Nissan Primera P11. Instruction — part 59
YBT014
Metal clip
Garnish
Metal clip
Metal clip
Metal clip
Metal clip
Metal clip
Metal clip
Metal clip
Metal clip
Metal clip
Metal clip
Metal clip
INTERIOR TRIM
Side and Floor Trim (Cont’d)
BT-21
REMOVAL — Body side trim
Wagon
●
Remove parcel shelf before removing body side trim.
p
1
Remove front and rear seats. Refer to “SEAT” for details, BT-40.
p
2
Remove front and rear kicking plates.
p
3
Remove dash side lower finishers.
p
4
Remove front and rear body side welts.
p
5
Remove front pillar garnishes.
p
6
Remove center pillar lower garnishes.
p
7
Remove front seat belt shoulder adjustment anchor bolt covers and anchor bolts (Refer to “SEAT BELTS”
in RS section for anchor bolt details).
p
8
Remove center pillar upper garnishes.
p
9
Remove luggage room side center finisher.
p
10
Remove luggage room side upper finisher.
p
11
Remove luggage room rear plate.
p
12
Remove luggage room rear finisher.
p
13
Remove luggage room side lower finisher.
NBF273
Metal clip
Metal clips
Metal clip
Guard net hook
Metal clip
Metal clip
Metal clip
Metal clip
Clip
.
Clip
: Metal clips
INTERIOR TRIM
Side and Floor Trim (Cont’d)
BT-22
NBF272
Metal clip
Garnish
Metal clip
Metal clip
Metal clip
Metal clip
Metal clip
Metal clip
Metal clip
Metal clip
12.7 - 15.7 N·m
(1.30 - 1.60 kg-m,
9.4 - 11.6 ft-lb)
INTERIOR TRIM
Side and Floor Trim (Cont’d)
BT-23
Door Trim
REMOVAL — Door trim
p
1
Remove pull handle.
p
2
Remove power window switch assembly and disconnect the connector (Power window models).
p
3
Remove window regulator handle (Instruction window models).
p
4
Remove bolts, screws and clips
C101
securing door finisher.
p
5
Lift out door finisher.
YBT015
clips
Metal clip
Hook
Instruction window regulator handle
Removal
Push
Flat-bladed
screwdriver
Squeeze the regulator handle clip in place with a screwdriver
and remove the regulator handle from the regulator shaft.
Set the regulator handle clip as shown in figure
p
1
.
Installation
Front
Push the regulator handle to install it into the regulator shaft.
Install the regulator handle in place as shown in the figure with
the window completely closed.
SEC. 251
⋅
267
⋅
809
⋅
828
INTERIOR TRIM
BT-24
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст