Nissan Frontier D22. Instruction — part 720
DRIVE SHAFT
FAX-25
C
E
F
G
H
I
J
K
L
M
A
B
FAX
5.
Lock new large boot band securely with a suitable tool, then lock
new small boot band.
Installation
EDS00140
1.
Apply multi-purpose grease.
2.
Install bearing spacer onto drive shaft.
CAUTION:
Make sure that the bearing spacer is facing in the proper
direction.
3.
After installing wheel hub and wheel bearing, adjust wheel bear-
ing preload. Refer to
FAX-5, "PRELOAD ADJUSTMENT (2WD
FAX-6, "PRELOAD ADJUSTMENT (4WD MOD-
.
4.
When installing drive shaft, adjust drive shaft axial end play by
selecting a suitable snap ring.
a.
Temporarily install new snap ring on drive shaft in the same
thickness as the one that was removed.
SFA443B
SFA887
SFA846
SFA940
FAX-26
DRIVE SHAFT
b.
Set dial gauge on drive shaft end.
c.
Measure axial end play of drive shaft.
d.
If axial end play is not within the specified limit, select another
snap ring. Refer to
FAX-27, "DRIVE SHAFT AXIAL END PLAY"
5.
Install torsion bar spring. Refer to
.
6.
Install auto-lock free-running hub or drive flange and snap ring.
Refer to
FAX-11, "Removal and Installation"
Axial end play
: 0.10 – 0.45 mm (0.004 – 0.0177 in)
SFA847
SFA832B
SERVICE DATA AND SPECIFICATIONS (SDS)
FAX-27
C
E
F
G
H
I
J
K
L
M
A
B
FAX
SERVICE DATA AND SPECIFICATIONS (SDS)
PFP:00030
Wheel Bearing (Front)
EDS00141
2WD MODELS
4WD MODELS
Drive Shaft (4WD models)
EDS00142
*: The ZF100 type (wheel side) joint assembly has two types of boot material; one is made of rubber and the other is made of plastic. Do
not disassemble the joint assembly with the plastic boot. If the boot or joint is damaged, replace the drive shaft assembly.
DRIVE SHAFT AXIAL END PLAY
Wheel bearing axial end play
mm (in)
0 (0)
Wheel bearing lock nut
Tightening torque
N·m (kg-m, ft-lb)
34 - 39 (3.5 - 4.0, 25 - 29)
Return angle
degree
45
° - 60°
Wheel bearing starting torque
At wheel hub bolt
With new grease seal
N (kg, lb)
9.8 - 28.4 (1.0 - 2.9, 2.2 - 6.4)
With used grease seal
N (kg, lb)
9.8 - 23.5 (1.0 - 2.4, 2.2 - 5.3)
Wheel bearing lock nut
Tightening torque
N·m (kg-m, ft-lb)
78 - 98 (8 - 10, 58 - 72)
Retightening torque after loosening wheel
bearing lock nut
N·m (kg-m, in-lb)
0.5 - 1.5 (0.05 - 0.15, 4.3 - 13)
Axial end play
mm (in)
0 (0)
Turning angle
degree
15
° - 30°
Wheel bearing preload at wheel hub bolt
N (kg, lb)
7.06 - 20.99 (0.72 - 2.14, 1.59 - 4.72)
Drive shaft joint type
Final drive side
TS82F
Wheel side
ZF100*
Fixed joint axial end play limit
mm (in)
1 (0.04)
Diameter
mm (in)
Wheel side (D
1
)
29.0 (1.142)
Grease
Quality
Nissan Genuine Grease or
equivalent
Capacity
g (oz)
Final drive side
95 - 105 (3.35 - 3.70)
Wheel side
115 - 125 (4.06 - 4.41)
Boot length
mm (in)
Final drive side (L
1
)
95 - 97 (3.74 - 3.82)
Wheel side (L
2
)
96 - 98 (3.78 - 3.86)
LDIA0022E
Drive shaft axial end play
mm (in)
0.10 – 0.45 (0.004 – 0.0177)
FAX-28
SERVICE DATA AND SPECIFICATIONS (SDS)
DRIVE SHAFT END SNAP RING
*: Always check with the Parts Department for the latest parts information.
Thickness mm (in)
Part No.*
1.1 (0.043)
1.3 (0.051)
1.5 (0.059)
1.7 (0.067)
1.9 (0.075)
2.1 (0.083)
2.3 (0.091)
39253-88G10
39253-88G11
39253-88G12
39253-88G13
39253-88G14
39253-88G15
39253-88G16
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст