Nissan Frontier D22. Instruction — part 922
SRS-54
DISPOSAL OF AIR BAG MODULE AND SEAT BELT PRE-TENSIONER
3.
Connect deployment tool adapter [SST: KV99109000 (J44230)]:
for 2-door models or [J38381-80]: for 4-door models to deploy-
ment tool [SST: KV99106400 (J38381)] and driver air bag mod-
ule connector.
4.
Connect red clip of deployment tool [SST: KV99106400
(J38381)] to battery positive terminal and black clip to negative
terminal.
5.
The right side lamp on the deployment tool [SST: KV99106400
(J38381)], marked “DEPLOYMENT TOOL POWER”, should
glow green, not red.
6.
Press the button on the deployment tool [SST: KV99106400
(J38381)]. The left side lamp on the deployment tool [SST:
KV99106400 (J38381)], marked “AIR BAG CONNECTOR VOLTAGE”, will illuminate and the air bag mod-
ule will deploy.
CAUTION:
When deploying the air bag module, stand at least 5 m (16 ft) away from the air bag module.
Deployment of Passenger Air Bag Module (Outside of vehicle)
1.
Make an 8.5 mm (0.335 in) diameter hole in air bag module
bracket [SST: KV99105300 (J41246)] at the position shown.
2.
Firmly secure air bag module bracket [SST: KV99105300
(J41246)] in a vise.
3.
Match the two holes in air bag module bracket [SST:
KV99105300 (J41246)] (held in vise) and passenger air bag
module and fix them with two bolts [M8 x 25 - 30 mm (0.98 - 1.18
in)].
CAUTION:
If a gap exists between passenger air bag module and air bag
module bracket, use a piece of wood inserted in the gap to sta-
bilize the air bag module.
WRS242
LRS169
ARS185
ARS234
DISPOSAL OF AIR BAG MODULE AND SEAT BELT PRE-TENSIONER
SRS-55
C
D
E
F
G
I
J
K
L
M
A
B
SRS
4.
Connect deployment tool adapter [SST: KV991065S0 (J38381-
30)]: for 2-door models or [SST: J38381-65]: for 4-door models
to deployment tool [SST: KV99106400 (J38381)] connector and
passenger air bag module connector.
5.
Connect red clip of deployment tool [SST: KV99106400
(J38381)] to battery positive terminal and black clip to negative
terminal.
6.
The right side lamp on the deployment tool [SST: KV99106400
(J38381)], marked “DEPLOYMENT TOOL POWER”, should
glow green, not red.
7.
Press the button on the deployment tool [SST: KV99106400
(J38381)]. The left side lamp on the deployment tool [SST:
KV99106400 (J38381)], marked “AIR BAG CONNECTOR
VOLTAGE”, will illuminate and the air bag module will deploy.
CAUTION:
●
When deploying the air bag module, stand at least 5 m (16
ft) away from the air bag module.
ARS235
ARS236
SRS-56
DISPOSAL OF AIR BAG MODULE AND SEAT BELT PRE-TENSIONER
Deployment of Seat Belt Pre-tensioner (Outside of vehicle)
1.
Firmly anchor seat belt pre-tensioner in a vise, then cut webbing
off.
2.
Connect deployment tool [SST: KV99106400 (J38381)] and deployment tool adapter [SST: J38381-80
connector to seat belt pre-tensioner.
3.
Connect red clip of deployment tool [SST: KV99106400
(J38381)] to battery positive terminal and black clip to negative
terminal.
4.
The right side lamp on the deployment tool [SST: KV99106400
(J38381)], marked “DEPLOYMENT TOOL POWER”, should
glow green, not red.
5.
Press the button on the deployment tool [SST: KV99106400
(J38381)]. The left side lamp on the deployment tool [SST:
KV99106400 (J38381)], marked “AIR BAG CONNECTOR
VOLTAGE”, will illuminate and the seat belt pre-tensioner will
deploy.
CAUTION:
●
When deploying the seat belt pre-tensioner, stand at least 5 m (16 ft) away from the seat belt pre-
tensioner.
LRS205
LRS206
DISPOSAL OF AIR BAG MODULE AND SEAT BELT PRE-TENSIONER
SRS-57
C
D
E
F
G
I
J
K
L
M
A
B
SRS
DEPLOYMENT OF AIR BAG MODULE AND SEAT BELT PRE-TENSIONER WHILE MOUNTED IN
VEHICLE
When disposing of a vehicle, deploy air bag modules and seat belt pre-tensioners while they are mounted in
vehicle.
CAUTION:
When deploying air bag module or seat belt pre-tensioner, ensure vehicle is empty.
1.
Disconnect both battery cables and wait 3 minutes.
2.
Disconnect air bag module connector or seat belt pre-tensioner connector.
3.
Remove air bag module from steering wheel, disconnecting spiral cable from air bag module.
4.
Connect deployment tool [SST: KV99106400 (SST: J38381)] to air bag module and reattach module with
side bolts.
For passenger air bag module, use deployment tool adapter [SST: KV991065S0 (J38381-30)]: for 2-door
models or [SST: J38381-65]: for 4-door models to deployment tool [SST: KV99106400 (J38381)] connec-
tor. For driver air bag module, use deployment tool adapter [SST: KV99109000 (J44230)]:FOR 2-door
models or (J38381-80): 4-door models to attach air bag module to deployment tool [SST: KV99106400
(J38381)] connector.
5.
Connect red clip of deployment tool [SST: KV99106400
(J38381)] to battery positive terminal and black clip to negative
terminal.
6.
The right side lamp on the deployment tool [SST: KV99106400
(J38381)], marked “DEPLOYMENT TOOL POWER”, should
glow green, not red.
7.
Press the button on the deployment tool [SST: KV99106400
(J38381)]. The left side lamp on the deployment tool [SST:
KV99106400 (J38381)], marked “AIR BAG CONNECTOR
VOLTAGE”, will illuminate and the air bag module or seat belt
pre-tensioner will deploy.
DISPOSING OF AIR BAG MODULE AND SEAT BELT PRE-TENSIONER
Deployed air bag modules and seat belt pre-tensioners are very hot.
Before disposing of air bag modules and seat belt pre-tensioners,
wait at least 30 minutes and 10 minutes, respectively. Seal them in a
plastic bag before disposal.
CAUTION:
●
Never apply water to a deployed air bag module or seat belt
pre-tensioner.
●
Be sure to wear gloves when handling a deployed air bag
module or seat belt pre-tensioner.
●
No poisonous gas is produced upon air bag module or seat
belt pre-tensioner deployment. However, be careful not to
inhale gas since it irritates the throat and can cause chok-
ing.
●
Do not attempt to disassemble air bag module or seat belt pre-tensioner.
●
Air bag module or seat belt pre-tensioner cannot be reused.
●
Wash your hands clean after finishing work.
ARS359
SBF276H
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст