
EI-23
C
D
E
F
G
H
J
K
L
M
A
B
EI
2007 Pathfinder
ROOF RACK
PFP:73155
Removal and Installation
EIS007U1
REMOVAL
1.
Pry outward releasing the clips and remove the slide rail cover front LH and RH.
2.
Pry outward releasing the clips and remove the slide rail cover rear LH and RH.
3.
Remove the bolts and remove front and rear sliding crossbars from slide rails.
4.
Remove the bolts from the slide rails LH and RH.
5.
Shift the slide rails forward to disengage from center stanchion and remove from roof.
6.
Remove the bolts and remove center stansions LH and RH from roof.
INSTALLATION
Installation is in the reverse order of removal.
1.
Slide rail
2.
Sliding crossbar
3.
Slide rail cover rear
4.
Center stanchion
5.
Slide rail cover front
LIIA1776E
EI-24
DOOR OUTSIDE MOLDING
2007 Pathfinder
DOOR OUTSIDE MOLDING
PFP:82820
Removal and Installation
EIS007U2
FRONT DOOR OUTSIDE MOLDING
Removal
1.
Open the window fully.
2.
Remove the door mirror. Refer to
.
3.
Lift molding from the front side off of flange.
4.
Remove the front door outside molding.
Installation
Installation is in the reverse order of removal.
LIIA1780E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст