Nissan Primera P11. Instruction — part 265

EXCEPT MT MODELS WITH ABS AFTER VIN - P11U0548750

YEC092A

DTC P0500 VEHICLE SPEED SENSOR (VSS)

SR20DE

Wiring Diagram (Cont’d)

EC-259

Diagnostic Procedure

NCEC0278

MODELS BEFORE VIN - P11U0548750

1

CHECK INPUT SIGNAL CIRCUIT

1. Turn ignition switch “OFF”.
2. Disconnect ECM harness connector and combination meter harness connector.
3. Check harness continuity between ECM terminal 86 and meter terminal 9.

Refer to wiring diagram.

Continuity should exist.

4. Also check harness for short to ground and short to power.

OK or NG

OK

©

GO TO 3.

NG

©

GO TO 2.

2

DETECT MALFUNCTIONING PART

Check the following.

I

Harness connectors F104, M50 (CVT: F115, M81)

I

Harness for open or short between ECM and combination meter

©

Repair open circuit or short to ground or short to power in harness or connectors.
Check Audio circuit and other linked circuit for short to ground or short to power power.
Refer to EL section.

3

CHECK SPEEDOMETER FUNCTION

Make sure that speedometer functions properly.

OK or NG

OK

©

GO TO 5.

NG

©

GO TO 4.

4

DETECT MALFUNCTIONING PART

Check the following.

I

Harness connectors M50, F104 and M52, F103 (CVT: M81, F115 and M80, F114)

I

Harness for open or short between combination meter and vehicle speed sensor

©

Repair harness or connectors. Check vehicle speed sensor and its circuit. Refer to EL
section.

5

CHECK INTERMITTENT INCIDENT

Check combination meter internal circuit for short to ground or short to power. Refer to EL section.
Perform “TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT”, EC-SR-114.

©

INSPECTION END

DTC P0500 VEHICLE SPEED SENSOR (VSS)

SR20DE

Diagnostic Procedure

EC-260

MT MODELS WITH ABS AFTER VIN - P11U0548750

1

CHECK INPUT SIGNAL CIRCUIT

1. Turn ignition switch “OFF”.
2. Disconnect ECM harness connector and combination meter harness connector.
3. Check harness continuity between ECM terminal 86 and meter terminal 4.

Refer to wiring diagram.

Continuity should exist.

4. Also check harness for short to ground and short to power.

OK or NG

OK

©

GO TO 3.

NG

©

GO TO 2.

2

DETECT MALFUNCTIONING PART

Check the following.

I

Harness connectors F104, M50 (CVT: F115, M81)

I

Harness for open or short between ECM and combination meter

©

Repair open circuit or short to ground or short to power in harness or connectors.
Check Audio circuit and other linked circuit for short to ground or short to power. Refer to
EL section.

3

CHECK SPEEDOMETER FUNCTION

Make sure that speedometer functions properly.

OK or NG

OK

©

GO TO 5.

NG

©

GO TO 4.

4

DETECT MALFUNCTIONING PART

Check the following.

I

Harness connectors M50, F104

I

Harness for open or short between combination meter and vehicle speed sensor

©

Repair harness or connectors. Check vehicle speed sensor and its circuit. Refer to EL
section.

5

CHECK INTERMITTENT INCIDENT

Check combination meter internal circuit for short to ground or short to power. Refer to EL section.
Perform “TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT”, EC-SR-114.

©

INSPECTION END

DTC P0500 VEHICLE SPEED SENSOR (VSS)

SR20DE

Diagnostic Procedure (Cont’d)

EC-261

EXCEPT MT MODELS WITH ABS AFTER VIN - P11U0548750

1

CHECK INPUT SIGNAL CIRCUIT

1. Turn ignition switch “OFF”.
2. Disconnect ECM harness connector and combination meter harness connector.
3. Check harness continuity between ECM terminal 86 and meter terminal 4.

Refer to wiring diagram.

Continuity should exist.

4. Also check harness for short to ground and short to power.

OK or NG

OK

©

GO TO 3.

NG

©

GO TO 2.

2

DETECT MALFUNCTIONING PART

Check the following.

I

Harness connectors F104, M50 (CVT: F115, M81)

I

Harness for open or short between ECM and combination meter

©

Repair open circuit or short to ground or short to power in harness or connectors.
Check Audio circuit and other linked circuit for short to ground or short to power power.
Refer to EL section.

3

CHECK SPEEDOMETER FUNCTION

Make sure that speedometer functions properly.

OK or NG

OK

©

GO TO 5.

NG

©

GO TO 4.

4

DETECT MALFUNCTIONING PART

Check the following.

I

Harness connectors M80, F114 and M81, F115

I

Harness for open or short between combination meter and vehicle speed sensor

©

Repair harness or connectors. Check vehicle speed sensor and its circuit. Refer to EL
section.

5

CHECK INTERMITTENT INCIDENT

Check combination meter internal circuit for short to ground or short to power. Refer to EL section.
Perform “TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT”, EC-SR-114.

©

INSPECTION END

DTC P0500 VEHICLE SPEED SENSOR (VSS)

SR20DE

Diagnostic Procedure (Cont’d)

EC-262