Nissan Pathfinder (2007 year). Instruction — part 42
ASSEMBLY
AT-307
D
E
F
G
H
I
J
K
L
M
A
B
AT
2007 Pathfinder
43. Install needle bearing (rear side) to mid carrier assembly.
CAUTION:
Apply petroleum jelly to needle bearing.
44. Install needle bearing (front side) to mid carrier assembly.
CAUTION:
Apply petroleum jelly to needle bearing.
45. Install mid carrier assembly in rear carrier assembly.
46. Install front carrier assembly, input clutch assembly and rear
internal gear as a unit.
47. Install seal rings in input clutch assembly.
CAUTION:
●
Do not reuse seal rings.
●
Apply petroleum jelly to seal rings.
SCIA2804E
SCIA2805E
SCIA5017E
SCIA5015E
SCIA2470E
AT-308
ASSEMBLY
2007 Pathfinder
48. Install band servo anchor end pin and lock nut in transmission
case.
CAUTION:
Do not reuse band servo anchor end pin.
49. Install brake band in transmission case.
CAUTION:
Install it so that the identification to avoid incorrect installa-
tion faces the servo side.
50. Install front sun gear to front carrier assembly.
CAUTION:
Apply ATF to front sun gear bearing and 3rd one-way clutch
end bearing.
51. Install needle bearing to front sun gear.
CAUTION:
Apply petroleum jelly to needle bearing.
52. Adjust brake band tilting using a clip so that brake band contacts
front sun gear drum evenly.
SCIA6512E
SCIA5498E
SCIA5014E
SCIA2808E
SCIA5033E
ASSEMBLY
AT-309
D
E
F
G
H
I
J
K
L
M
A
B
AT
2007 Pathfinder
53. Adjust brake band.
a.
Loosen lock nut.
b.
Tighten band servo anchor end pin to specified torque.
c.
Back off band servo anchor end pin three turns.
d.
Holding band servo anchor end pin, tighten lock nut to specified
torque.
Adjustment
ECS00EMA
TOTAL END PLAY
●
Measure clearance between front sun gear and bearing race for
oil pump cover.
●
Select proper thickness of bearing race so that end play is within
specifications.
1.
Measure dimensions “K” and “L” and then calculate dimension
“J”.
a.
Measure dimension “K”.
Anchor end pin
: 5.0 N·m (0.51 kg-m, 44 in-lb)
Lock nut
: 46 N·m (4.7 kg-m, 34 ft-lb)
SCIA5498E
SCIA2810E
SCIA5350E
SCIA5351E
AT-310
ASSEMBLY
2007 Pathfinder
b.
Measure dimension “L”.
c.
Calculate dimension “J”.
2.
Measure dimensions “M
1
” and “M
2
” and then calculate dimen-
sion “M”.
a.
Place bearing race and needle bearing on oil pump assembly.
b.
Measure dimension “M
1
”.
c.
Measure dimension “M
2
”.
“J”: Distance between oil pump fitting surface of
transmission case and needle bearing mating surface
of front sun gear.
J = K – L
SCIA5352E
SCIA3125E
SCIA3124E
SCIA3126E
SCIA3127E
ASSEMBLY
AT-311
D
E
F
G
H
I
J
K
L
M
A
B
AT
2007 Pathfinder
d.
Calculate dimension “M”.
3.
Adjust total end play “T
1
”.
●
Select proper thickness of bearing race so that total end play
is within specifications.
Assembly (2)
ECS00EMB
1.
Install O-ring to oil pump assembly.
CAUTION:
●
Do not reuse O-ring.
●
Apply ATF to O-ring.
2.
Install bearing race to oil pump assembly.
CAUTION:
Apply petroleum jelly to bearing race.
“M”: Distance between transmission case fitting sur-
face of oil pump and needle bearing on oil pump.
M = M
1
– M
2
SCIA3125E
T
1
= J – M
Total end play “T
1
”
: 0.25 - 0.55 mm (0.0098 - 0.0217 in)
Bearing races
:Refer to
SCIA2810E
SCIA5172E
SCIA6529E
AT-312
ASSEMBLY
2007 Pathfinder
3.
Install oil pump assembly in transmission case.
CAUTION:
Apply ATF to oil pump bearing.
4.
Apply recommended sealant (Genuine RTV Silicone Sealant or
equivalent. Refer to
GI-47, "Recommended Chemical Products
.) to oil pump assembly as shown.
CAUTION:
Completely remove all moisture, oil, old sealant and any
foreign material from the oil pump bolts and oil pump bolt
mating surfaces.
5.
Tighten oil pump bolts to specified torque.
CAUTION:
Apply ATF to oil pump bushing.
6.
Install O-ring to input clutch assembly.
CAUTION:
●
Do not reuse O-ring.
●
Apply ATF to O-ring.
7.
Install converter housing to transmission case and tighten bolts
to specified torque.
CAUTION:
Do not reuse self-sealing bolt (A).
SCIA2811E
SCIA5321E
Oil pump bolts
: 48 N·m (4.9 kg-m, 35 ft-lb)
SCIA2300E
SCIA5011E
Converter housing bolt
: 52 N·m (5.3 kg-m, 38 ft-lb)
Self-sealing bolt (A)
: 61 N·m (6.2 kg-m, 45 ft-lb)
WCIA0662E
ASSEMBLY
AT-313
D
E
F
G
H
I
J
K
L
M
A
B
AT
2007 Pathfinder
8.
Make sure that brake band does not close turbine revolution
sensor hole.
9.
Install control valve with TCM.
a.
Connect TCM connector and park/neutral position switch con-
nector.
b.
Install A/T assembly harness connector to control valve with
TCM.
c.
Connect TCM connectors.
SCIA5034E
SCIA5449E
SCIA5450E
SCIA5447E
AT-314
ASSEMBLY
2007 Pathfinder
d.
Install O-ring to A/T assembly harness connector.
CAUTION:
●
Do not reuse O-ring.
●
Apply ATF to O-ring.
e.
Install A/T fluid temperature sensor 2 to bracket.
f.
Install A/T fluid temperature sensor 2 (with bracket) to control
valve with TCM and tighten bolt to specified torque.
CAUTION:
Adjust bolt hole of bracket to bolt hole of control valve.
g.
Install control valve with TCM in transmission case.
CAUTION:
●
Make sure that turbine revolution sensor is securely
installed into turbine revolution sensor hole.
●
Hang down revolution sensor harness toward outside so
as not to disturb installation of control valve with TCM.
●
Adjust A/T assembly harness connector of control valve
with TCM to terminal hole of transmission case.
●
Assemble it so that instruction valve cutout is engaged with
instruction plate projection.
SCIA5155E
SCIA5264E
Bracket bolt
: 7.9 N·m (0.81 kg-m, 70 in-lb)
SCIA5301E
SCIA5034E
SCIA5035E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст