Nissan Frontier D22. Instruction — part 38
REAR INTERNAL GEAR AND FORWARD CLUTCH HUB
AT-121
[RL4R01A]
D
E
F
G
H
I
J
K
L
M
A
B
AT
REAR INTERNAL GEAR AND FORWARD CLUTCH HUB
PFP:31450
Components
ECS007KG
Disassembly
ECS007KH
1.
Remove rear internal gear by pushing forward clutch hub for-
ward.
2.
Remove thrust washer from rear internal gear.
3.
Remove snap ring from forward clutch hub.
4.
Remove end bearing.
5.
Remove forward one-way clutch and end bearing as a unit from
forward clutch hub.
6.
Remove snap ring from forward clutch hub.
LCIA0286E
SAT897A
SAT287G
AT-122
[RL4R01A]
REAR INTERNAL GEAR AND FORWARD CLUTCH HUB
Inspection
ECS007KI
REAR INTERNAL GEAR AND FORWARD CLUTCH HUB
●
Check gear for excessive wear, chips or cracks.
●
Check frictional surfaces of forward one-way clutch and thrust
washer for wear or damage.
●
Check spline for wear or damage.
SNAP RING AND END BEARING
●
Check for deformation or damage.
Assembly
ECS007KJ
1.
Install snap ring onto forward clutch hub.
2.
Install end bearing.
3.
Install forward one-way clutch onto clutch hub.
●
Install forward one-way clutch with flange facing rear-
ward.
4.
Install end bearing.
5.
Install snap ring onto forward clutch hub.
SAT902A
SAT903A
SAT901A
SAT904A
REAR INTERNAL GEAR AND FORWARD CLUTCH HUB
AT-123
[RL4R01A]
D
E
F
G
H
I
J
K
L
M
A
B
AT
6.
Install thrust washer onto rear internal gear.
●
Apply petroleum jelly to thrust washer.
●
Securely insert pawls of thrust washer into holes in rear
internal gear.
7.
Position forward clutch hub in rear internal gear.
8.
After installing, check to assure that forward clutch hub rotates
clockwise.
SAT906A
SAT907A
SAT905A
AT-124
[RL4R01A]
BAND SERVO PISTON ASSEMBLY
BAND SERVO PISTON ASSEMBLY
PFP:31615
Components
ECS007KK
Disassembly
ECS007KL
1.
Block one oil hole in O/D servo piston retainer and the center
hole in O/D band servo piston.
2.
Apply compressed air to the other oil hole in piston retainer to
remove O/D band servo piston from retainer.
3.
Remove D-ring from O/D band servo piston.
4.
Remove band servo piston assembly from servo piston retainer
by pushing it forward.
AAT112A
SAT909A
SAT910A
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст